TC3X4L INFINEON | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 49
Technical content
User Manual Please read the Important Notice and Warnings at the end of this document V1.2 www.infineon.com TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09 TriBoard TC3X4L TriBoard Manual TC3X4L Hardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 About this document Scope and purpose The User Manual provide information about using, configuration and connecting the TriBoard with Infineon AURIX™ TC3X4 LQFP device. The manual provide informat ion for different hardware types. There exist different hardware with Through Hole socket (TriBoard TC3X4L TH) and soldered devices (TriBoard TC3X4L). The schematic is identically for the all boards if not other mentioned in chapter schematic. The placing on the boards is the same, all components are on the same location. Intended audience Design, verfication, test and software engineers will use this document to ge t an understanding of the functionality and connections of the TriBoard.
User Manual TOC-2 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09 TriBoard Manual TC3X4L Hardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 Table of Contents Table of Contents
User Manual TOC-3 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09 TriBoard Manual TC3X4L Hardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 Table of Contents
User Manual 1-1 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09 TriBoard Manual TC3X4L Hardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 Introduction 1I n t r o d u c t i o n We congratulate you on your purchase of the TriCore Evaluation Board. This kit is a versatile tool, providing quick access to the capabilities of TriCore's powerful architecture. Applications can be developed easily. The Evaluation Board is equipped with a variety of memories and peripherals for connection to the environment. There is also an interface for the On Chip Debugging Features (OCDS1 and DAP). The Evaluation Board allows easily the development of TriCore applications with the corresponding tools. Subsequently, the applications can be downloaded and can be tested with the powerful debugger software. This TriBoard Hardware Manual familiarizes you with the TriCore Evaluation Board and guides you through the initial configuration of the TriBoard. For detailed technical information about the TC3X4 LQFP (e .g. TC374, TC364) please refer to the User Manual of the used device.
User Manual 2-1 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09 TriBoard Manual TC3X4L Hardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0
Features
2.1 Summary of Features
– Infineon’s TC3X4 (TC374, TC364) AURIX™ 2G Controller in LQFP-144 Package –F l e x R a y ™ 1) Transceivers – High Speed CAN Transceivers (CAN-FD capable) – USB to UART bridge – Ethernet PHY –S e r i a l E e p r o m –L I N T r a n s c e i v e r – Crystal 20MHz (default) or External Clock – USB miniWiggler JDS for easy debugging – 8 Low Power Status LEDs – 8-DIP switches for configuration – access to all pins of controller – 100mm x 160mm (EURO-Board) Connectors The TC3X4L TriBoard offers a wide variety of connectors: – Standard power connector – Micro USB connector for ASC Interface (ASC0) and miniWiggler – RJ45 connector for Ethernet – 16-pin header for JTAG interface (OCDS) – 2 x 10-pin header for DAP and DAP_SCR – 10pin (2x5) Header for LIN Transceiver (LIN) – 2 x 10pin (2x5) Header for CAN High Speed Transceiver (CAN0 and CAN1) – 2 x 10pin (2x5) Header for FlexRay™ (ERAY-A and ERAY-B) – four 80-pin connectors (male) + four 80-pin connectors (female) with all I/O signals – optional ETK connector – optional 6pin (IEEE1394) Socket for HSCT Components – Infineon’s Multi Voltage Safety Micro Processor Supply TLF35584QV – Three LEDs to validate power supply (5Volt / 3,3 Volt / 1,25 Volt) – LED indicating safe state signal 2 from TLF35584 – LED indicating /HDRST (ESR0) active state – LED indicating activ miniWiggler JDS – LED switched via DAS software – 2 x Infineon’s FlexRay™ Transceiver TLE9221SX – 2 x Infineon’s High Speed CAN-Transceiver TLE9251VSJ – Infineon’s LIN-Transceiver TLE 7259-3GE – USB to UART bridge FT2232HL (FTDI) – Single-Chip/Port 10/100M Ethernet PHYCEIVE R with Auto MDX RTL8201FI-VC-CG (Realtek) – 8 general purpose LEDs –2 K I 2C Serial Eeprom with EUI-48™ 2) Node Identity (MICROCHIP) 1) FlexRay™ is a trademark of FlexRay Consortium.
User Manual 2-2 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09 TriBoard Manual TC3X4L Hardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 –R e s e t s w i t c h –E n a b l e s w i t c h – Generic switch – 4-pin Dip switch Zero Ohm Bridges Zero Ohm resistors give the flexibility to configure the systems functionality.
2.2 Block Diagram
Figure 2-1 TriBoard Block Schematic 2) EUI-48™ is trademarked by IEEE Micro USB miniWiggler OCDS1 USB XTAL FlexRay™ Transceiver Transceiver TxCAN0 TxCAN1 RxCAN 0 RxCAN1 TC3X4 (e.g. TC374, TC364) TriCore CPU PLLCAN0 CAN1 ERAY B ERAY A TX0 RX0
8 LED’s
(P33.4 up to P33.7, P20.11 up to P20.14) Serial EEPROM with EUI-48™ RMII PHY Twisted Pair RJ45 LIN LIN Transceiver TX1 RX1 HSCT optional HSCT - TX/RX I²C WAKEUP QSPI2 Multi Voltage Safety Micro Processor Supply TLF35584QV ENA
User Manual 2-3 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09 TriBoard Manual TC3X4L Hardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0
2.3 Placement
Figure 2-2 TriBoard TC3X4L (TH) V1.0 Placement U201 X404 S502 X306 U307 Y301 X604 X402 S201 X201 X305 X304 X303 C303 D401 BU401 D402 U401 Y401 Y201 T301 T302 X301X302 X602X603 X601 D302 D303 D304 D305 D306 D307 D308 D309 D505 D506 D507D504 X401 X501 S501U502 D508 U501 L502 L501 C502 C501 R501 S202 X502 X406 DAP
User Manual 3-1 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09 TriBoard Manual TC3X4L Hardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 TriBoard Information
3 TriBoard Information
3.1 Soldered board
TriBoard TC3X4L V1.0 is the soldered board and will be available only with usable devices. Please see also chapter Usable devices.
3.2 Socketed board
TriBoard TC3X4L TH V1.0 is the socketed board.
3.2.1 Usable devices
Note: Note: Please check always the latest manu al for complete list of usable/tested devices. The board can be used with the following devices:
- T C 3 7 4
- TC364DP-64F300 W Note: For TC364: AN42 is connected directly to ground and AN43 is connected to VDDM via R223. Additional there is a capacitor (CB206) between AN43 and AN42.
3.2.2 Restricted usable devices
- N o n e
3.3 Power Supply
All needed voltages are generated via Infineon’s Multi Voltage Safety Micro Processor Supply TLF35584QV and via the microcontroller itself (+1,25V). The supply device is available as two different devices: TLF35584QVVS1 -> +5V standby voltage, +5V TriCore supply (V_UC) TLF35584QVVS2 -> +3,3V standby voltage, +3,3V TriCore supply (V_UC) Dependent of the assembled device the board works with 5V or 3,3V IO. The TLF35584QV provide the following voltages: +3,3V or +5V for standby (connected to VEVRSB) +3,3V or +5V for TriCore (connected to VEXT) +5V communcation supply (used by CAN and FlexRay™ transceivers) +5V voltage reference (connected to VDDM and VAREFx) +3,3V via LDO directly from pre regulator (used by Ethernet PHY) Applying a stable supply voltage causes the power on reset after a short period. The three LED's (V_UC, +3.3V, +1V25) indicate the status of the on board generated voltages. A manual power on reset is executed by pressing the reset button. The Board has to be connected to a +3,5V to +40V DC power supply. The power consumption is not specified yet but a supply with 12V and 500mA is recommended. The pinout for the supply connector is shown in Figure 6-3. There can be used any standard power pack with a connector where the positive line is surrounded by the ground line.
User Manual 3-2 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09 TriBoard Manual TC3X4L Hardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 TriBoard Information
3.3.1 Failsafe handling
In case that the device don’t contains a program whic h disable or service the window watchdog and error pin monitor of the TLF35584 then the TLF35584 is going to a FAILSAFE state where all supplies are switched off. This state can be left via reconnect the power plug or via the ENA button (S502). In this case you must connect a debugger which is able to disable the window watchdog and error pin monitor to reprogram the microcontroller. In the default state of the board the switching to FAILSAFE state is switched off via resistor R508. If you will use/evaluate all safety features of the TLF35584 make sure that R509 is assembled and R508 is not assembled. Make sure that you have a proper initialization of TLF35584 in your softare. Resistor R508 and R509 are red marked in the following Figure 3-1: Figure 3-1 Resistors for TLF35584 Safety feature handling with switch on
3.4 LEDs
There are 15 LEDs on board: – D504 RST (red) -> RESET LED indicate the reset state of the board (/ESR0) – D505 +1V25 (green) -> +1V25 power supply indication – D506 +3V3 (green) -> +3,3V power supply indication – D507 V_UC (green) -> +5V/+3,3V power supply indication – D508 SS2 (green) -> safe state signal 2 indication – D402 ACT (green) -> on board miniWiggler JDS is ACTIV – D401 RUN (blue) -> Debug RUN mode (switched by DAS Server) U201 R395 X404 R212 S502 R222 CB205 R379 R372 C305 C310 X306 CB313 CB314 CB315 C311 U307 Y301 X604 R249 R246 R245 R244 X402 S201 R377 R204 R205 R215 R214 X201 X305 X304 X303 R240 R236 R234 R232 R230 R223 R361 R359 R211 D301 CB206 C303 U408U407 U406 R451 R455 R456 R454 R446 R444 CB419 CB418 CB417 CB416 CB415 CB414 D401 R430 R429 R423 CB405 C402 R411 BU401 L401 D402 R401 CB401 U404 U401 Y401 CB408 R403 R402 CB402 R344 R524 R424 R425 R426 R427R428 CB520 R201 CB204 R203 R202 C201 C202 R206 R207 Y201 R337R357 R324 R399 R391 R392 R393 R394 R396 R397 CB309 R532 C301C302 R439 R531 R335 R336 R355 R356 U305 T301T302 X301X302 X602X603 X601 D302 D303 D304 D305 D306 D307 D308 D309 D505 D506 D507D504 X401 X501 S501 R354 C519 R452 CB203 R213 R216 R398 U502 C505 D508 U501 L502 L501 CB501 C502 C507 C509 C508 C501 C503 C504 R501 R507 R508 R509 CB502 R231 R233 R235 R237 R241 R255 R256 R390 R375 R376 R348R349 R525 S202 X502 R346 R347 R457 X406 C522 CB316 CB317 U308 R248
User Manual 3-3 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09 TriBoard Manual TC3X4L Hardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 TriBoard Information
3.5 Clock
On the board is a fixed crystal with 20MHz assembled. You can change this by replacing Y101 (soldered).
3.6 USB Connector
The USB connector is used for connection to a PC. Via the USB it is possible to power the board, using the ASCLIN0 as serial connection via USB and Debugging via DAS. For the pinout of USB socket see Figure 6-4. NOTE: Before connecting the board to the PC, make sure th at the actual DAS software is installed on the PC. For actual DAS software please contact your local FAE. The software can also be found on: DAS website
3.6.1 Serial Connection to PC
After the first connection of USB to a PC the needed driver will be installed automatically. During this there will be created a new COM port on PC. This COM port can be used to communicate with the board via ASCLIN0 of the the Generic Bootstrap Loader via CAN or ASCLIN0 via P15.2 and P15.3 you must: – remove R436 and R437 (this disconnect th e serial connection from P14.0 and P14.1) – remove R301 and R302 (this disconnect the CAN0 transceiver from P20.7 and P20.8) – assemble R438 and R440 with 0R resistor (size 0603) to connect P15.2 and P15.3 to serial connection – assemble R303 and R304 with 0R resistor (size 0603) to connect P14.0 and P14.1 to CAN0 transceiver The mentioned resistors are red marked in Figure 3-2. Figure 3-2 Resistors for ASC connection (ASC0) X703 CB511 R388 R380 R378 Q301 R368 R371 R382 R419 R440 R369 R367 C320 C317 C316 C315 C314 C313 C312 Q403 R389 R383 R385 R370 CB 311 CB312 C208 C207 C205 C204 C203 R433 R523 R431 R381 R314 R252 R250 R251R253 R254 CB202 R208 R408 U306 R521 R238 R365 R364 R363 R362 R360 CB310 C304 R449 R448 R447 R445 R443 R413 U405 L402 CB413 C403 D403 R404 C401 R450 R442 R441 CB412 CB411 CB410 C405 C404 R422 R421U403 Q402 Q401 R412 C406 R420 R414 R418 R417 R416 R415 R410 R409 CB407 CB403 R407 U402 R406 R405 CB406 CB404 R305 R306 R308 R309 R315R316 R318 R319 R522 R301 R311 R341 R340 R321 R322 R220 R221 R533 R323 R343 CB301 CB302 CB512 CB513 CB515 CB516 CB517 CB518 CB519 R537 R307 R317 R538R534 R513 R535 R536 C515 R511 R512 R510 Q502 Q504 Q503 X702 X704X701 U301U302 R302 R342 CB303 CB304 CB305 CB306 CB307 CB308 R303 R304 R338 R330 R331 R358 R350 R351 U303U304 R332 R334 R333 R352 R353 R320 CB201 R209 CB510 R520 D503 R505 R504 C510 R502 R506 Q505 Q501 D501 C512 C511 D502 R503 R239 R312 R436 R437 R438 R313 R373 R374 Q506 L503 C520 C521 C506 CB506 U503 CB409R386 C306
User Manual 3-4 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09 TriBoard Manual TC3X4L Hardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 TriBoard Information 3.6.2 miniWiggler JDS The miniWiggler JDS is a low cost debug tool which allows you access to the JTAG of the device. Make sure that you have the latest DAS release. Debugging is possible via the DAS Server ‘UDAS‘. Please contact your prefered debug vendor for support of DAS. If you have connected the board to the PC and there runs the DAS server, then a working connection is visible via the green ACTIV LED. The status RUN LED is switched on/off through the DAS Server, depending on the used debugger (client). IMPORTANT: Make sure that there is no or a trista ted connection on X401 (OCDS1) and X402 (DAP) if the ACTIV LED is on. Per default the miniWiggler is connected to the DAP. If resistors R214, R215 and R216 assembled (default) then the standard DAP is connected to miniWiggler. If all this resistors are not assembled then the miniWiggler can’t be used. In this case only the DAP connectors X402 and X406 can be used. See Figure 3-7.
3.7 FlexRay™ (E-RAY)
The board has 2 IDC10 plugs for FlexRay™ Communication (c hannel A and B) with up to 10 Mbit/s. For the pinout of the plugs see Figure 6-5. You can use a IDC female connector with crimpconnector, flat cable and SUB-D 9 plug with crimpconnector to have a 1:1 adapter to SUB-D 9. The transceiver are connected to the TriCore device via zero ohm resistors (R320 up to R324 and R340 up to R344) which must be removed to use the ports outside. The error state of transceiver channel A can be read out via P10.2. error state of transceiver channel A can be read out via P20.9. For more information look in the user manual for TC3X4 LQFP.
3.8 Serial Eeprom
The I2C via P15.4 and P15.5 of the TC3X4 is connected to a serial EEPROM with a size of 2KBit (2 x 128 x 8). The slave address of this EEPROM is 0x50. The upper half of the array (80h-FFh) is permanently write-protected. Write operations to this address range are inhibited. Read op erations are not affected. This upper half contains a pre- programmed EUI-48™ node address which can be used as MAC ID for Ethernet. The other 128 bytes are writable by customer. To disconnect (disable) the EEPROM remove resistor R348 and R349.
3.9 MultiCAN
On the board are two CAN transceiver connected to the CAN0 and CAN1 of TC3X4 LQFP. The transceivers are connected to two IDC10 plug. For the pinout of IDC10 plug see Figure 6-6. You can use a IDC female connector with crimpconnector, flat cable and SUB-D 9 plug with crimpconnector to have a 1:1 adapter to SUB-D 9. The transceiver are connected to the TriCore device via zero ohm resistors (R301 up to R304 and R311 up to R314) which must be removed to use the ports outside.
User Manual 3-5 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09 TriBoard Manual TC3X4L Hardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 TriBoard Information
3.10 LIN
On the board is one LIN transceiver connected to the ASCLIN1 on TC3X4 LQFP (P15.0 and P15.1). The transceiver are connected to one IDC10 plug. For the pinout of IDC10 plug see Figure 6-7. You can use a IDC female connector with crimpconnector, flat cable and SUB-D 9 plug with crimpconnector to have a 1:1 adapter to SUB-D 9. To disconnect the LIN remove resistor R364 and R365. The LIN can be used in master and in slave mode. For the master mode there is per default a pull-up of 1K (R360) and a capacitor of 1nF (C304) on the BUS assembled. For using the LIN in slave mode the pull-up resistor R360 must be removed and maybe the capacitor changed to a smaller value (e.g. 220pF). The mentioned resistor and capacitor are red marked in Figure 3-3 Figure 3-3 Components for LIN Master Mode
3.11 Ethernet
The TriBoard provide a RJ45 connector (X306) for twiste d pair ethernet connections.The TriBoard use a Realtek Single-Chip/Port 10/100M Ethernet PHYCEIVER with Auto MDX RTL8201FI-VC-CG as physical interface device. For more information about the ethernet modul see TC3X4 User’s Manual, about the PHY see the RTL8201FI datasheet. For the pinout of RJ45 see Figure 6-9. The PHY is connected to the TriCore device via resistors and resistor arrays (R368 up to R374) which must be removed to use the ports outside. For the connection between TriCore and PHY is used RMII. For MD connection there is used P00.0 and P02.8. To use this communication way please make sure that R376 is not assembled (default). For R376 position please see also Figure 4-4. Note: Please note that the RGMII interface can’t be used of limited pin availability. Therefore Gigabit is not usable with this board only 10M and 100M. X703 CB511 R388 R380 R378 Q301 R368 R371 R382 R419 R440 R369 R367 C320 C317 C316 C315 C314 C313 C312 Q403 R389 R383 R385 R370 CB 311 CB312 C208 C207 C205 C204 C203 R433 R523 R431 R381 R314 R252 R250 R251R253 R254 CB202 R208 R408 U306 R521 R238 R365 R364 R363 R362 R360 CB310 C304 R449 R448 R447 R445 R443 R413 U405 L402 CB413 C403 D403 R404 C401 R450 R442 R441 CB412 CB411 CB410 C405 C404 R422 R421U403 Q402 Q401 R412 C406 R420 R414 R418 R417 R416 R415 R410 R409 CB407 CB403 R407 U402 R406 R405 CB406 CB404 R305 R306 R308 R309 R315R316 R318 R319 R522 R301 R311 R341 R340 R321 R322 R220 R221 R533 R323 R343 CB301 CB302 CB512 CB513 CB515 CB516 CB517 CB518 CB519 R537 R307 R317 R538R534 R513 R535 R536 C515 R511 R512 R510 Q502 Q504 Q503 X702 X704X701 U301U302 R302 R342 CB303 CB304 CB305 CB306 CB307 CB308 R303 R304 R338 R330 R331 R358 R350 R351 U303U304 R332 R334 R333 R352 R353 R320 CB201 R209 CB510 R520 D503 R505 R504 C510 R502 R506 Q505 Q501 D501 C512 C511 D502 R503 R239 R312 R436 R437 R438 R313 R373 R374 Q506 L503 C520 C521 C506 CB506 U503 CB409R386 C306
User Manual 3-6 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09 TriBoard Manual TC3X4L Hardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 TriBoard Information
3.12 HSCT (optional)
The TriBoard provide a footprint of IEEE 1394 socket (X201) for connection to other TC3XX via HSCT. Note: Don’t use X201 for connection to any IEEE 1394 device, this can destroy the board and/or the connected device. For connect two TriBoards you need to assemble this socket (Lumberg 2415 01) on each board and connect the boards with a standard 6 pin IEEE 1394 cable. For the pinout of socket see Figure 6-8.
3.12.1 High speed with HSCT
For use the HSCT connection between two board you need to remove 5 resistors to have a very short connection between device and connector. On the TC3X4L Triboard this 5 resistors are R250, R251, R252, R253 and R254 (red marked in Figure 3-4). This resistors needs to be removed. longer available on the 80 pin samtec connectors. Figure 3-4 Resistors for high speed HSCT X703 CB511 R388 R380 R378 Q301 R368 R371 R382 R419 R440 R369 R367 C320 C317 C316 C315 C314 C313 C312 Q403 R389 R383 R385 R370 CB 311 CB312 C208 C207 C205 C204 C203 R433 R523 R431 R381 R314 R252 R250 R251R253 R254 CB202 R208 R408 U306 R521 R238 R365 R364 R363 R362 R360 CB310 C304 R449 R448 R447 R445 R443 R413 U405 L402 CB413 C403 D403 R404 C401 R450 R442 R441 CB412 CB411 CB410 C405 C404 R422 R421U403 Q402 Q401 R412 C406 R420 R414 R418 R417 R416 R415 R410 R409 CB407 CB403 R407 U402 R406 R405 CB406 CB404 R305 R306 R308 R309 R315R316 R318 R319 R522 R301 R311 R341 R340 R321 R322 R220 R221 R533 R323 R343 CB301 CB302 CB512 CB513 CB515 CB516 CB517 CB518 CB519 R537 R307 R317 R538R534 R513 R535 R536 C515 R511 R512 R510 Q502 Q504 Q503 X702 X704X701 U301U302 R302 R342 CB303 CB304 CB305 CB306 CB307 CB308 R303 R304 R338 R330 R331 R358 R350 R351 U303U304 R332 R334 R333 R352 R353 R320 CB201 R209 CB510 R520 D503 R505 R504 C510 R502 R506 Q505 Q501 D501 C512 C511 D502 R503 R239 R312 R436 R437 R438 R313 R373 R374 Q506 L503 C520 C521 C506 CB506 U503 CB409R386 C306
User Manual 3-7 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09 TriBoard Manual TC3X4L Hardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 TriBoard Information
3.13 ADC
On this boards are 5 ADC channels prepared with a lo w pass filter. On pin AN7, AN20, AN21, AN44 and AN45 is assembled a capacitor of 47nF and a serial resistor of 4,7K. The filter components are red marked in the following figures (Figure 3-5 and Figure 3-6). Figure 3-5 Filter components of ADC channels on Top Side U201 R395 X404 R212 S502 R222 CB205 R379 R372 C305 C310 X306 CB313 CB314 CB315 C311 U307 Y301 X604 R249 R246 R245 R244 X402 S201 R377 R204 R205 R215 R214 X201 X305 X304 X303 R240 R236 R234 R232 R230 R223 R361 R359 R211 D301 CB206 C303 U408U407 U406 R451 R455 R456 R454 R446 R444 CB419 CB418 CB417 CB416 CB415 CB414 D401 R430 R429 R423 CB405 C402 R411 BU401 L401 D402 R401 CB401 U404 U401 Y401 CB408 R403 R402 CB402 R344 R524 R424 R425 R426 R427R428 CB520 R201 CB204 R203 R202 C201 C202 R206 R207 Y201 R337R357 R324 R399 R391 R392 R393 R394 R396 R397 CB309 R532 C301C302 R439 R531 R335 R336 R355 R356 U305 T301T302 X301X302 X602X603 X601 D302 D303 D304 D305 D306 D307 D308 D309 D505 D506 D507D504 X401 X501 S501 R354 C519 R452 CB203 R213 R216 R398 U502 C505 D508 U501 L502 L501 CB501 C502 C507 C509 C508 C501 C503 C504 R501 R507 R508 R509 CB502 R231 R233 R235 R237 R241 R255 R256 R390 R375 R376 R348R349 R525 S202 X502 R346 R347 R457 X406 C522 CB316 CB317 U308 R248
User Manual 3-8 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09 TriBoard Manual TC3X4L Hardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 TriBoard Information Figure 3-6 Filter components of ADC channels on Bottom Side
3.14 Other peripherals
For all other peripherals there are no special plugs on the board. The peripheral signals are available on the different connectors. See “Connector Pin Assignment” on Page 6-1.
3.15 Toggle LED’s
The status LED’s are low active and can be controlled by Software. Port 20 pin 11 up to pin 14 are connected to single LED’s (D306... D309) and powered by the normal microcontroller voltage. Port 33 pin 4 up to pin 7 are connected to single LED’s (D302... D305) and powered by the standby voltage. This means that this LED’s can be are activ also when the board is in standby mode and only the standby voltage available (port 33 is powered by VEVRSB pin which is connected to standby supply of TLF35584). In this case the port pins are controlled by the standby controller if available.
3.16 Buttons
On the board are three buttons. The reset button (S501) will apply a warm power on reset to the device. The ENA button (S502) will be used to enable/wakeup the TLF35584. The P33.11 button (S202) can be used by software as input. Also can this button used by the standby controller to react on an event when only standby supply is available (e.g. wakeup the TLF35584 via P33.10). X703 CB511 R388 R380 R378 Q301 R368 R371 R382 R419 R440 R369 R367 C320 C317 C316 C315 C314 C313 C312 Q403 R389 R383 R385 R370 CB 311 CB312 C208 C207 C205 C204 C203 R433 R523 R431 R381 R314 R252 R250 R251R253 R254 CB202 R208 R408 U306 R521 R238 R365 R364 R363 R362 R360 CB310 C304 R449 R448 R447 R445 R443 R413 U405 L402 CB413 C403 D403 R404 C401 R450 R442 R441 CB412 CB411 CB410 C405 C404 R422 R421U403 Q402 Q401 R412 C406 R420 R414 R418 R417 R416 R415 R410 R409 CB407 CB403 R407 U402 R406 R405 CB406 CB404 R305 R306 R308 R309 R315R316 R318 R319 R522 R301 R311 R341 R340 R321 R322 R220 R221 R533 R323 R343 CB301 CB302 CB512 CB513 CB515 CB516 CB517 CB518 CB519 R537 R307 R317 R538R534 R513 R535 R536 C515 R511 R512 R510 Q502 Q504 Q503 X702 X704X701 U301U302 R302 R342 CB303 CB304 CB305 CB306 CB307 CB308 R303 R304 R338 R330 R331 R358 R350 R351 U303U304 R332 R334 R333 R352 R353 R320 CB201 R209 CB510 R520 D503 R505 R504 C510 R502 R506 Q505 Q501 D501 C512 C511 D502 R503 R239 R312 R436 R437 R438 R313 R373 R374 Q506 L503 C520 C521 C506 CB506 U503 CB409R386 C306
User Manual 3-9 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09 TriBoard Manual TC3X4L Hardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 TriBoard Information
3.17 Debug System
3.17.1 OCDS1
The OCDS1 signals are connected to the IDC16 plug (X401). They work with the port supply of Microcontroller (+5V default or +3,3V). For pinout of the connector see Figure 6-10. You can connect any debugger to this connector. The signals /BRKIN and /BRKOUT are not connected per defa ult. If you need this si gnals in the connector then assemble R424 and R425 or R426 with a 0R resistor. If you connect a debug hardware make sure that the miniWiggler JDS (see “miniWiggler JDS” on Page 3-4) is not activ (ACTIV LED is off) and on the DAP connector (X402) is no hardware connected or the hardware is tristated. If the ACTIV LED is on, then stop the active DAS Server ’UDAS’ and/or remove the USB connection to the PC. If R214 up to R216 not assembled then the connector is not usable.
3.17.2 DAP
The board comes with a DAP connector (X402). For pinout of this connector see Figure 6-11. You can connect a DAP hardware here. If you use this connector make sure that the miniWiggler JDS is not activ (ACTIV LED is off) and a connected OCDS1 hardware is disconnected or tristated.
3.17.3 DAP_SCR
Additional DAP connector (X406) is connected to DAP_SC R. This DAP can be used as private DAP connection to the standby controller. For pinout of this connector see Figure 6-15. You can connect a DAP hardware here. This DAP use P33.6 and P33.7 which are connected to LED on the board. Maybe it is necessary to remove R393 and R394 if the speed of the connection is not fast enough.
3.17.4 High speed with DAP
For use the DAP connection with 160 MHz you need to remove 3 resistors to have a very short connection between device and connector. On the TC3X4L Triboard this 3 resistors are R214, R215 and R216 for DAP (red marked in Figure 3-7). This resistors needs to be removed. Important: When the resistors are removed then only the DAP connector on the board can be used. The on board wiggler and the OCDS1 connector couldn’t be use (are disconnected) in this case, also the DAP/JTAG part of the ETK connector couldn’t be used. All resistors are red marked in the following figure:
User Manual 3-10 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09 TriBoard Manual TC3X4L Hardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 TriBoard Information Figure 3-7 Location of DAP resistors on Top Side
3.17.5 ETK connector (optional)
The TriBoard provide a 10 pin samtec connector (X404) for connecting to an ETK. This connector should be assembled by your self if needed. For the pinout of connector see Figure 6-12. The needed Samtec connector is: TFM-105-02-A.
3.17.6 EmW Power (optional)
The TriBoard provide the 4 pin power connector (X502) for the Ethernet miniWiggler (EmW). This connector should be assembled by your self if needed. For the pinout of connector see Figure 6-13. The needed Samtec connector is the JST B4B-PH-K. The connector provide the input voltage to the Ethernet miniWiggler and an enable/wakeup signal connected to TLF35584 and a standby voltage of +1,25V connected to VDDSB of device. In case the EmW is used you must remove R522. If R522 is removed then you must make sure that the EmW is always connected. Otherwise with assembled R522 (default) you should not connect the pin 4 of connector. The mentioned resistor is red marked in Figure 3-8 U201 R395 X404 R212 S502 R222 CB205 R379 R372 C305 C310 X306 CB313 CB314 CB315 C311 U307 Y301 X604 R249 R246 R245 R244 X402 S201 R377 R204 R205 R215 R214 X201 X305 X304 X303 R240 R236 R234 R232 R230 R223 R361 R359 R211 D301 CB206 C303 U408U407 U406 R451 R455 R456 R454 R446 R444 CB419 CB418 CB417 CB416 CB415 CB414 D401 R430 R429 R423 CB405 C402 R411 BU401 L401 D402 R401 CB401 U404 U401 Y401 CB408 R403 R402 CB402 R344 R524 R424 R425 R426 R427R428 CB520 R201 CB204 R203 R202 C201 C202 R206 R207 Y201 R337R357 R324 R399 R391 R392 R393 R394 R396 R397 CB309 R532 C301C302 R439 R531 R335 R336 R355 R356 U305 T301T302 X301X302 X602X603 X601 D302 D303 D304 D305 D306 D307 D308 D309 D505 D506 D507D504 X401 X501 S501 R354 C519 R452 CB203 R213 R216 R398 U502 C505 D508 U501 L502 L501 CB501 C502 C507 C509 C508 C501 C503 C504 R501 R507 R508 R509 CB502 R231 R233 R235 R237 R241 R255 R256 R390 R375 R376 R348R349 R525 S202 X502 R346 R347 R457 X406 C522 CB316 CB317 U308 R248
User Manual 3-11 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09 TriBoard Manual TC3X4L Hardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 TriBoard Information Figure 3-8 Resistor for VDDSB X703 CB511 R388 R380 R378 Q301 R368 R371 R382 R419 R440 R369 R367 C320 C317 C316 C315 C314 C313 C312 Q403 R389 R383 R385 R370 CB 311 CB312 C208 C207 C205 C204 C203 R433 R523 R431 R381 R314 R252 R250 R251R253 R254 CB202 R208 R408 U306 R521 R238 R365 R364 R363 R362 R360 CB310 C304 R449 R448 R447 R445 R443 R413 U405 L402 CB413 C403 D403 R404 C401 R450 R442 R441 CB412 CB411 CB410 C405 C404 R422 R421U403 Q402 Q401 R412 C406 R420 R414 R418 R417 R416 R415 R410 R409 CB407 CB403 R407 U402 R406 R405 CB406 CB404 R305 R306 R308 R309 R315R316 R318 R319 R522 R301 R311 R341 R340 R321 R322 R220 R221 R533 R323 R343 CB301 CB302 CB512 CB513 CB515 CB516 CB517 CB518 CB519 R537 R307 R317 R538R534 R513 R535 R536 C515 R511 R512 R510 Q502 Q504 Q503 X702 X704X701 U301U302 R302 R342 CB303 CB304 CB305 CB306 CB307 CB308 R303 R304 R338 R330 R331 R358 R350 R351 U303U304 R332 R334 R333 R352 R353 R320 CB201 R209 CB510 R520 D503 R505 R504 C510 R502 R506 Q505 Q501 D501 C512 C511 D502 R503 R239 R312 R436 R437 R438 R313 R373 R374 Q506 L503 C520 C521 C506 CB506 U503 CB409R386 C306
User Manual 4-1 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09 TriBoard Manual TC3X4L Hardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 TriBoard Configuration
4 TriBoard Configuration
4.1 HW Boot Configuration
Figure 4-1 HW Configuration DIP-Switches The picture above shows the definition of the boot HW configuration switch. The meaning of the switches will be described in the following table (Table 4-1). Note: The ON position of the switch is equal to a logical LOW at the dedicated pin.
4.1.1 Default Pad State
P14.4 / HWCFG6 is used to select the Default Pad State. Dipswitch 1 used to select this. In case that dispswitch1 is set to ON then all I/O pins are in tristate otherwise the internal pull-up devices are enabled on the I/O pins. Please note that after change Dipswitch 1 you must make a power cycle (switch off -> switch on) to use the new configuration. In case that TriState is selected (Dipswitch 1 is set to ON) then the I/O pins are floating. If you need a specific level on different pins during startup (e.g. driver pins) then you must add the needed pull device (up or down). Some pins (especially the HWCFG pins) haven always the needed external pull-up and/or pull-down resistor assembled on the board.
4.1.2 Bootmode
Table 4-1 User Startup Modes 1)2)3) 1) The shadowed line indicates the default setting. 2) ’x’ represents the don’t care state. 3) 2 to 4 are the Dip Switch numbers. HWCFG[5...3] Type of Boot 2 3 4 XX1 Start-up mode is selected by Boot Mode Index X X OFF
110 Internal Start from Flash OFF OFF ON
100 Alternate Boot Mode, Generic Bootstrap Loader on fail (P14.0/P14.1) ON OFF ON 010 Alternate Boot Mode, ASC Bootstrap Loader on fail (P15.2/P15.3) OFF ON ON 000 Generic Bootstrap Loader (P14.0/P14.1) ON ON ON on 13 4 P14 P10.5 P10 P14
User Manual 4-2 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09 TriBoard Manual TC3X4L Hardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 TriBoard Configuration
4.2 Assembly Options
4.2.1 General optional resistors
Note: All resistors are red marked in the following figures Table 4-2 General optional resistors (default assembly in brackets) Component Description R202 Connect P20.2 (/TESTMODE) to GND (not assembled) R203 XTAL1 Rload (50 Ohm) (not assembled) R206 XTAL Rparallel (not assembled) R207 XTAL2 Rserial (assembled) R238 Switch off EVRC (not assembled) R240 Switch off EVR33 (not assembled) R390 Connect V_STBY to toggle LEDs D302...D305 (assembled) R399 Connect V_UC to toggle LEDs D306...D309 (assembled) R423 Connect P20.0 with miniWiggler JDS (not assembled) R424 Connect P20.0 with OCDS1 connector (not assembled) R425 Connect P21.7 with OCDS1 connector (not assembled) R426 Connect P20.2 with OCDS1 connector (not assembled) R427 Connect P21.7 with USR1 of miniWiggler JDS (not assembled) R428 Connect P20.2 with USR1 of miniWiggler JDS (not assembled) R429 Connect P21.6 (DAP3) with USR1 of DAP (assembled) R430 Connect P20.2 with USR1 of DAP (not assembled) R433 Connect P21.7 with ETK connector (not assembled) R439 Connect P21.7 with ETK connector (not assembled) R508 Connect pin MPS of TLF35584 to V_CO (not assembled) R509 Connect pin MPS of TLF3 5584 to Ground (assembled) R524 Connect VDDP3 to V_UC (not assembled) R525 Connect VDDP3 to +3V3 (not assembled)
User Manual 4-4 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09 TriBoard Manual TC3X4L Hardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 TriBoard Configuration
4.2.2 Resistors for peripherals
Table 4-3 Resistors for peripherals (default assembly in brackets) Component Description R220 Connect V_VR with VDDM (assembled) R221 Connect +3V3 with VDDM (not assembled) R222 Connect VAREF1 with VDDM (assembled) R223 Connect VAREF2/AN43 with VDDM (assembled) R301 Connect P20.7 with RXD of CAN0 transceiver (assembled) R302 Connect P20.8 with TXD of CAN0 transceiver (assembled) R303 Connect P14.1 with RXD of CAN0 transceiver (not assembled) R304 Connect P14.0 with TXD of CAN0 transceiver (not assembled) R311 Connect P13.1 with RXD of CAN1 transceiver (assembled) R312 Connect P13.0 with TXD of CAN1 transceiver (assembled) R313 Connect P00.1 with RXD of CAN1 transceiver (not assembled) R314 Connect P00.0 with TXD of CAN1 transceiver (not assembled) R320 Connect P02.0 with TXD of ERAY-A transceiver (assembled) R321 Connect P02.4 with TXDEN of ERAY-A transceiver (assembled) R322 Connect P02.1 with RXD of ERAY-A transceiver (assembled) R323 Connect P10.1 with EN of ERAY-A transceiver (assembled) R324 Connect P10.2 with ERRN of ERAY-A transceiver (assembled) R340 Connect P02.2 with TXD of ERAY-B transceiver (assembled) R341 Connect P02.5 with TXDEN of ERAY-B transceiver (assembled) R342 Connect P02.3 with RXD of ERAY-B transceiver (assembled) R343 Connect P20.10 with EN of ERAY-B transceiver (assembled) R344 Connect P20.9 with ERRN of ERAY-B transceiver (assembled) R348 Connect P15.4 with SCL of I2C Eeprom (assembled) R349 Connect P15.5 with SDA of I2C Eeprom (assembled) R364 Connect P15.1 with RXD of LIN1 transceiver (assembled) R365 Connect P15.0 with TXD of LIN1 transceiver (assembled) R368 Connect P11.9 with RXD1 of Ethernet PHY (assembled) R369 Connect P11.10 with RXD0 of Ethernet PHY (assembled) R370 Connect P11.11 with CRS_V of Ethernet PHY (assembled) R371 Connect P11.12 with RXC and TXC of Ethernet PHY (assembled) R372 Connect P11.6 with TXEN of Ethernet PHY (assembled) R373 Connect P11.3 with TXD0 of Ethernet PHY (assembled) R374 Connect P11.2 with TXD1 of Ethernet PHY (assembled) R376 Disable outputs of MDIO/MDC transceiver (not assembled) R377 Connect P10.3 with MDINT of Ethernet PHY (not assembled) R436 Connect P14.0 with RXD of USB to UART (assembled)
User Manual 4-5 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09 TriBoard Manual TC3X4L Hardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 TriBoard Configuration Note: All resistors are red marked in the following figures Figure 4-4 Location of peripheral resistors on Top Side R437 Connect P14.1 with TXD of USB to UART (assembled) R438 Connect P15.2 with RXD of USB to UART (not assembled) R440 Connect P15.3 with TXD of USB to UART (not assembled) Table 4-3 Resistors for peripherals (default assembly in brackets) (continued) Component Description U201 R395 X404 R212 S502 R222 CB205 R379 R372 C305 C310 X306 CB313 CB314 CB315 C311 U307 Y301 X604 R249 R246 R245 R244 X402 S201 R377 R204 R205 R215 R214 X201 X305 X304 X303 R240 R236 R234 R232 R230 R223 R361 R359 R211 D301 CB206 C303 U408U407 U406 R451 R455 R456 R454 R446 R444 CB419 CB418 CB417 CB416 CB415 CB414 D401 R430 R429 R423 CB405 C402 R411 BU401 L401 D402 R401 CB401 U404 U401 Y401 CB408 R403 R402 CB402 R344 R524 R424 R425 R426 R427R428 CB520 R201 CB204 R203 R202 C201 C202 R206 R207 Y201 R337R357 R324 R399 R391 R392 R393 R394 R396 R397 CB309 R532 C301C302 R439 R531 R335 R336 R355 R356 U305 T301T302 X301X302 X602X603 X601 D302 D303 D304 D305 D306 D307 D308 D309 D505 D506 D507D504 X401 X501 S501 R354 C519 R452 CB203 R213 R216 R398 U502 C505 D508 U501 L502 L501 CB501 C502 C507 C509 C508 C501 C503 C504 R501 R507 R508 R509 CB502 R231 R233 R235 R237 R241 R255 R256 R390 R375 R376 R348R349 R525 S202 X502 R346 R347 R457 X406 C522 CB316 CB317 U308 R248
User Manual 4-6 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09 TriBoard Manual TC3X4L Hardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 TriBoard Configuration Figure 4-5 Location of peripheral resistors on Bottom Side X703 CB511 R388 R380 R378 Q301 R368 R371 R382 R419 R440 R369 R367 C320 C317 C316 C315 C314 C313 C312 Q403 R389 R383 R385 R370 CB 311 CB312 C208 C207 C205 C204 C203 R433 R523 R431 R381 R314 R252 R250 R251R253 R254 CB202 R208 R408 U306 R521 R238 R365 R364 R363 R362 R360 CB310 C304 R449 R448 R447 R445 R443 R413 U405 L402 CB413 C403 D403 R404 C401 R450 R442 R441 CB412 CB411 CB410 C405 C404 R422 R421U403 Q402 Q401 R412 C406 R420 R414 R418 R417 R416 R415 R410 R409 CB407 CB403 R407 U402 R406 R405 CB406 CB404 R305 R306 R308 R309 R315R316 R318 R319 R522 R301 R311 R341 R340 R321 R322 R220 R221 R533 R323 R343 CB301 CB302 CB512 CB513 CB515 CB516 CB517 CB518 CB519 R537 R307 R317 R538R534 R513 R535 R536 C515 R511 R512 R510 Q502 Q504 Q503 X702 X704X701 U301U302 R302 R342 CB303 CB304 CB305 CB306 CB307 CB308 R303 R304 R338 R330 R331 R358 R350 R351 U303U304 R332 R334 R333 R352 R353 R320 CB201 R209 CB510 R520 D503 R505 R504 C510 R502 R506 Q505 Q501 D501 C512 C511 D502 R503 R239 R312 R436 R437 R438 R313 R373 R374 Q506 L503 C520 C521 C506 CB506 U503 CB409R386 C306
User Manual 5-1 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09 TriBoard Manual TC3X4L Hardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 Signal (on board used) Description
5 Signal (on board used) Description
For more information about the signals please see the user manual/datasheet for TC3X4 and/or the schematics of the board. All not mentioned signals are not used on the board and can be used outside. Optional marked signals are used only if they are connected (default is that they are not used on the board).
5.1 Power Signals
5.2 Reset Signals
VCC_IN Supply Input (3,5V...40V) VIN Input Voltage of Power Supply Device GND Ground V_PREPEG Pre Regulator Voltage (~5,8V) V_UC Microcontroller Supply Voltage (5V or 3,3V depends on assembled TLF35584) V_CO Communication Supply Voltage (5V) V_VR Reference Supply Voltage (5V) V_STBY Standby Supply Voltage (5V or 3,3V depends on assembled TLF35584) VDD Core Supply Voltage (1,25V) VDDSB Emulation Stand-by SRAM Supply Voltage (1,25V) VDDP3 Flash Power Supply Voltage (3,3V) VFLEX Flexport Supply Voltage (3,3V) VEXTOSC Oscillator Port Supply Voltage (5V or 3,3V depends on assembled TLF35584) VDDOSC Oscillator Core Supply Voltage (1,25V) VSSOSC Oscillator Ground VDDM ADC Analog Part Supply Voltage (5V or 3,3V selectable via 0R resistors) VAREF1 ADC Reference Voltage 1 (VDDM) VAREF2 ADC Reference Voltage 2 (VDDM) VDD_USB Supply Voltage from USB (5V) VDD_FT Supply Voltage FT2232HL device (3,3V) Table 5-2 Reset Signals Short name Description /PORST Power On Reset /DBG_PORST Power On Reset from debug connectors /ESR0 External Service Request 0 (Hardware Reset) /ESR1 External Service Request 1 (Non Maskable Interrupt)
User Manual 5-2 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09 TriBoard Manual TC3X4L Hardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 Signal (on board used) Description
5.3 Config Signals
5.4 Clock Signals
5.5 Debug Signals
5.6 Peripheral Signals
P14.5 HWCFG1 (EVR33OFF / EVR33ON) P14.2 HWCFG2 (EVRCOFF / EVRCON) P14.4 HWCFG6 (Pins in tristate / Pins with pull-up) P14.3 HWCFG3 (Boot from pins / Boot from Flash BMI) P10.5 HWCFG4 (see boot configuration Table 4-1) P10.6 HWCFG5 (see boot configuration Table 4-1) Table 5-4 Clock Signals Short name Description XTAL1 Crystal Oscillator Input XTAL2 Crystal Oscillator Output Table 5-5 Debug Signals Short name Description /TRST Test Reset DAP0 Device Access Port Line 0 / Test Data Clock (TCK) DAP1 Device Access Port Line 1 / Test Data Select (TMS) DAP2 Device Access Port Line 2 / Test Data Output (TDO) P21.6 Test Data Input (TDI) DAP0_A DAP0 / TCK from debug connectors DAP1_A DAP1 / TMS from debug connectors P21.7 DAP2 / TDO from debug connectors / TriCore Breakpoint Input P20.2 Test Mode Select Input P20.0 TriCore Breakpoint Output Table 5-6 Peripheral Signals Short name Description P14.1 ASCLIN0 Receive Input A CAN01 Receive Input B (optional) P14.0 ASCLIN0 Transmit Output CAN01 Transmit Output (optional) P15.3 ASCLIN0 Receive Input B (optional)
User Manual 5-3 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09 TriBoard Manual TC3X4L Hardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 Signal (on board used) Description P15.1 ASCLIN1 Receive Input A P15.0 ASCLIN1 Transmit Output P15.4 I2C0 Serial Clock P15.5 I2C0 Serial Data Input C und Output P20.7 CAN00 Receive Input B P20.8 CAN00 Transmit Output P13.1 CAN10 Receive Input D P13.0 CAN10 Transmit Output P00.1 CAN10 Receive Input A (optional) P00.0 CAN10 Transmit Output (optional) P02.0 E-Ray Channel A Transmit Data Output P02.4 E-Ray Channel A Transmit Data Output enable P02.1 E-Ray Channel A Receive Data Input 2 P10.1 E-Ray Channel A Enable Output P10.2 E-Ray Channel A Error Input P02.2 E-Ray Channel B Transmit Data Output P02.5 E-Ray Channel B Transmit Data Output enable P02.3 E-Ray Channel B Receive Data Input 2 P20.10 E-Ray Channel B Enable Output P20.9 E-Ray Channel B Error Input P11.2 Ethernet TXD1 Output P11.3 Ethernet TXD0 Output P11.6 Ethernet TXEN Output P11.9 Ethernet RXD1 Input A P11.10 Ethernet RXD0 Input A P11.11 Ethernet CRSDV Input A P11.12 Ethernet REFCLK Input A P02.8 Ethernet Management Data Clock Output (MDC) P00.0 Ethernet Management Data Input/Output (MDIO) P10.3 Ethernet MD Interrupt Input (optional) P14.6 QSPI2 Slave Select Output 2 for SCS of TLF35584 P15.8 QSPI2 Master Clock Output for SCL of TLF35584 P15.6 QSPI2 Master Transmit Output for SDI of TLF35584 P15.2 QSPI2 Master Receive Input E for SDO from TLF35584 ASCLIN0 Transmit Output (optional) P02.7 Output for Watchdog Input of TLF35584 P33.8 SMU_FSP0 Output for Error Signal Input of TLF35584 P33.9 Input for Safe State Signal 1 from TLF35584 Table 5-6 Peripheral Signals (continued) Short name Description
User Manual 5-4 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09 TriBoard Manual TC3X4L Hardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 Signal (on board used) Description P33.10 Output for Wake/Inhibit Input of TLF35584 P20.0 HSCT System Clock P21.2 HSCT Data Negative Input P21.3 HSCT Data Positive Input P21.4 HSCT Data Negative Output P21.5 HSCT Data Positive Output P20[11...14] On board LED’s P33[4...7] On board LED’s (standby voltage supplied) Table 5-6 Peripheral Signals (continued) Short name Description
User Manual 6-1 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09 TriBoard Manual TC3X4L Hardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 Connector Pin Assignment
6 Connector Pin Assignment
The TriBoard will be shipped with four male (plug) co nnectors on top layer and four female (socket) connectors on bottom layer. The default connectors are 80-pol. Board to Board connectors from Samtec: http://www.samtec.com Plug: FTSH-140-02-L-DV-ES-A Socket: FLE-140-01-G-DV-A
6.1 On Board only used signals
Following port pins are only used on board and are not connected to any connector also not via resistor: Table 6-1 On Board only used Signals Short name Description P32.0 Used as VGATE1N for EVRC P32.1 Used as VGATE1P for EVRC P14.2 Used as HWCFG2 P14.4 Used as HWCFG6 P14.5 Used as HWCFG1
User Manual 6-2 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09 TriBoard Manual TC3X4L Hardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 Connector Pin Assignment
6.2 TC3X4 Connector / Top View
Figure 6-1 Connector for TC3X4 - Pinout (Part I, Top View) GND 12 GND GND 12 GND GND 34 GND GND 34 GND 56 P21.6 VCC_IN 56 VCC_IN 78 P21.7 VCC_IN 78 VCC_IN 91 0 91 0 11 12 11 12 13 14 13 14 15 16 /ESR 1 15 16 /ESR0 17 18 17 18 19 20 GND 19 20 GND 21 22 21 22 /POR ST 23 24 P10.5 23 24 25 26 25 26 27 28 P10.2 27 28 P23.1 29 30 P13.1 29 30 P22.1 31 32 P13.0 31 32 P22.0 33 34 P13.3 33 34 P22.3 35 36 P13.2 35 36 P22.2 37 38 P20.9 37 38 P20.10 39 40 P20.13 39 40 P00.4 41 42 P33.5 41 42 P20.6 43 44 P20.3 43 44 P20.2 45 46 P00.0 45 46 P00.3 47 48 P00.1 47 48 P00.2 49 50 P21.2 GND 49 50 GND 51 52 P21.3 XTAL1 51 52 P32.4 53 54 P21.4 XTAL2 53 54 55 56 P21.5 P15.3 55 56 P15.5 57 58 P15.2 57 58 P15.4 59 60 P14.1 59 60 P15.1 61 62 P14.0 61 62 P15.0 63 64 P20.11 63 64 P00.12 65 66 P20.14 65 66 67 68 P20.12 67 68 P00.5 69 70 P20.7 69 70 P20.8 71 72 P20.0 P15.8 71 72 73 74 73 74 P10.3 75 76 VDDSB 75 76 GND 77 78 VEXT 77 78 +3V3 79 80 VEXT 79 80 +3V3 BUS EXPANSION (X601,X701) PERIPHERALS (X602,X702)
User Manual 6-3 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09 TriBoard Manual TC3X4L Hardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 Connector Pin Assignment Figure 6-2 Connector for TC3X4 - Pinout (Part II, Top View) GND 12 GND GND 12 GND GND 34 GND GND 34 GND AN0 56 AN16 P00.9 56 AN1 78 AN17 78 AN2 91 0 P02.0 91 0 AN3 11 12 P02.1 11 12 AN4 13 14 AN20 P02.2 13 14 AN5 15 16 AN21 P02.3 15 16 P14.6 AN6 17 18 P02.4 17 18 AN7 19 20 P02.5 19 20 AN8 21 22 AN24 21 22 23 24 AN25 23 24 AN10 25 26 25 26 P15.6 AN11 27 28 27 28 P15.7 AN12 29 30 29 30 AN13 31 32 31 32 33 34 P10.1 33 34 35 36 P10.6 35 36 GND 37 38 GND 37 38 VDDM 39 40 VAREF1 39 40 GND 41 42 VAREF2 / AN43 41 42 GND 43 44 GND 43 44 45 46 P11.2 45 46 47 48 P11.3 47 48 49 50 49 50 AN35 51 52 51 52 AN36 53 54 AN44 P11.6 53 54 AN37 55 56 AN45 55 56 P33.8 AN38 57 58 AN46 57 58 P33.9 AN39 59 60 AN47 P11.9 59 60 P33.10 GND 61 62 GND P11.10 61 62 P33.13 63 64 P33.6 P11.11 63 64 65 66 P11.12 65 66 67 68 P33.4 67 68 VEXT 69 70 +3V3 69 70 P02.6 71 72 P00.6 71 72 P02.7 73 74 P00.7 73 74 P02.8 75 76 P00.8 VFLEX 75 76 P33.7 77 78 P14.3 VEXT 77 78 +3V3 P33.11 79 80 P33.12 VEXT 79 80 +3V3 ADC (X603, X703) GTM / PORTS (X604,X704)
User Manual 6-4 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09 TriBoard Manual TC3X4L Hardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 Connector Pin Assignment
6.3 Power connector pinout
Figure 6-3 Power connector pinout (Roka 520 2550
6.4 USB connector pinout
Figure 6-4 USB connector pinout (Micro USB B-type)
6.5 FlexRay™ (ERAY) connector pinout
Figure 6-5 FlexRay™ (ERAY) connector pinout (IDC10)
6.6 CAN connector pinout
Figure 6-6 CAN connector pinout (IDC10) +3,5V...40V GND VCC GND ID 2 468 GND BP BM 13579 2 468 GND CANH CANL 13579 GND
User Manual 6-5 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09 TriBoard Manual TC3X4L Hardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 Connector Pin Assignment
6.7 LIN connector pinout
Figure 6-7 LIN connector pinout (IDC10)
6.8 HSCT connector pinout
Figure 6-8 HSCT connector pinout (IEE1394 6-conductor)
6.9 Ethernet connector pinout
Figure 6-9 Ethernet connector pinout (RJ45) 2 468 GND BUS VIN opt 13579 GND TXD_P RXD_P GND GND TXD_N RXD_N SYSCLKJ2
User Manual 6-6 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09 TriBoard Manual TC3X4L Hardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 Connector Pin Assignment
6.10 OCDS1 connector pinout
Figure 6-10 OCDS1 connector pinout (IDC16)
6.11 DAP connector pinout
Figure 6-11 DAP connector pinout (Samtec FTSH10) TDO 2 468 13579 10 12 14 16 11 13 15 TDI /TRST TCK /BRKIN TMS GND GND /PORST /BRKOUT GND V_UC DAP0 2 468 13579 USR1_IO /PORST USR0_IO DAP1 GND GND Key GND V_UC
User Manual 6-7 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09 TriBoard Manual TC3X4L Hardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 Connector Pin Assignment
6.12 ETK connector pinout
Figure 6-12 ETK connector pinout (Samtec TFM-105)
6.13 Ethernet miniWiggler power connector pinout
Figure 6-13 Ethernet miniWiggler connector pinout (JST B4B-PH) TDO / DAP2 2 468 13579 V_UC /PORST TDI TCK / DAP0 /TRST TMS / DAP1 BRKIO /ESR0 GND 2 41 3 WAKEUP VDDSB VCC_IN GND
User Manual 7-1 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09 TriBoard Manual TC3X4L Hardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 Schematic and Layout
7 Schematic and Layout
7.1 Known problems
7.1.1 Known problems on TriBoard TC3X4L TH V1.0 No problems known. 7.1.2 Known problems on TriBoard TC3X4L V1.0 No problems known.
7.2 Schematic
User Manual 7-2 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09 TriBoard Manual TC3X4L Hardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 Schematic and Layout Figure 7-1 Schematic - Project D D C C B B A A
1 Infineon Technologies AG
Tel.: +49-89-234-0 15.10.2018 Number: Date: Sheet: of TriBoard TC3X4L Project 1.0Revision: G:\\Technical_Support\\TriCore\\TriBoard\\EDA_DXP\\TriBoard AURIX 2G\\TriBoard TC3X4L\\TriBoard TC3X4L V1.X\\TriBoar d_TC3X4L_V10.prjFile: XTAL[1..2] DEBUG.. PORT[00..33] AN[0..47] Clock, Config, Debug, Ports and ADC Clk_Cfg_Dbg_Ports_Adc.sch PORT[00..33]/ESR0 On Board Peripherals Peripherals.sch DEBUG.. PORT[00..33]/ESR0 /PORST miniWiggler and Debug Connectors wiggler_Dbg_con.sch /PORST /ESR0 /ESR1 PORT[00..33] Power Supply Supply.sch XTAL[1..2] PORT[00..33] AN[0..47] /PORST /ESR0 /ESR1 NC1[5..80] NC2[5..80] NC4[5..80] NC3[5..80] Connector Plug Connectm.sch XTAL[1..2] PORT[00..33] AN[0..47] /PORST /ESR0 /ESR1 NC1[5..80] NC2[5..80] NC4[5..80] NC3[5..80] Connector Socket Connectf.sch NC4[5..80] NC3[5..80] NC2[5..80] PORT[00..33] AN[0..47] XTAL[1..2] /ESR0 /PORST /ESR1 DEBUG.. NC1[5..80]
User Manual 7-3 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09 TriBoard Manual TC3X4L Hardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 Schematic and Layout Figure 7-2 Schematic - Clock, Config, Debug, Ports and ADC D D C C B B A A
2 Infineon Technologies AG
Tel.: +49-89-234-0 15.10.2018 Number: Date: Sheet: of TriBoard TC3X4L Clock, Config, Debug, Ports, ADC 1.0Revision: G:\\Technical_Support\\TriCore\\TriBoard\\EDA_DXP\\TriBoard AURIX 2G\\TriBoard TC3X4L\\TriBoard TC3X4L V1.X\\Clk_Cf g_Dbg_Ports_Adc.schFile: P21.6 PORT[00..33] CLOCK & TESTMODE JTAG / DAP / OCDS1 XTAL181 XTAL282 VSS(OSC) 80 P20.2 / TESTMODE94 VEXT(OSC) 83 VDD(OSC) 79 TRST91 TCK / DAP092 P21.6 / TDI88 TMS / DAP189 P21.7 / TDO / DAP2 90 U201B TC3X4_LQFP P15.5 / SDA0114 P20.10 104 P20.14108 P11.6 / TXEN 134 P11.9 / RXD1A135 P11.3 / TXD0 133 P14.1 / ARX0A119 P14.0 / ATX0 118 P15.1 / ARX1A110 P15.0 / ATX1 109 P20.11105 P20.12106 P20.13107 P20.8 / CAN00_TXD 102 P20.9 / REQ7_0 103 VFLEX 136 P11.12 / REFCLKA139 P11.10 / RXD0A137 P11.2 / TXD1 132 P15.4 / SCL 113 P33.5 61 P20.7 / CAN00_RXDB101 P11.11 / RXDVA138 ON BOARD USED PERIPHERALS / PINS P15.6 / MTSR2 115 P33.7 63 P33.4 60 P33.6 62 ASCLIN CAN QSPI / TLF35584 ERAY I2C LEDs P14.4 / HWCFG6122 P14.2 / HWCFG2120 P33.8 / SMU_FSP0 64P33.965 P21.3 / RXD0P 85P21.4 / TXD0N 86P21.5 / TXD0P 87 P14.3 / HWCFG3121 P10.5 / HWCFG4143 P10.6 / HWCFG5144 P20.0 / SYSCLK 93P21.2 / RXD0N 84 HSCTHWCFG P33.10 66 P33.1167 ETHERNET BUTTON P02.0 / TXD0A1 P02.1 / RXD0A2 P02.2 / TXD0B 3 P02.3 / RXD0B 4 P02.4 / TXEN0A5 P02.5 / TXEN0B 6 P13.1 / CAN10_RXDD129 P13.0 / CAN10_TXD 128 P15.8 / SCLK2 117 P14.5 / HWCFG1123 P10.2 / REQ2_0141 P10.1140 P14.6 / SLSO22124 P15.2 / MRST2E111 P10.3 / REQ3_0142 P00.0 / MDIOA 11P02.8 / MDC 9 P02.7 8 U201C TC3X4_LQFP PORT[00..33] P20.2 P21.7 GND R206 opt XTAL[1..2] XTAL1 XTAL2 R203 50R_optVSSOSC DEBUG.. R207 C202 10pF C201 10pFVSSOSC VSSOSC 1 2 Y201 20MHz R201 10K V_UC P20.2R202 optGND XTAL[1..2] R204 R205 R216 DAP2 R209 0RCB201 330nR208 0RCB202 330n VDD VSSOSC V_UC VSSOSC VDDOSC VEXTOSCAN[0..47] V_VR CB204 470n GND VDDM +3V3 FOR 5V ADC FOR 3,3V ADC AN0 / EDS3PA57 AN1 / EDS3NA56 AN2 / EDS0PA55 AN3 / EDS0NA54 EVADC / EDSADC AN453 AN552 AN651 AN3534 AN750 AN849 AN1048 AN1147 AN12 / EDS0PB46 AN13 / EDS0NB45 AN1640 AN17 / P40.1039 AN20 / EDS2PA38 AN21 / EDS2NA37 AN24 / EDS2PB / P40.036 AN25 / EDS2NB / P40.135 AN44 / EDS1PC29 AN45 / EDS1NC28 AN46 / EDS1PD27 AN47 / EDS1ND26 VAGND1 41 VAREF1 42 VDDM 44 VSSM 43 AN36 / EDS1PA / P40.633 AN37 / EDS1NA / P40.732 AN38 / EDS1PB / P40.831 AN39 / EDS1NB / P40.930 VAGND2 / AN42 25 VAREF2 / AN43 24 U201E TC3X4_LQFP R222 6R8CB205 2,2μF GND VAREF1 VDDM R223 6R8CB206 2,2μF GND VAREF2 VDDM R220 1R2 R221 1R2_opt PORTS P13.3131 P13.2130 P32.4 72 P00.1221 P00.920 P00.415 P00.516 P00.314 P00.213 P00.112 P20.3 95 P20.6 100 P00.819 P00.718 P00.617 P02.67 P33.12 68 P33.13 69 P22.3 77P22.2 76 P15.3112 P22.0 74 P22.1 75 P15.7 116 P23.1 73 U201D TC3X4_LQFP P00.1 P00.2 P00.3 P00.4 P00.5 P00.6 P00.7 P00.8 P00.9 P00.12 GND Switch ON means the corresponding signal is low. Switch OFF means the corresponding signal is high. R230 1K5 R232 1K5 R234 1K5 R236 1K5 R240 1K5_opt R238 1K5_opt P14.5 P14.2 P14.4 P10.5 P10.6 P14.3HWCFG3 HWCFG4 HWCFG5 HWCFG6 (about configuration see the manual of assembled device) GND 1S201 DIPSW-4 R231 47K R233 47K R235 47K R237 47K R239 47K R241 47K V_UC V_UC V_UC V_UC V_UC V_UC NOTE: S201 is for device configuration S202 P33.11 R256 1K5 R255 47K V_STBY GND DAP2 /TRST DAP0 DAP1 DEBUG.. R212 33R R214 R215 DAP0 DAP0_A DAP1 DAP1_A R213 33R P13.1 P15.1 P14.1 P14.6 P10.2 P13.0 P15.4 P14.0 P15.0 P02.7 P02.2 P20.9 P20.10 SYSCLK P33.8 P02.3 P20.7 P20.8 P15.2 P15.5 P02.5 P33.10 VFLEX R211 +3V3 CB203 100n P02.1 P10.1 RXD0_P RXD0_N P15.8 TXD0_P TXD0_N P15.6 P33.9 P02.4 P02.0 SYSCLK1 TXDP3 GND2 TXDN4 S RXDP5 RXDN6 X201 HSCT0-opt GND R254 R253 R250 R251 R252 P21.2 P21.5 P21.4 P20.0 P21.3 P33.11 C207 47nF GND AN44 C208 47nFGND AN45 GND AN7 C203 47nF C204 47nF GND AN20 C205 47nF GND AN21 R249 4K7 R248 4K7 R244 4K7 R245 4K7 R246 4K7 GND P33.6 P33.4 P33.5 P33.7 P11.3 P11.2 P11.6 P02.6 P23.1 P15.3 AN[0..47] AN0 AN1 AN2 AN3 AN4 AN5 AN6 AN8 AN7_I AN10 AN11 AN12 AN13 AN16 AN17 AN20_I AN21_I AN24 AN25 AN46 AN47 AN44_I AN45_I AN35 AN36 AN37 AN38 AN39 P10.5 P10.6 P14.4 P14.3 P33.11 P20.12 P20.14 P20.11 P20.13 P11.12 P11.10 P11.9 P11.11 P14.2 P14.5 P02.8 P00.0 P10.3 P33.12 P33.13 P32.4 P15.7 P20.3 P20.6 P22.0 P22.1 P22.3 P22.2 P13.2 P13.3
User Manual 7-4 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09 TriBoard Manual TC3X4L Hardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 Schematic and Layout Figure 7-3 Schematic - On Board Peripherals D D C C B B A A
3 Infineon Technologies AG
Tel.: +49-89-234-0 15.10.2018 Number: Date: Sheet: of TriBoard TC3X4L On Board Peripherals 1.0Revision: G:\\Technical_Support\\TriCore\\TriBoard\\EDA_DXP\\TriBoard AURIX 2G\\TriBoard TC3X4L\\TriBoard TC3X4L V1.X\\Peripherals.schFile: V_CO R305 GND R307 120R R308 R309 0RGND2 RXD4 CANH 7 TXD1 VCC3 CANL 6 STB 8 VIO 5 U301 TLE9251VSJ R306 V_UC V_CO R315 GND R317 120R R318 R319 0RGND2 RXD4 CANH 7 TXD1 VCC3 CANL 6 STB 8 VIO 5 U302 TLE9251VSJ R316 V_UC R301 P00.0 P00.1 X301 CAN0 X302 CAN1 GND GND PORT[00..33] CB303 100n CB304 100n CB305 100n GND GND GND VIN V_CO V_UC BPA BMA CB306 100n CB307 100n CB308 100n GND GND GND VIN V_CO V_UC BPB BMB ERRNA ERRNB R350 4K7R351 4K7 V_UC R330 4K7 R331 4K7 V_UC GND GND 1 2 T301 B82789-C0104 C301 10nF GND R337 R335 51R R336 51R C302 10nF GND R357 R355 51R R356 51R R333 opt R338 4K7 V_UC R358 4K7 V_UC ENA ENB TXDA TXENA RXDA TXDB TXENB RXDB BGEA BGEB R334 opt R332 opt GND R353 opt R354 opt R352 opt GND R323 R343 CB301 100n GND CB302 100n GND V_UC GND CB309 100n P15.4 P15.5 R342 R341 R340 R344 R324 R321 P20.9 R320 P10.2 R322 PORT[00..33] SDA 3 VCC4 SCL 1 VSS2 U305 24AA02E48-E/OT P10.1 P20.10 P02.4 P02.5 P02.1 P02.0 P02.3 P02.2 X303 ERAY-A X304 ERAY-B GND R362 R360 CB310 100n GND C303 22μF/50VGND P15.0 P15.1 R365 R364 R363 10K V_UC D301 BAT54-04 X305 LIN1 R361 10K VIN R359 0R_opt GND GND V_UC VIN VIN EN 2 INH8 BUS6 TXD 4 WK 3 RXD 1 VS7 GND 5 U306 TLE7259-3GE C304 GND P20.7 P20.8 1 2 T302 B82789-C0104 TXD4 BGE7 TXDEN5 RXD6 EN2 STBN8 RXEN9 ERRN10 GND 13 INH 1 WAKE 12 BP 15 BM 14 VBAT 11 VDD 16 VIO 3 U303 TLE9221SX GND INHA GND GND TXD4 BGE7 TXDEN5 RXD6 EN2 STBN8 RXEN9 ERRN10 GND 13 INH 1 WAKE 12 BP 15 BM 14 VBAT 11 VDD 16 VIO 3 U304 TLE9221SX GND INHB GND GND R311 0RR312 P13.1 P13.0 R313 0R_optR314 0R_opt R302 R303 0R_opt R304 0R_opt P14.0 P14.1 V_UC R398 470R D309 LB T673 D308 LB T673 P33.4 R390 R397 470R P33.5 R396 470R P33.6 R395 470R P33.7 R394 470R P20.11 R393 470R P20.12 R392 470R P20.13 R391 470R P20.14 D307 LB T673 D306 LB T673 D305 LB T673 D304 LB T673 D303 LB T673 D302 LB T673V_STBY R399 R348 R349 R346 R347 V_UC V_UC TD+ 1 CT 4 RD+ 3 TD- 2 CT 5 RD- 6 GND 8 LK 10LA 9 RA 12RK 11 SHIELD S X306 RJ45 /ESR0 C310 27pF C311 27pF GND GND 1 3 Y301 NX3225SA-25MHz +3V3 RSTN 6 1 Q301A BSD235N 3 4 Q301B BSD235N GND GND R381 10K R380 10K R375 10K R376 opt P02.8 P00.0 R382 2K49/1% GNDGND C305 22μF GND CB311 100n GND +3V3 LED0 / PHYAD[0] / PMEB24 LED1 / PHYAD[1]25 CKXTAL1 31 CKXTAL2 32 EPAD HS MDI-[0]4 MDI+[0]3 MDIO23 MDC22 TXC15 PHYRSTB 21 RSET 1 RTL8201FI TXD[0]16 TXD[1]17 TXD[2]18 TXD[3]19 RXD[0]9 RXD[1]10 RXD[2] / INTB11 RXD[3] / CLK_CTL12 TXEN20 RXC13 MDI-[1]6 MDI+[1]5 AVDD10OUT2 AVDD337 DVDD10OUT29 DVDD3314 AVDD3330 COL27 CRS / CRS_DV26 RXDV8 RXER / FXEN28 U307 RTL8201FI-VC-CG GND R388 510R C317 10n Shield GND GND +3V3 GND C313 100n C314 10n C315 10n C316 100n C312 1000pF/2KV +3V3 R385 4K7 R389 510R R383 4K7 /ESR0 CB312 100n CB313 100n CB314 100n R378 4K7 R377 330R_opt P10.3 +3V3 R379 1K8 +3V3 C320 opt P11.2 P11.3 R386 4K7 CB315 100n GND MDI0_P MDI0_N MDI1_P MDI1_N P11.6 R374 R373 R372 R371 GND R370 R369 R368 P11.11 P11.10 P11.9 P11.12 R367 4K7 +3V3 OE6 VCCA3 VCCB 7 A15 GND 2B1 8A24 B2 1 U308 TXS0102DCUT GND +3V3 CB316 100n CB317 100n V_UC GND+3V3 GND Shield C306 10n GND
User Manual 7-5 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09 TriBoard Manual TC3X4L Hardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 Schematic and Layout Figure 7-4 Schematic - miniWiggler JDS and Debug connectors D D C C B B A A
4 Infineon Technologies AG
Tel.: +49-89-234-0 15.10.2018 Number: Date: Sheet: of TriBoard TC3X4L miniWiggler and Debug connectors 1.0Revision: G:\\Technical_Support\\TriCore\\TriBoard\\EDA_DXP\\TriBoard AURIX 2G\\TriBoard TC3X4L\\TriBoard TC3X4L V1.X\\Wiggler_Dbg_con.schFile: TMS 1 TDO 3 CPUCLOCK 5 TDI 7 TRST 9 TCK 11 BRKIN 13 N.C. 15 VCC2 GND4 GND6 PORST8 BRKOUT10 GND12 OCDSE14 KEY16 X401 OCDS1 V_UC GND DAP0_A DAP1_A /BRKOUT /TRST GND /DBG_PORST R424 0R_opt R426 0R_opt R425 0R_opt VREF 1 GND 3 GND 5 KEY 7 GND 9 DAP12 DAP04 USER18 USER06 RESET10 X402 DAP DEBUG.. /BRKIN R428 0R_opt R427 0R_opt P20.0 PORT[00..33] /PORST PORT[00..33] DEBUG.. EECS63 EECLK62 EEDATA61 TEST13 SUSPEND36 OSCI2 DM7 GND1 VREGOUT49 RESET14 AGND10 OSCO3 DP8 REF6 GND5 VREGIN50 GND 11 VCCIO20 GND 15 VCCIO31 ADBUS0 16 ADBUS1 17 ADBUS2 18 ADBUS3 19 ADBUS4 21 ADBUS5 22 ADBUS6 23 ADBUS7 24 ACBUS0 26 ACBUS1 27 ACBUS2 28 BDBUS0 38 BCBUS0 48 BDBUS1 39 BCBUS1 52 BDBUS2 40 BCBUS2 53 BDBUS3 41 BDBUS4 43 BDBUS5 44 BDBUS6 45 BDBUS7 46 ACBUS3 29 ACBUS4 30 ACBUS5 32 ACBUS6 33 ACBUS7 34 BCBUS3 54 BCBUS4 55 BCBUS5 57 BCBUS6 58 BCBUS7 59 GND 25 GND 35 GND 47 GND 51 PWREN60 VCORE64 VCORE12 VCORE37 VCCIO42 VCCIO56 VPLL9 VPHY4 U401 FT2232HL VBUS 1 D+ 3D- 2 ID 4 GND 5 BU401 Micro USB GND R402 27R R403 27R R404 12K/1% C406 3,3uF VDD_FT L401 MMZ1608R300A CB401 100n GND R401 CB403 100n CB402 100n CB404 100n C401 10μ/6VGND VDD_FT R405 10K R407 opt R406 2K2 CB406 100n R450 1K_opt CB407 100n GND V_UC ADBUS0 ADBUS1 ADBUS2 ADBUS3 ADBUS4 ADBUS5 ADBUS6 ADBUS7 ACBUS0 ACBUS1 ACBUS2 ACBUS3 R409 10K V_UC TMS /TRST_J DAP0_A USR0 /RESET D401 LB T673 R411 100R VDD_FT /PORST ADBUS0 ADBUS1 ADBUS2 ADBUS3 ADBUS4 ADBUS6 ACBUS0 ACBUS1 ACBUS5 ACBUS6 BDBUS0 BDBUS1 D403 BAT54 USR8 GND R420 4K7 V_UC DAP1_A TDI /TRST DAP0_A DAP1_A P15.3 P15.2 BDBUS0 BDBUS1 CB409 100n R412 680R D402 LP T67K VDD_FT R414 4K7 R416 10K R418 10K R417 10K R419 10K VDD_FT V_UC VDD_FT V_UC R415 10K V_UC R410 10K VDD_FT R421 opt R422 optGND GND R440 0R_opt GND GND 1 3 Y401 NX3225SA-12MHz C404 8pF C405 8pF VDD_FT GND GND R441 10K VDD_FT GND VDD_FT VDD_FT R442 10K OUT 3 GND2 IN1 U405 TLE4274GSV33 GND GND CB411 100n CB410 100n CB412 100n GND GND C402 4u7/6VGND CB405 100n VDD_FT GND L402 MMZ1608R300AC403 4u7/6V GND CB413 100n GND GND VDD_FT VDD_FT +1V8 /OE1 VCC 5 GND 3Y4 U404 SN74LVC1G125 CB408 100n VDD_FT GND R443 10K VDD_FT CB415 100n CB414 100n GND VDD_FT V_UC GNDR444 4K7 GND ADBUS2 ACBUS3 DIR5 VCCA1 VCCB 6 GND 2 B 4 U406 SN74LVC1T45DBV DIR5 VCCA1 VCCB 6 GND 2 B 4 U407 SN74LVC1T45DBV CB417 100n CB416 100n VDD_FT V_UC GNDR445 4K7 GND GND ACBUS2 ACBUS5 GND USR1 DIR5 VCCA1 VCCB 6 GND 2 B 4 U408 SN74LVC1T45DBV CB419 100n CB418 100n VDD_FT V_UC GND GND R446 4K7 GND GND ADBUS1 ACBUS5 ACBUS5 ACBUS4 P21.7 P21.7 P21.6 P21.6 ACBUS7 ACBUS7 ACBUS6 ACBUS6 ACBUS7 ACBUS3 ACBUS2 R413 10K R447 0R_optR448 0R_optR449 0R_opt ACBUS4 R454 5K1 DAP1_A ORG 6DNC7 VCC8 CS 1 GND5 CLK 2 D 3 U402 93LC46B-I/SN 1A12 1Y1 18 1A24 1Y2 16 1A36 1Y3 14 1A48 1Y4 12 VCC 20 GND 10 2Y1 9 2Y2 7 2Y3 5 2Y4 3 G19 2A111 2A213 2A315 2A417 U403 SN74AHC244PW R456 P20.0 R455 P21.7R451 0R_opt R423 0R_opt FOR USING WIGGLER WITH JTAG: Assemble R447-R451 Remove R455-R456 P21.6 P21.7 P20.0 P21.7 Q401A BSD235N 3 4 Q401B BSD235N Q402A BSD235N 3 4 Q402B BSD235N Q403A BSD235N 3 4 Q403B BSD235N VDD_USB R431 100K V_UC /DBG_PORST GND 1TCK / DAP02 /TRST 3TDO / DAP24 TMS / DAP1 5TDI / -6 BRKIO 7VDDsense8 ESR0 9/PORST10 X404 ETK_CON_opt V_UC/DBG_PORST /ESR0 DAP0_A P21.6 /ESR0 P21.7 P21.7 GND DAP1_A /TRSTR439 22R_opt R433 0R_opt P21.7 P21.7 P20.2 P20.2 R437 P14.1 P14.0 R436 R438 0R_opt P21.7 P20.2 DAP0_A R408 /DBG_PORST V_UC GND DAP3_USR1 DAP0 DAP1 /DBG_PORST R430 0R_opt R429 DAP2 R452 P21.6 P20.2 GND VREF 1 GND 3 GND 5 KEY 7 GND 9 DAP12 DAP04 USER18 USER06 RESET10 X406 DAP_SCR P33.6 P33.7 R457 V_STBY
User Manual 7-6 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09 TriBoard Manual TC3X4L Hardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 Schematic and Layout Figure 7-5 Schematic - Power Supply D D C C B B A A
5 Infineon Technologies AG
Tel.: +49-89-234-0 15.10.2018 Number: Date: Sheet: of TriBoard TC3X4L Power supply 1.0Revision: G:\\Technical_Support\\TriCore\\TriBoard\\EDA_DXP\\TriBoard AURIX 2G\\TriBoard TC3X4L\\TriBoard TC3X4L V1.X\\Supply.schFile: D504 LS T67K V_UC +1V25VDD VDDSB S501 RESET GND
1 Q502
4μ7/10V GNDGND V_UC 2 3
1 Q503
V_UC /PORST R513 1K5 GND D507 LP T67K R512 680R GND D506 LP T67K R511 620R +3V3 GND Q504 BC848C R510 82K +1V25 +3V3 V_UC D505 LP T67K CB520 100n GND V_UC V_UC /PORST /ESR0 /ESR1 /ESR1 /ESR0 /PORST /ESR1 /ESR0 /ESR1 /PORST /ESR0 CB512 100nCB513 100n GND GND GND +1V25 C519 2,2μF GND V_UC CB515 100n CB516 100n CB517 100n CB518 100n R521 R522 R523 R524 0R_opt VDDP3 V_UC R538 120R R535 4K7 R531 4K7 R532 10K R533 R537 10K R534 2K2 R536 4K7 GND CB519 100n X501 POWER VCC_IN D501 MSS2P2 C502 100μF/40V CB501 100n GND GND V_PREREGVIN GND VIN V_STBY SW1 43 WDI16 QST5 VS145 WAK4 RSH47 PG1 41VS244 VST2 ENA3 AG1 6 SW2 42 FRE24 ROT17 INT18 SDO13 SCL14 QUC 30 QCO 31 SYN 19 QT1 33 QT2 32 VCI 26 SEC 23 EVC 21 SCS15 ERR20 BSG1 RSL48 STU25 DRG46 GND HS SDI12 SS111 SS210 QVR 29 AG2 7 AG3 8 AG4 28 AGS 9 TM 22 GST 27 PG2 40 FB1 34 FB2 35 FB3 36 FB4 37 FB5 38 AG5 39 U501 TLF35584QVVS1/2 V_VR V_CO S502 ENA GND GND C507 1μF/10V GND C512 4,7μF/10V GND V_UC QT1 QT2 GND R507 100K /PORST 3 2 Q505 BSS138N /ESR1 P14.6 GND P02.7 C503 22μF/10V C508 4,7μF/10V C509 4,7μF/10V C510 4,7μF/10V C511 4,7μF/10V GND GND V_STBY R506 100K GND R502 10K P33.8 D502 SS26 VDD_USB L501 XAL5050-223MEB L502 XAL4030-472MEC R501 250mR 1,2,5,6 Q501 BSL606SN C501 47μF/40V GND GND GND D503 SS22_opt GND R508 R509 20K GND V_CO CB502 100n R504 470R D508 LP T67KGND P15.8 P15.6 P15.2 R505 10K R503 P33.9 Q 1 GND6 SENSE/ADJ 2 BYP 4 IN8 EN5 GND HS U502 TLS205B0EJV33 GND V_UC C505 10μF C504 10nF +3V3 GND GND VGATE1N Q506 BSZ15DC02KD GND V_UCC521 22μF L503 LTF5022T-3R3N2R5 C520 10μF VGATE1P CB510 100n R520 GND V_STBY X502 EmW_Pwr_opt GND VDDSB VCC_IN /PORST R525 0R_opt +3V3 P33.10 PORT[00..33] PORT[00..33] C522 10μF GND PGND8 LSCON 5 VCC 7 SW1 PWM 6SW2 GND4GND HS PGND3VS9 VS10 U503 TLF11251_opt C506 10μF_opt GND V_UC GND CB506 100n_opt GND GND V_PREREG POWER VEXT125 VEXT23 ESR196 ESR098 PORST97 VDD127 VEXT78 VDDP3126 P32.0 / VGATE1N70 P32.1 / VGATE1P71 VDD22 VDD58 VDD99 VSS HS VDD / VDDSB10 VEVRSB59 U201A TC3X4_LQFP CB511 100n
User Manual 7-7 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09 TriBoard Manual TC3X4L Hardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 Schematic and Layout Figure 7-6 Schematic - Connectors (Plug) D D C C B B A A
6 Infineon Technologies AG
Tel.: +49-89-234-0 15.10.2018 Number: Date: Sheet: of TriBoard TC3X4L Connectors plug 1.0Revision: G:\\Technical_Support\\TriCore\\TriBoard\\EDA_DXP\\TriBoard AURIX 2G\\TriBoard TC3X4L\\TriBoard TC3X4L V1.X\\Connectm.schFile: PERIPHERALS PORTS TOPPLUG1 X601 FTSH-140-02-L-DV-ES-A PLUG1 X602 FTSH-140-02-L-DV-ES-A PLUG1 X604 FTSH-140-02-L-DV-ES-A PLUG1 X603 FTSH-140-02-L-DV-ES-A ADC GND /ESR0 GND VCC_IN VCC_IN GNDGND GND GND GNDVDDSB +3V3V_UC XTAL[1..2] /PORST /ESR0/ESR1 NC2.9 NC2.17 NC2.11 NC2.13 /ESR1 P15.3 P15.2 P20.14 P20.12 NC2.10 NC2.14 /PORST XTAL1 XTAL2 NC2.12 P15.5 P15.1 P15.0P14.0 P14.1 P15.4 P20.11 NC2.18 NC2.54 P15.8 NC2.73 NC2.72 P10.3 NC2.21 P10.5 NC2.24 P10.2 P23.1 P13.1 P13.0 P13.3 P13.2 NC2.25 P22.1 P22.0 P22.3 P22.2 NC2.26 P20.9 P20.10 P20.13 P00.4 P20.3 P20.6P33.5 P20.2 P00.0 P00.1 P00.2 P00.3 NC2.66 P00.5 P00.12 P32.4 NC2[5..80] NC2[5..80] XTAL[1..2] V_UC +3V3 GND GND GND PORT[00..33] GND VDDM GND VAREF1 GND GND V_UC +3V3 P00.8 P33.12 P14.3 P33.11 P00.6 P00.7 GND P02.6 P02.7 P02.8 P33.7 GND P00.9 NC4.7 P02.0 P02.1 P02.2 P02.3 P02.4 P02.5 NC4.21 NC4.23 NC4.25 NC4.27 NC4.29 NC4.31 P10.1 P10.6 NC4.37 NC4.39 NC4.67 NC4.22 NC4.24 P15.6 P15.7 NC4.30 NC4.32 NC4.34 NC4.36 NC4.44 NC4.42 P33.9 NC4[5..80] P23.2 NC4.40 NC4.46 PORT[00..33] NC4[5..80] NC4.50 NC4.48 AN[0..47]AN[0..47] NC4.54 P33.8 P33.10 NC4.52 NC4.66 P33.13 NC4.68 NC4.64P33.6 NC3.65 NC3.66 NC3.63 P33.4NC3.67 P20.7 P20.8 NC4.14 P14.6 NC4.18 NC4.20 NC4.12 NC4.10 NC4.8 NC4.6 NC4.69 NC4.74 NC4.72 NC4.76 NC4.71 NC4.73 NC4.70 VAREF2 VFLEX NC1.5 NC1.7 NC1.9 NC1.11 NC1.13 NC1.15 NC1.17 NC1.19 NC1.21 NC1.23 NC1.25 NC1.27 NC1.29 NC1.31 NC1.33 NC1.35 NC1.37 NC1.39 NC1.41 NC1.43 NC1.45 NC1.47 NC1.49 NC1.51 NC1.53 NC1.55 NC1.57 NC1.59 NC1.61 NC1.63 NC1.65 NC1.67 NC1.69 NC1.71 NC1.73 NC1.75 NC1.77 NC1.79 P21.6 P21.7 NC1.10 NC1.12 NC1.14 NC1.16 NC1.18 NC1.20 NC1.22 NC1.24 NC1.26 NC1.28 NC1.30 NC1.32 NC1.34 NC1.36 NC1.38 NC1.40 NC1.42 NC1.44 NC1.46 NC1.48 P21.2 P21.3 P21.4 P21.5 NC1.58 NC1.60 NC1.62 NC1.64 NC1.66 NC1.68 NC1.70 P20.0 NC1.74 NC1.80 NC1.78 NC1.76 AN0 AN1 AN2 AN3 AN4 AN5 AN6 AN7 AN8 NC3.23 AN10 AN11 AN12 AN13 NC3.33 NC3.35 AN16 AN17 NC3.10 NC3.12 AN20 AN21 NC3.18 NC3.20 AN24 AN25 NC3.26 NC3.28 NC3.30 NC3.32 NC3.34 NC3.36 NC3.45 NC3.47 NC3.49 AN35 AN36 AN37 AN38 AN39 NC3.46 NC3.48 NC3.50 NC3.52 AN44 AN45 AN46 AN47 NC4.41 NC4.43 P11.2 P11.3 NC4.49 NC4.51 P11.6 NC4.55 NC4.57 P11.9 P11.10 P11.11 P11.12
User Manual 7-8 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09 TriBoard Manual TC3X4L Hardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 Schematic and Layout Figure 7-7 Schematic - Connectors (Socket) D D C C B B A A
7 Infineon Technologies AG
Tel.: +49-89-234-0 15.10.2018 Number: Date: Sheet: of TriBoard TC3X4L Connectors socket 1.0Revision: G:\\Technical_Support\\TriCore\\TriBoard\\EDA_DXP\\TriBoard AURIX 2G\\TriBoard TC3X4L\\TriBoard TC3X4L V1.X\\Connectf.schFile: BOTTOMSOCKET1 X701 FLE-140-01-G-DV-A SOCKET1 X702 FLE-140-01-G-DV-A SOCKET1 X703 FLE-140-01-G-DV-A SOCKET1 X704 FLE-140-01-G-DV-A GND /ESR0 GND VCC_IN VCC_IN GNDGND GND GND GNDVDDSB +3V3 PERIPHERALS PORTS V_UC XTAL[1..2] /PORST /ESR0/ESR1 NC2.9 NC2.17 NC2.11 NC2.13 /ESR1 P15.3 P15.2 P20.14 P20.12 NC2.10 NC2.14 /PORST XTAL1 XTAL2 NC2.12 P15.5 P15.1 P15.0P14.0 P14.1 P15.4 P20.11 NC2.18 NC2.54 P15.8 P10.3 NC2.21 P10.5 P10.2 P23.1 P13.1 P13.0 P13.3 P13.2 NC2.25 P22.1 P22.0 P22.3 P22.2 P20.9 P20.10 P20.13 P00.4 P20.3 P20.6P33.5 P20.2 P00.0 P00.1 P00.2 P00.3 NC2.66 P00.5 P00.12 P32.4 NC2[5..80] NC2[5..80] XTAL[1..2] ADC V_UC +3V3 GND GND GND PORT[00..34] GND VDDM GND VAREF1 GND GND V_UC +3V3 P00.8 P33.12 P14.3 P33.11 P00.6 P00.7 GND P02.6 P02.7 P02.8 P33.7 GND P00.9 NC4.7 P02.0 P02.1 P02.2 P02.3 P02.4 P02.5 NC4.21 NC4.23 NC4.25 NC4.27 NC4.29 NC4.31 P10.1 P10.6 NC4.37 NC4.39 NC4.67 NC4.22 NC4.24 P15.6 P15.7 NC4.30 NC4.32 NC4.34 NC4.36 NC4.44 NC4.42 P33.9 NC4[5..80] P23.2 NC4.40 NC4.46 PORT[00..34] NC4[5..80] NC4.50 NC4.48 AN[0..47]AN[0..47] NC4.54 P33.8 P33.10 NC4.52 NC4.66 P33.13 NC4.68 NC4.64P33.6 P33.4 P20.7 P20.8 NC4.14 NC4.18 NC4.20 NC4.12 NC4.10 NC4.8 NC4.6 NC4.69 NC4.74 NC4.72 NC4.76 NC4.71 NC4.73 NC4.70 VAREF2 VFLEX NC1.5 NC1.7 NC1.9 NC1.11 NC1.13 NC1.15 NC1.17 NC1.19 NC1.21 NC1.23 NC1.25 NC1.27 NC1.29 NC1.31 NC1.33 NC1.35 NC1.37 NC1.39 NC1.41 NC1.43 NC1.45 NC1.47 NC1.49 NC1.51 NC1.53 NC1.55 NC1.57 NC1.59 NC1.61 NC1.63 NC1.65 NC1.67 NC1.69 NC1.71 NC1.73 NC1.75 NC1.77 P21.6 P21.7 NC1.10 NC1.12 NC1.14 NC1.16 NC1.18 NC1.20 NC1.22 NC1.24 NC1.26 NC1.28 NC1.30 NC1.32 NC1.34 NC1.36 NC1.38 NC1.40 NC1.42 NC1.44 NC1.46 NC1.48 P21.2 P21.3 P21.4 P21.5 NC1.58 NC1.60 NC1.62 NC1.64 NC1.66 NC1.68 NC1.70 P20.0 NC1.74 NC1.78 NC1.76 AN0 AN1 AN2 AN3 AN4 AN5 AN6 AN7 AN8 NC3.23 AN10 AN11 AN12 AN13 NC3.33 NC3.35 AN16 AN17 AN20 AN21 NC3.18 NC3.20 AN24 AN25 NC3.34 NC3.36 NC3.49 AN35 AN36 AN37 AN38 AN39 NC3.46 NC3.48 NC3.50 NC3.52 AN44 AN45 AN46 AN47 NC4.41 NC4.43 P11.2 P11.3 NC4.49 NC4.51 P11.6 NC4.55 NC4.57 P11.9 P11.10 P11.11 P11.12 NC3.65 NC3.66 NC3.63 NC3.67 NC1.79 NC1.80 NC2.73 NC2.72 NC2.24 NC2.26 NC3.10 NC3.12 NC3.26 NC3.28 NC3.30 NC3.32 NC3.45 NC3.47 P14.6
User Manual 7-9 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09 TriBoard Manual TC3X4L Hardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 Schematic and Layout
7.3 Layout
Figure 7-8 Component Plot Top Layer U201 R395 X4 04 R212 S5 02 R222 CB205 R379 R372 C305 C310 X30 6 CB313 CB314 CB315 C311 U307 Y301 X604 R249 R246 R245 R244 X40 2 S201 R377 R204 R205 R2 15 R214 X201 X305X304X303 R240 R236 R234 R232 R230 R223 R361 R359 R211 D301 CB206 C303 U408 U407 U406 R451 R455 R456 R454 R446 R444 CB419 CB418 CB417CB416 CB415 CB414 D401 R430 R429 R423 CB405 C402 R4 11 BU 401 L401 D402 R401 CB401 U404 U401 Y4 01 CB408 R4 03 R402 CB402 R344 R524 R424 R425 R426 R427 R428 CB520 R201 CB204 R203 R202 C2 01 C202 R206 R207 Y201 R337 R357 R324 R399 R391 R392 R393 R3 94 R396 R3 97 CB309 R532 C301 C302 R439 R531 R335 R336 R355 R356 U305 T301 T302 X301 X302 X602X603 X601 D302 D303 D304 D305 D306 D307 D308 D309 D505 D506 D507D504 X401 X501 S501 R354 C519 R452 CB203 R213 R216 R398 U502C505 D508 U501 L502 L 501 CB501 C502 C507 C509 C508 C501 C503 C504 R501 R507 R508 R509 CB502 R231 R233 R235 R237 R241 R255R256 R390 R375 R376 R348 R349 R525 S202 X502 R346 R347 R457 X406 C522 CB316 CB317 U308 R248
User Manual 7-10 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09 TriBoard Manual TC3X4L Hardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 Schematic and Layout Figure 7-9 Component Plot Bottom Layer X703 CB511 R388 R380 R378 Q301 R368 R371 R382 R419 R440 R369 R367 C320 C317 C316 C315 C314 C313 C312 Q4 03 R389 R383 R385 R370 CB 311 CB312 C208 C207 C205 C204C203 R433 R523 R431 R381 R314 R252R250 R251R253 R254 CB202 R208 R408 U306 R521 R238 R3 65 R364 R363 R362 R360 CB310 C304 R449 R448 R447 R445 R443 R413 U405 L40 2 CB413 C403 D403 R404 C401 R450 R442 R441CB412 CB411 CB410 C405 C4 04 R422 R421 U4 03 Q402 Q4 01 R412 C406 R420 R414 R418 R417 R416 R415 R410 R409 CB407 CB403 R407 U402 R406 R405 CB406 CB404 R305 R306 R308 R309 R315 R316 R318 R319 R522 R301 R3 11 R341 R340 R321 R3 22 R220 R221 R533 R323 R343 CB301 CB302 CB512 CB 513 CB515 CB516 CB517 CB518 CB519 R537 R307 R317 R538 R534 R513 R535 R5 36 C515 R511 R512 R510 Q502 Q504 Q503 X702 X704X701 U301 U302 R302 R342 CB303 CB304 CB305 CB306 CB307 CB308 R303 R304 R338 R3 30 R331 R358 R350 R351 U303 U304 R332 R334 R333 R352 R353 R320 CB201 R209 CB510 R520 D503 R505R504 C510 R502 R506 Q505 Q5 01 D501 C512 C511 D502 R503 R239 R312 R436 R437 R438 R313 R373 R374 Q5 06 L503 C520 C521 C506CB506 U503 CB409R386 C306
User Manual 7-11 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09 TriBoard Manual TC3X4L Hardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 Schematic and Layout
7.4 Layout with Dimensioning
The following dimensions should be used for development of extension boards. Figure 7-10 Dimensioning (mm)
User Manual 7-12 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09 TriBoard Manual TC3X4L Hardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 Schematic and Layout Figure 7-11 Dimensioning (mil) The dimensioning is valid for all TriBoards.
User Manual RevisionHistory-1 V1.2 TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0 2019-09 TriBoard Manual TC3X4L Hardware: TriBoard TC3X4L TH V1.0 and TriBoard TC3X4L V1.0
Revision History
Page or Item Subjects (major changes since previous revision) V1.2, 2019-09 Table 5-6 correct Short name and Description for SDO from TLF35584 chapter 3.10 add description for LIN master and slave changes Revision History add complete history of all previous versions V1.1, 2019-06 all add TC364 in LQFP package as usable devi ce and adapt description for this devices chapter 3 add detailed description of usable devices/restricted devices V1.0, 2017-11 First version
Trademarks of Infineon Technologies AG µHVIC™, µIPM™, µPFC™, AU-ConvertIR™, AURIX™, C166™, CanPAK™, CI POS™, CIPURSE™, CoolDP™, CoolGaN™, COOLiR™, CoolMOS™, CoolSET™, CoolSiC™, DAVE™, DI-POL™, DirectFET™, DrBlade™, Easy PIM™, EconoBRIDGE™, EconoDUAL™, EconoPACK™, EconoPIM™, EiceDRIVER™, eupec™, FCOS™, Ga NpowIR™, HEXFET™, HITFET™, HybridPACK™, iMOTION™, IRAM™, ISOFACE™, IsoPACK™, LEDrivIR™, LITIX™, MIPAQ™, ModSTACK™, my-d™, NovalithIC™, O PTIGA™, OptiMOS™, ORIGA™, PowIRaudio™, PowIRStage™, PrimePACK™, PrimeSTACK™, PROFET™, PRO-SIL™, RASIC™, REAL3™, SmartLEWIS™, SOLID FLAS H™, SPOC™, StrongIRFET™, SupIRBuck™, TEMPFET™, TRENCHSTOP™, TriCore™, UHVIC™, XHP™, XMC™. Trademarks updated November 2015 Other Trademarks All referenced product or service names and trademarks are the property of their respective owners. Edition 2019-09 Published by Infineon Technologies AG
81726 Munich, Germany
© 2019 Infineon Technologies AG. All Rights Reserved. Do you have a question about any aspect of this document? Email: erratum@infineon.com Document reference Doc_Number IMPORTANT NOTICE The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics ("Beschaffenheitsgarantie"). With respect to any examples, hints or any typical values stated herein and/or any information regarding the application of the product, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. In addition, any information given in this document is subject to customer's compliance with its obligations stated in this document and any applicable legal requirements, norms and standards concerning customer's products and any use of the product of Infineon Technologies in customer's applications. The data contained in this document is exclusively intended for technically trained staff. It is the responsibility of customer's technical departments to evaluate the suitability of the product for the intended application and the completeness of the product information given in this document with respect to such application. For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com). WARNINGS Due to technical requirements products may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies office. Except as otherwise explicitly approved by Infineon Technologies in a written document signed by authorized representatives of Infineon Technologies, Infineon Technologies’ products may not be used in any applications where a failure of the product or any consequences of the use thereof can reasonably be expected to result in personal injury. Please read the Important Notice and Warnings at the end of this document