TEA1007 TEMIC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

Features

/C0068 Current consumption /C0118 2.5 mA /C0068 Ignition pulse typ. 150 mA /C0068 V oltage and current synchronization /C0068 Internal supply voltage control Block Diagram R = series resistancev Figure 1. Block diagram with typical circuitry

Figure 4. Functional diagram for resistive load and /C0097 min

Rev. A1, 28-May-96 4 (8) Absolute Maximum Ratings Reference point Pin 8 Parameters Symbol Value Unit Current consumption Pin 1 –IS 30 mA t<10 ms –is 60 Sync. currents: Pin 4 Pin 5 t<10 ms Pin 4 Pin 5 IsyncI IsyncV /C0034 isync.I /C0034 isync.V mA Input current Pin 3 –II 5 mA Input voltages: Pin 6 Pin 2 –V I V I /C0120 V S –V S/C0120 V I/C0120 /C0050 V Power dissipation Tamb =4 5°C Tamb = 85°C Ptot 400 225 mW Junction temperature Tj 125 °C Ambient temperature range Tamb 0 to 80 °C Storage temperature range Tstg –40 to +125 °C Thermal Resistance Parameters Symbol Value Unit Junction ambient DIP8 SO8 (P.C.) SO8 (ceramic) R thJA 200 220 140 K/W

Electrical Characteristics

Reference point Pin 8, unless otherwise specified Parameters Test Conditions / Pin Symbol Min Type Max Unit Mains supply Pin 1 –V S 13.5 17 V Current consumption IS 2.5 mA Sync. currents Pin 4 Pin 5 IsyncI. IsyncV 0.35 0.65 mA Output pulse current V S = 13.5 V , R G = 0, VG = 1.2 V Pin 2 IO 90 180 mA Output pulse width C /C0246 /t = 3.3 nF Pin 2 C /C0246 /t= 6.8 nF tp tp /C0109 /C0115 Charge current /C0127/C0080/C0104/C0097/C0115/C0101 /C0049/C0034 Pin 7 C /C0246 /t = 3.3 nF C /C0246 /t= 6.8 nF I/C0246 1 4.3 20 /C0109/C0065 /C0127/C0080/C0104/C0097/C0115/C0101 /C0050/C0034 Pin 7 It 1.3 mA Drive current Pin 6 Ii 0.5 /C0109/C0065 Balance between two half cycles V 6 = constant /C0068/C0246 /C0034 3 °

Phase 1 begins as soon as the mains voltage is applied. adjustable by means of R20 (Phase 2). following the adjustment of R22 and takes ca. 2 to 20 secs. complete time-constant is added to the time already run. voltage which settles at a level of ca. 15.5 V . Figure 7. Fading circuit for manual operation

Rev. A1, 28-May-96 7 (8) Dimensions in mm

Rev. A1, 28-May-96 8 (8) Ozone Depleting Substances Policy Statement It is the policy of TEMIC TELEFUNKEN microelectronic GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. TEMIC TELEFUNKEN microelectronic GmbH semiconductor division has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. TEMIC can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use TEMIC products for any unintended or unauthorized application, the buyer shall indemnify TEMIC against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. TEMIC TELEFUNKEN microelectronic GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 (0)7131 67 2831, Fax number: 49 (0)7131 67 2423