TC74AC00F

TC74AC00P TOSHIBA | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

TOSHIBA CMOS DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC TC74ACOOP, TC74ACO0F, TC74ACOOFN, TC74ACOOFT (Note) The JEDEC SOP (FN) is not available in QUAD 2-INPUT NAND GATE Japan. The TC74ACO00 is an advanced high speed CMOS 2-INPUT NAND GATE fabricated with silicon gate and double - layer _= —<y a 21 <a —— > metal wiring Cc MOS technology. a ; why ai 14 Gat It achieves the high speed operation similar to equivalent que 1 Bipolar Schottky TTL while maintaining the CMOS low ' oe . P (DIP14-P-300-2.54) FN (SOL14-P-150-1.27) The internal circuit is composed of 3 stages including buffer output, which provide high noise immunity and stable output. _——_ All inputs are equipped with protection circuits against static 4G ER 14 <2 discharge or transient excess voltage. 1 1 F (SOP14-P-300-1.27) FT (TSSOP 14-P-0044-0.65) FEATURES: Weight : 0.189 (Typ.) Weight : 0.069 (Typ.) @ High Speeds tog =3.8ns(typ.) at Voc = 5V PIN ASSIGNMENT « Low Power Dissipation -+++++++++-+ log = 4A(Max.) at Ta= 25°C + Symmetrical Output Impedance-| lon | = lo. =24mA(Min.) a1 Tl H 14 Vcc Capability of driving 500 1B 2 fe [ 13 4B transmission lines. v3 U) 4] 12 44 « Balanced Propagation Delays: tpLu=tpHL 2a 4 UJ i [] 11 4Y « Wide Operating Voltage Range--: Vcc (opr) = 2V~5.5V 2B 5 if 2. ] 10 3B + Pin and Function Compatible with 74F00 nv 6 Ti mei 3 3a GND 7 [J > 8 3Y (TOP VIEW) IEC LOGIC SYMBOL TRUTH TABLE (1) ~ a Ko (9) on a oe Pa | aa 2) Kan a 4g 3) ay 1 2001-05-17

Supply Voltage Range =0.5~7.0 — 40°C~65°C. From Ta = 65°C focinputvortage | Vin | —O5~Veev05 | V_] 85°C derating factor of DC Input Voltage Vin 0.5~Vec + 0.5 Vv 10 PWG choutd he applied Pear DC Output Current DC VecIGround Current [PowerDissipation | Po _|500(DIP)*/ 180 (SOP/TSSOP) Storage Temperature —65~150 RECOMMENDED OPERATING CONDITIONS PARAMETER VALUE UNIT Supply Voltage 2.0~5.5 Input Voltage Output Voltage Operating Temperature —40~85 Input Rise and Fall Time dt/dV O~ 20(Vec= 5 +0.5V) DC ELECTRICAL CHARACTERISTICS Ta =25°C Ta = -40-85°C PARAMETER SYMBOL TEST CONDITION Voc é é UNIT «) [aan [P. [MAX | MIN. [ MAX. : 2.0 | 1.50 1.50 High Level Vin 3.0 | 2.10 2.10 v P 9 5.5 | 3.85 3.85 2.0 0.50 0.50 5.5 1.65 1.65 19 | 2.0 1.9 low = — 50 uA 2.9 | 3.0 2.9 High - Level Vy Vin= 44 | 45 4.4 V Output Voltage 0H Viworv, lon = —4mA 3.0 | 2.58 2.48 HOFMIL J igg=—24mA | 4.5 | 3.94 3.80 2.0 0.0 0.1 lor = 50uA 3.0 0.0 0.1 45 0.0 0.1 Low - Level Vv Vin=V, Vv Output Voltage or we Tio. = 12mA 3.0 0.36 0.44 lop =24mA 45 0.36 0.44 [insu teakage Curent | tw _|Vin=Vecor GND rss[ — [= [zor] = [eto[ Vin=Vec or GND [ss] — | = [40] = | 400 |” * : This spec indicates the capability of driving 500 transmission lines. One output should be tested at a time for a 10ms maximum duration. 2 2001-05-17

AC ELECTRICAL CHARACTERISTICS (C, = 50pF, R.= 5000 , Input t, = t= 3ns) PARAMETER svuao. | TEST CONDITION Ta=~40~85°C] VeelV)| MIN. | T¥e. [MAX | min. | maxX. | Propagation Delay Time fee | 2330 = | 43 P33] 8 | 38 | | Input Capacitance Picow fo fT to | = fT to com [CE = | = P= HP Note (1) Cpp is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption. Average operating current can be obtained by the equation: lcc(opr.) =C pp: Vec* fin +lcc/4 (per Gate ) 3 2001-05-17

DIP 14PIN PACKAGE DIMENSIONS (DIP14-P-300-2.54) Unit in mm 1 8 % | og = e- g Soo s sss — yf ___19.75uax 19.2540.2 FaQayagay alg | —s ‘° 2.0051 paso. 05:0. ea asTy re] 0.25G Weight : 0.96g (Typ.) SOP 14PIN (200mil BODY) PACKAGE DIMENSIONS (SOP14-P-300-1.27) Unit in mm 14 8 af a ; 1 7 10.8MAX. 10.320.2 a x a? Ped =| 2 | “3 3. Py 0.80.2 Weight : 0.18g (Typ.) 4 2001-05-17

SOP 14PIN (150mil BODY) PACKAGE DIMENSIONS (SOL14-P-150 -1.27) Unit in mm (Note) This package is not available in Japan. 14 8 oe eEES al a s| 6 HH HEE >) 1 7 O.515TYP_ 0.42=0.07 So25G) 8.6520.1 x Pea 5 io 5 S 5 é S 0.70.3 Weight : 0.12g (Typ.) TSSOP 14PIN (170mil BODY) PACKAGE DIMENSIONS (TSSOP14-P-0044-0.65) Unit in mm 14 8 Hoggaag DOAPA AA a] 3 3] 3 Toidggyg hoaa qd L ) osstye 5.25MAX 4 50204 ex / 8 gel & 5 Weight : 0.06g (Typ.) 3 5 2001-05-17

RESTRICTIONS ON PRODUCT USE 00070768 @ TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. @ The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. @ The products described in this document are subject to the foreign exchange and foreign trade laws. @ The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. @ The information contained herein is subject to change without notice. 6 2001-05-17