TC7S00F TOSHIBA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

TOSHIBA CMOS DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC TC7SOOF, TC7SOOFU 2-INPUT NAND GATE The TC7S00 is a high speed C?MOS 2-INPUT NAND GATE TC7S00F fabricated with silicon gate C2MOS technology. It achieves high speed operation similar to equivalent LSTTL while maintaining the C2MOS low power dissipation. The internal circuit is composed of 3 stages including | buffer output, which enables high noise immunity and 4 stable output. All inputs are equipped with protection circuits against > static discharge or transient excess voltage. Output currents are 1/2 compared to TC74HC series models. SSOP5-P-0.95 TC7SOOFU

FEATURES

Vec=5V Ta=25°C = 28% Vcc (Min.) =2mA (Min.) SSOP5-P-0.65A : 0.006g (Typ.) © Wide Operating Voltage Range ... Vcc (opr) =2~6V MAXIMUM RATINGS MARKING CHARACTERISTIC SYMBOL RATING UNIT Type Name Supply Voltage Range DC Input Voltage -0.5~Vcc +0.5 DC Output Voltage Vout | -0.5~Vcc +0.5 Input Diode Current Output Diode Current PIN ASSIGNMENT (TOP VIEW) [DC Output Current | tour | #125 | mA | weGh Wve De Vec/Ground Current LL, [Power Dissipation |p | 200 _| mw | a IRE Storage Temperature =65~150 || Lead Temperature (105) cso BY Eur 1 2001-05-31

RECOMMENDED OPERATING CONDITIONS CHARACTERISTIC SYMBOL RATING UNIT Supply Voltage Input Voltage O-Vee Output Voltage Vout 0~Vcc Operating Temperature Input Rise and Fall Time tr, tf O~ 500 (Vcc =4.5V)| ns O~ 400 (Vcc =6.0V) DC ELECTRICAL CHARACTERISTICS Ta =25°C Ta = —40~85°C) CHARACTERISTIC | SYMBOL TEST CONDITION wec tm [rp Tmax amin [max] UNIT . 2.0} 1.5 15 righ Level Vin 45 | 3.15 3.15 v Input Voltage 6.0 42 42 Low-Level 2.0 0.5 0.5 Inwut Volt Vi 45 1.35 1.35 | Vv input Moltage 6.0 18 1.8 2.0 1.9] 2.0 1.9 . loH=-20nA | 4.5] 44] 45 44 pigh bevel Vou |YIN=VIH 60| 5.9] 60 5.9 Vv utput Voltage or VIL lon = —2mA 4.18 | 431 413 loH = -2.6mA 5.68 | 5.80 5.63 2.0 0.0 0.1 Low-Level lol = 202A 45 0.0 0.1 Outs Sy It Vo. |ViIn=VIH 6.0 0.0 01} y utput Voltage loL=2mA 0.17 | 0.26 0.33 lol =2.6mA 0.18 | 0.26 0.33 Input Leakage _ + + Current Vin=Vcc or GND +0.1 +1.0 A ; Me Quiescent Output currents are 1/2 compared to TC74HC series models. 2 2001-05-31

AC ELECTRICAL CHARACTERISTICS (C; = 15pF, Input t,=tf=6ns, Vcc = 5V) Ta =25°C CHARACTERISTIC SYMBOL TEST CONDITION MIN. [ TYP. [MAX.| UNIT Output Transition tTLH Time tTHL Propagation Delay toLH 7 ns Time tpHL AC ELECTRICAL CHARACTERISTICS (C, =50pF, Input t, = t= 6ns) Ta = 25°C Ta = —40~85°C) HARACTERISTI »YMBOL TEST NDITION NIT cranacrensnc |svmot] TEST CONDON Cyt a¥P AC] RIN TA wae 2.0 50 | 125 155 Output Transition tH 45 14 25 31 THL 6.0 12 | 21 26 . 2.0 48 | 100 Propagation Delay foun 45 12 20 © PHL 6.0 9 | 17 input Capactane | Cw [SCS = PO — [0 Power Dissipation pF Note 1: Cpp defined as the value of internal equivalent capacitance of IC which is calculated from the operating current consumption without load (refer to Test Circuit). Average operating current can be obtained by the equation hereunder. Ic (opr) = CpD‘Vcc'fiN + Icc SWITCHING CHARACTERISTICS TEST CIRCUIT lec (opr) TEST CIRCUIT 6n én: Lt V som Vee Vec=5V cc VIN 50% cece 1% eno ? Vv [re] 4 Lh vour tTLH : Lh 2 cL 530% VOH S$

4 Vout 50%

A 10% ‘a , . VOL input waveform is the same as that in | case of switching characteristics test. tpHL tpLH 3 2001-05-31

SSOP5-P-0.95, Unit : mm 2.8795 16°04 ae En 15 S| S| o + Nn a -

2 EH i] J4

foo) fen] Weight : 0.0169 (Typ.) 4 2001-05-31

SSOP5-P-0.65A Unit : mm 2.1+0.1 1.25+0.1 —— rt) al © 1-64 | 5 bari Pa fT + R 2-4 nN Oo] 2 S NA] or 3-8 (TI iB 4 oO ite) - fT + . o [~)} oO S oO Weight : 0.006g (Typ.) 5 2001-05-31

RESTRICTIONS ON PRODUCT USE 00070768 @ TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. @ The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. @ The products described in this document are subject to the foreign exchange and foreign trade laws. @ The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. @ The information contained herein is subject to change without notice. 6 2001-05-31