TA9 TIMOTION | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 11

Technical content

TiMOTION’s TA9 is one of the smart furniture actuator options with compact dimension. This linear actuator is designed with a custom gear box, molded with a specially formulated plastic material which allows the TA9 to support load ratings up to 2500N. An EMC certification has been attained for this series, which is also available with optional IP54 or IP66 protection. General Features Max. load 2,500N (push); 1,000N (pull) Max. speed at max. load 5.1mm/s Max. speed at no load 58.3mm/s Retracted length ≥ Stroke + 140mm IP rating IP66 Certificate IEC60601-1, ES60601-1, IEC60601-1-2, UL962, EMC Stroke 20 ~ 600mm Options Hall sensors Voltage 12 / 24V DC; 12 / 24V DC (PTC) Color Black or grey Operational temperature range +5°C~+45°C Product Segments

  • Comfort Motion
  • Ergo Motion TA9 series

(mm) Drawing Retracted Length 145 63.5 63.5 84.5 19.5 ø20

1 Please refer to the approved drawing for the final authentic value. 2 This self-locking force level is reached only when a short circuit is applied on the terminals of the motor. All the TiMOTION control boxes have this feature built-in. 3 The current & speed in table are tested with 24V DC motor. With a 12V DC motor, the current is approximately twice the current measured in 24V DC; speed will be similar for both voltages. 4 The current & speed in table are tested when the actuator is extending under push load. 5 The current & speed in table and diagram are tested with TiMOTION control boxes, and there will be around 10% tolerance depending on different models of the control box. (Under no load condition, the voltage is around 32V DC. At rated load, the voltage output will be around 24V DC) 6 Standard stroke: Min. ≥ 20mm, Max. please refer to below table. Load and Speed CODE Load (N) Self Locking Force (N) Typical Current (A) Typical Speed (mm/s) Push Pull No Load 32V DC With Load 24V DC No Load 32V DC With Load 24V DC Motor Speed (4100RPM, Duty Cycle 10%) A 2000 1000 2000 1.0 2.5 9.4 5.0 B 1500 1000 1500 1.0 2.5 13.8 6.8 C 1000 1000 1000 1.0 3.0 26.1 11.6 D 800 800 800 1.0 2.8 36.9 16.6 F 500 500 500 1.0 2.8 58.3 30.0 Motor Speed (3800RPM, Duty Cycle 10%) G 2500 1000 2500 1.1 2.7 9.3 5.1 H 2000 1000 2000 1.1 2.9 13.2 7.0 I 1500 1000 1500 1.1 3.5 26.0 12.5 K 1000 1000 1000 1.1 3.2 36.5 17.8 L 700 700 700 1.1 3.2 56.5 24.2 Motor Speed (3400RPM, Duty Cycle 10%) M 1500 1000 1500 0.8 1.6 8.1 3.8 N 1000 1000 1000 0.8 1.4 11.6 5.9 O 500 500 500 0.8 1.4 21.9 11.3 P 400 400 400 0.8 1.4 30.0 15.5 Q 300 300 300 0.8 1.4 46.5 24.0 Motor Speed (2200RPM, Duty Cycle 10%) V 2000 1000 2000 0.8 1.4 5.6 2.6 R 1500 1000 1500 0.8 1.4 8.1 3.7 S 1000 1000 1000 0.8 1.5 16.5 6.9 T 800 800 800 0.8 1.4 22.5 10.0 U 500 300 500 0.8 1.4 35.5 15.6 CODE Load (N) Max Stroke (mm) C, D, F, K, L, N, O, P, Q, S, T, U ≤ 1000 600 B, I, M, R ≤ 1500 500 A, H, V ≤ 2000 450 G ≤ 2500 400

Motor Speed (4100RPM, Duty Cycle 10%) Performance Data (24V DC Motor) 0.0 30.0 50.0 20.0 40.0 10.0 70.0 60.0 0 1000 2000 3000 4000 5000 B A C F D Speed (mm/s) Speed vs. Thrust Thrust (N) 0.0 3.0 5.0 2.0 4.0 1.0 6.0 0 1000 2000 3000 4000 5000 B A C F D Current (A) Current vs. Thrust Thrust (N) TA9 series

Motor Speed (3800RPM, Duty Cycle 10%) Performance Data (24V DC Motor) 0.0 30.0 50.0 20.0 40.0 10.0 70.0 60.0 0 1000 2000 3000 4000 5000 H G I L K Speed (mm/s) Speed vs. Thrust Thrust (N) 0.0 3.0 5.0 2.0 4.0 1.0 6.0 0 1000 2000 3000 4000 5000 H G IL K Current (A) Current vs. Thrust Thrust (N) TA9 series

Motor Speed (3400RPM, Duty Cycle 10%) Performance Data (24V DC Motor) 0.0 30.0 50.0 20.0 40.0 10.0 70.0 60.0 0 1000 2000 3000 4000 5000 N M O Q P Speed (mm/s) Speed vs. Thrust Thrust (N) 0.0 3.0 5.0 2.0 4.0 1.0 6.0 0 1000 2000 3000 4000 5000 N M OQ P Current (A) Current vs. Thrust Thrust (N) TA9 series

Motor Speed (2200RPM, Duty Cycle 10%) Performance Data (24V DC Motor) 0.0 30.0 50.0 20.0 40.0 10.0 0 1000 2000 3000 4000 5000 R V S U T 60.0 Speed (mm/s) Speed vs. Thrust Thrust (N) 0.0 3.0 5.0 2.0 4.0 1.0 6.0 0 1000 2000 3000 4000 5000 R VSU T Current (A) Current vs. Thrust Thrust (N) TA9 series

Version: 20210521-O Load and Speed Voltage Cable Length (mm) Output Signal IP Rating Connector See page 11 Color Direction of Rear Attachment See page 10 1 = 12V DC 2 = 24V DC 5 = 24V DC, PTC 6 = 12V DC, PTC 0 = Straight, 100 1 = Straight, 500 2 = Straight, 750 3 = Straight, 1000 4 = Straight, 1250 5 = Straight, 1500 6 = Straight, 2000 7 = Coiled, 200 8 = Coiled, 400 B~H = For direct cut system See page 11 0 = Without 5 = Hall sensor * 2 1 = Without 2 = IP54 3 = IP66 1 = DIN 6P , 90° plug 2 = Tinned leads 4 = Big 01P , plug C = Y cable ( for direct cut system, water proof, anti pull) E = Molex 8P , 180° plug P = Molex 8P , 90° plug, without anti-clip 1 = Black 2 = Pantone 428C 1 = 0° 2 = 90° Stroke (mm) Retracted Length (mm) Functions for Limit Switches See page 11 1 = Two switches at full retracted / extended positions to cut current 2 = Two switches at full retracted / extended positions to cut current + 3rd LS to send signal 3 = Two switches at full retracted / extended positions to send signal 4 = Two switches at full retracted / extended positions to send signal + 3rd LS to send signal See page 3 See page 3 See page 9 Rear Attachment (mm) See page 10 Special Functions for Spindle Sub- Assembly Front Attachment (mm) See page 10 1 = Plastic, U clevis, slot 5.2, depth 13.0, hole 8.0, with plastic T-busing 0 = Without 2 = Standard push only 1 = Aluminum casting, no slot, hole 8.0 3 = Aluminum casting, U clevis, width 6.0, depth 13.0, hole 8.0 4 = Aluminum casting, U clevis, width 6.0, depth 13.0, hole 10.0

  1. Calculate A+B = Y 2. Retracted length needs to ≥ Stroke+Y Retracted Length (mm) B. Stroke (mm) 20~200 - 201~250 +5 251~300 +10 301~350 +15 351~400 +20 401~450 +25 451~500 +30 501~550 +35 551~600 +40 A. Front Attach. 1, 2 +140 3, 4 +153

Rear Attachment (mm) 1 = Plastic, U clevis, slot 5.2, depth 13.0, hole 8.0, with plastic T-busing 5.2 1 = Aluminum casting, no slot, hole 8.0 3 = Aluminum casting, U clevis, width 6.0, depth 13.0, hole 8.0 Front Attachment (mm) ø20 ø20 4 = Aluminum casting, U clevis, width 6.0, depth 13.0, hole 10.0 ø10 ø20 1 = 0° 2 = 90° Direction of Rear Attachment Hole Hole 90º

Functions for Limit Switches Wire Definitions CODE Pin 1 (Green) 2 (Red) 3 (White) 4 (Black) 5 (Yellow) 6 (Blue) 1 extend (VDC+) N/A N/A N/A retract (VDC+) N/A 2 extend (VDC+) N/A middle switch pin B middle switch pin A retract (VDC+) N/A 3 extend (VDC+) common upper limit switch N/A retract (VDC+) lower limit switch 4 extend (VDC+) common upper limit switch medium limit switch retract (VDC+) lower limit switch 1 = DIN 6P , 90° plug 2 = Tinned leads Connector 1 = DIN 6P , 90° plug 2 = Tinned leads P = Molex 8P , 90° plug, without anti-clip C = Y cable (For direct cut system, water proof, anti pull) E = Molex 8P , 180°plug 4 = Big 01P , plug Cable length for direct cut system (mm) CODE L1 L2 L3 B 100 100 100 C 100 1000 400 D 100 2700 500 E 1000 100 100 F 100 600 1000 G 1500 1000 1000 H 100 100 1200 Terms of Use The user is responsible for determining the suitability of TiMOTION products for a specific application. TiMOTION products are subject to change without prior notice. L2 L1