DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
WWW.MKSINST.COM T est Diagnostic Boards CALIBRATION, VOLTAGE MONITORING & TROUBLESHOOTING MKS voltage monitoring diagnostic boards offer a convenient and fast method for calibrating, testing and troubleshooting MKS Mass Flow Controllers, Baratron® Capacitance Manometers and other electronic instruments. Features Benefits
- Industr y standard DB-9, 15, 15HD, 25 and 37, male/f emale connectors
- One-to-one pin out configur ation
- Solder post test ter minals for each connector line
- Compact pac kage allows for testing, calibr ation and set up, and troub leshooting in tight spaces
- Diagnose prob lems without removing the instr ument from the system
- Monitor the “health” of the Baratron or Flo w Controller
- P erform a baseline on each type of MFC to understand what the response is under nor mal circumstances
- V erify power supply voltage level and condition
- Chec k for ground loops or stray voltages betw een the common and ground pins MKS test diagnostic printed circuit boards are configured with standard, male and female D-type connectors with a straight one-to-one pin out configuration. These boards can be inserted between the I/O connector of an instrument and it’s mating cable, providing easy and clean access to test pins connected directly to the instruments’ I/O contacts. This allows insitu monitoring of instrument input and output signals, supply power and ground quality. In addition, these boards can be used to calibrate and zero MKS Baratron ® Capacitance Manometers and Mass Flow Controllers. MKS Baratron® Capacitance Manometer with TDB-15 Voltage Monitoring Diagnostic Board Pressure & Vacuum Measurement Solutions
MKS products provided subject to the US and other country export regulations. Diversion or transfer contrary to U.S. or other export laws is prohibited. Specifications are subject to change without notice. Baratron® is a registered trademark of MKS Instruments, Inc., Andover, MA. Test Diagnostic Boards - 11/15 © 2009 MKS Instruments, Inc. All rights reserved. Part Number Description Connector Illustration TDB-9 Test diagnostic board with 9 pin D female to male TDB-15 Test diagnostic board with 15 pin D female to male TDB-15HD Test diagnostic board with 15 pin high density D female to male TCE-20 Test diagnostic board with 20 pin edge card female to male TDB-25 Test diagnostic board with 25 pin D female to male TDB-37 Test diagnostic board with 37 pin D female to male Diagnostic Board (P/N TDB-15) for Electrical Troubleshooting For instrument calibration, electronic testing and troubleshooting MKS recommends taking measurements directly at the interface connector of the unit. This eliminates erroneous noise, typically generated by incorrect grounding. Chassis Gnd Signal Com +15 VDC -15 VDC Power Com Signal Output TDB-15 14 13 12 11 10 9 87654321 Power Supply DC Voltage & AC Noise Measure Flow/Pressure Output Signal for Zeroing and Stability Measure Setpoint Signal Ground Loops or Stray Voltages Measure Valve Output for MFCs MKS Instruments, Inc. Global Headquarters
2 Tech Drive, Suite 201
Andover, MA 01810 Tel: 978.645.5500 Web: www.mksinst.com MKS Instruments, Inc. Pressure & Vacuum Measurement Solutions Six Shattuck Road Andover, MA 01810 Tel: 978.975.2350