TC7WG32FC TOSHIBA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Features

  • High-level output current: I OH/IOL = ±8 mA (min) a t V CC = 3 V
  • High-speed operation: t pd = 2.8 ns (typ.) a t V CC = 3.3 V,15pF
  • Operating voltage range: V CC = 0.9~3.6 V
  • 5.5-V tolerant inputs
  • 3.6-V power down protection outputs Marking Absolute Maximum Ratings (Ta = 25°C) Characteristics Symbol Value Unit Power supply voltage V CC −0.5~4.6 V DC input voltage VIN −0.5~7.0 V −0.5~4.6 (Note 1) DC output voltage VOUT −0.5~VCC + 0.5 (Note 2) V Input diode current IIK −20 mA Output diode current IOK −20 (Note 3) mA DC output current IOUT ±25 mA DC VCC/GND current I CC ±50 mA Power dissipation PD 150 (Note 4) mW Storage temperature Tstg −65~150 °C Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: V CC = 0V Note 2: High or Low State. IOUT absolute maximum rating must be observed. Note 3: VOUT < GND Note 4: Mounted on an FR4 board. (25.4 mm × 25.4 mm × 1.6 t, Cu Pad: 11.56 mm2) Pin Assignment (top view) TC7WG32FC CSON8-P-0.4 Weight: 0.002 g (typ.) G32 Product name 1 2 3 4 8 7 6 5 1A 1B 2Y GND 1Y 2B 2AVcc

Characteristics Symbol Value Unit Power supply voltage VCC 0.9~3.6 V Input voltage VIN 0~5.5 V 0~3.6 (Note 5) Output voltage VOUT 0~VC C (Note 6) V ±8.0 (Note 7) ±4.0 (Note 8) ±3.0 (Note 9) ±1.7 (Note 10) ±0.3 (Note 11) Output Current IOH/IOL ±0.02 (Note 12) mA Operating temperature Topr − 40~85 °C Input rise and fall time dt/dV 0~10 (Note 13) ns/V Note 5: V CC = 0V Note 6: High or Low state. Note 7: V CC = 3.0~3.6 V Note 8: V CC = 2.3~2.7 V Note 9: V CC = 1.65~1.95 V Note 10: VCC = 1.4~1.6 V Note 11: VCC = 1.1~1.3 V Note 12: VCC = 0.9 V Note 13: VIN = 0.8~2.0 V, VCC = 3.0 V > 1 1Y

Electrical Characteristics

Ta = 25°C Ta = −40~85°C Characteristics Symbol Test Condition VCC (V) Min Typ. Max Min Max Unit

0.9 V CC ⎯ ⎯ V CC ⎯

1.1~1.3 VCC × 0.7 ⎯ ⎯ VCC × 0.7 ⎯ 1.4~1.6 VCC × 0.65 ⎯ ⎯ VCC × 0.65 ⎯ 1.65~1.95 VCC × 0.65 ⎯ ⎯ VCC × 0.65 ⎯ High-level input voltage VIH ⎯ V 0.9 ⎯ ⎯ GND ⎯ GND 1.1~1.3 ⎯ ⎯ VCC × 0.3 ⎯ VCC × 0.3 1.4~1.6 ⎯ ⎯ VCC × 0.35 ⎯ VCC × 0.35 1.65~1.95 ⎯ ⎯ VCC × 0.35 ⎯ VCC × 0.35 Low-level input voltage V IL ⎯ V IOH = −0.3 mA 1.1~1.3 VCC × 0.75 ⎯ ⎯ VCC × 0.75 ⎯ IOH = −1.7 mA 1.4~1.6 VCC × 0.75 ⎯ ⎯ VCC × 0.75 ⎯ IOH = −3.0 mA 1.65~ 1.95 VCC -0.45 ⎯ ⎯ VCC -0.45 ⎯ High-level output voltage V OH VIN = VIH or VIL V IOL = 0.3 mA 1.1~1.3 ⎯ ⎯ VCC × 0.25 ⎯ VCC × 0.25 IOL = 1.7 mA 1.4~1.6 ⎯ ⎯ VCC × 0.25 ⎯ VCC × 0.25 IOL = 3.0 mA 1.65~ Low-level output voltage V OL V IN = VIL V Input leakage current IIN VIN = 0~5.5V 0~3.6 ⎯ ⎯ ±0.1 ⎯ ±1.0 μA Power off leakage current I OFF VIN = 0~5.5V VOUT = 0~3.6V 0 ⎯ ⎯ 1.0 ⎯ 10.0 μA Quiescent supply current I CC V IN = VCC or GND 3.6 ⎯ ⎯ 1.0 ⎯ 10.0 μΑ

Ta = 25°C Ta = −40~85°C Characteristics Symbol Test Condition VCC (V) Min Typ. Max Min Max Unit 0.9 ⎯ 19.8 ⎯ ⎯ ⎯ CL = 10 pF, RL = 1 MΩ 0.9 ⎯ 22.5 ⎯ ⎯ ⎯ CL = 15 pF, RL = 1 MΩ 0.9 ⎯ 30.0 ⎯ ⎯ ⎯ Propagation delay time tpLH tpHL CL = 30 pF, RL = 1 MΩ ns Input capacitance CIN ⎯ 3.6 ⎯ 3 ⎯ ⎯ ⎯ pF Power dissipation capacitance C PD (Note 14) 0.9 ~ 3.6 ⎯ 11 ⎯ ⎯ ⎯ pF Note 14: C PD is defined as the value of the internal equivalent capacitance which is calc ulated from the operating current consumption without load. Average operating current can be obtained by the equation: I CC (opr.) = CPD･VCC･fIN + ICC/2

Weight: 0.002 g (typ.)

RESTRICTIONS ON PRODUCT USE 20070701-EN GENERAL

  • The information contained herein is subject to change without notice.
  • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity an d vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA produc ts, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIB A products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconduct or Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.
  • The TOSHIBA products listed in this document are in tended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfuncti on or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage incl ude atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, et c.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk.
  • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations.
  • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringement s of patents or other rights of the third parties which may result from its use. No license is granted by implic ation or otherwise under any patents or other rights of TOSHIBA or the third parties.
  • Please contact your sales representative for product- by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.