TF50-5 RHOMBUS-IND | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 1

Technical content

For other values & Custom Designs, contact factory.Specifications subject to change without notice.

15801 Chemical Lane, Huntington Beach, CA 92649-1595

Tel: (714) 898-0960 • Fax: (714) 896-0971 Rhombus Industries Inc. DLM_TF 1/98 Multi-Line Passive P/N Nominal Impedance Nominal Combined Delay DCR max. (Ohms) Line 1 (ns) Pin 2 to Pin 13 Line 2 (ns) Pin 3 to Pin 12 Line 3 (ns) Pin 4 to Pin 11 Line 4 (ns) Pin 5 to Pin 10 Line 5 (ns) Pin 6 to Pin 9 Electrical Specifications at 25O C 1, 2, 3 (Refer to Operating Specifications for Passive Delays page 2.) 1. Rise Times are measured from 10% to 90% points. 2. Delay Times measured at 50% points of leading edge. 3. Output (100% Tap) terminated through ZO to ground. D14-300 .300" Wide DIP

14 Pin Package

Detailed Drawing. See pg. 9 (TZB type) Standard Impedances: 50 - 75 - 100 Ω Stable Delay vs. Temperature: 100 ppm/O C Operating Temperature Range -55O C to +125O C Multi-Line Delay Modules

5 Independent Lines can be Cascaded

to Achieve Wide Range of Delays Applications include Video & Test Equipment 14 13 12 1 3 56742 9 811 10 IN1 IN2 IN3 OUT COMCOM IN5 IN4 OUT OUT OUT OUT DLM5 Schematic Diagram Delay Tolerances 50 Ohm Part Number Rise Time (ns) DCR max. (Ohms)

75 Ohm

(ns) DCR max. (Ohms)

100 Ohm

(ns) DCR max. (Ohms) Total (ns) Tap-to-Tap (ns) Electrical Specifications at 25O C 1, 2, 3 (Refer to Operating Specifications for Passive Delays page 2.) .120 (3.05) MIN. .020 (0.51) TYP. .050 (1.27) TYP. .100 (2.54) TYP. .275 (6.99) MAX. 1.450 (36.83) MAX. .300 (7.62) MAX. .320 (8.13) .290 (7.37) .350 (8.89) .310 (7.87) .010 (0.25) TYP. .030 (0.76) TYP. 8 10 70%60% 90% 100%80% 11 12 13 141 342 5 30% 6 7 20%IN 50%40%10% 18 17 16 15 COMCOM 19202122232425262728 TF Series Fast tr High Performance

20 Section 10-Tap

Fast Rise Time ( td / tr 10 ) High Bandwidth 0.35 / tr Low Distortion LC Network

10 Equal Delay Taps

Standard Impedances: 50 - 75 - 100 - 200 Ω Stable Delay vs. Temperature: 100 ppm/O C Operating Temperature Range -55O C to +125O C Dimensions in Inches (mm)