TA5P

TA5P TIMOTION | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 7

Technical content

• Comfort Motion TA5P series TiMOTION’s TA5P is designed using a one-piece aluminum outer cover for increased strength and enhanced protection from contaminants. The TA5P utilizes a linear slide to move the load, instead of a standard extension tube. Industry certifications for the TA5P include EMC, and RoHS. It is also available with Hall sensors for position feedback and a special L-shaped mounting bracket. General Features Max. load 6,000N (push) 3,000N (pull) Max. speed at max. load 4.1mm/s Max. speed at no load 58mm/s Retracted length ≥ 157mm Certificate UL962, EN 61000-6-1, EN 61000-6-3 Options Hall sensors, L-shaped bracket Voltage 12 / 24 / 36V DC Color Black Specially designed for recliner One-piece design, stronger structure, cable-free

(mm) Drawing 82.2 34 44 2924 104 82.2 172.9 Stroke Retracted length

1 Option C / D / E / F / G / J / L / M / N / O / Q / T use iron bearing, others use plastic. 2 Please refer to the approved drawing for the final authentic value. 3 This self-locking force level is reached only when a short circuit is applied on the terminals of the motor. All the TiMOTION control boxes have this feature built-in.

4 Operational temperature range at full performance: +5°C~+45°C

5 The current & speed in table are tested with 24V DC motor. With a 12V DC motor, the current is approximately twice the current measured in 24V DC. With a 36V DC motor, the current is approximately two-thirds the current measured in 24V DC. Speed will be similar for all the voltages. 6 The current & speed in table are tested when the actuator is extending under push load. 7 The current & speed in table and diagram are tested with TiMOTION control boxes, and there will be around 10% tolerance depending on different models of the control box. (Under no load condition, the voltage is around 32V DC. At rated load, the voltage output will be around 24V DC) Load and Speed CODE Load (N) Self Locking Force (N) Typical Current at Rated Load (A) Typical Speed (mm/s) Push Pull No Load 32V DC With Load 24V DC No Load 32V DC With Load 24V DC Motor Speed (2600RPM, Duty Cycle 10%) A 750 750 750 1.0 2.8 47.0 25.0 C 5000 3000 5000 1.0 3.5 7.5 3.9 D 6000 3000 6000 1.0 3.5 6.0 3.1 E 3000 3000 3000 1.0 3.2 11.5 6.6 F 2500 2500 2500 1.0 3.5 17.5 8.5 G 2000 2000 2000 1.0 3.5 23.0 13.3 H 1200 1200 1200 1.0 3.2 34.5 18.5 J 3000 3000 3000 1.0 3.3 11.9 6.0 Motor Speed (3400RPM, Duty Cycle 10%) L 6000 3000 6000 1.1 4.0 7.5 4.1 M 3000 3000 3000 1.1 3.4 14.6 8.3 N 2500 2500 2500 1.1 4.1 22.0 12.0 O 2000 2000 2000 1.1 4.6 29.0 15.5 P 1200 1200 1200 1.1 3.6 43.5 23.5 Q 3000 3000 3000 1.1 4.2 14.5 7.6 S 750 750 750 1.1 3.5 58.0 32.5 T 5000 3000 5000 1.1 4.2 9.3 5.3 TA5P series

Motor Speed (2600RPM, Duty Cycle 10%) Performance Data (24V DC Motor) TA5P series A C D EF G H J 0.0 10.0 20.0 30.0 60.0 50.0 40.0 0 2000 4000 6000 80001000 3000 5000 7000 9000 10000 Speed (mm/s) Speed vs. Load Load (N) A C D E FG H J 0.0 1.0 2.0 3.0 6.0 5.0 4.0 0 2000 4000 6000 80001000 3000 5000 7000 9000 10000 Current (A) Current vs. Load Load (N)

Motor Speed (3400RPM, Duty Cycle 10%) Performance Data (24V DC Motor) TA5P series L M N O P Q S T 0.0 10.0 20.0 30.0 60.0 50.0 40.0 0 2000 4000 6000 80001000 3000 5000 7000 9000 10000 Speed (mm/s) Speed vs. Load Load (N) L M N O P Q S T 0.0 1.0 2.0 3.0 6.0 5.0 4.0 0 2000 4000 6000 80001000 3000 5000 7000 9000 10000 Current (A) Current vs. Load Load (N)

Version: 20210517-M Load and Speed Voltage Cable Length (mm) Plug See page 7 Output Signal 1 = 12V DC 2 = 24V DC 3 = 36V DC 0 = Without (for direct cut system, no cable) 1 = Straight, 500 2 = Straight, 750 3 = Straight, 1000 4 = Straight, 1250 5 = Straight, 1500 6 = Straight, 2000 7 = Curly, 200 8 = Curly, 400 1 = DIN 6P , 90° 2 = Tinned leads 0 = Without 2 = Hall sensor*2 Stroke (mm) Retracted Length (mm) See page 3 ≥ 157 Note: please contact TiMOTION before making an order L-Shaped Bracket on The Front The Slot Position on Outer Tube Functions for Limit Switches See page 7 0 = Without 1 = With 1 = Two switches at full retracted / extended positions to cut current 2 = Two switches at full retracted / extended positions to cut current + third one in between to send signal 3 = Two switches at full retracted / extended positions to send signal 4 = Two switches at full retracted / extended positions to send signal + third one in between to send signal 1 = Front 2 = Reverse

Functions for Limit Switches Wire Definitions CODE Pin 1 (Green) 2 (Red) 3 (White) 4 (Black) 5 (Yellow) 6 (Blue) 1 extend (VDC+) N/A N/A N/A retract (VDC+) N/A 2 extend (VDC+) N/A middle switch pin B middle switch pin A retract (VDC+) N/A 3 extend (VDC+) common upper limit switch N/A retract (VDC+) lower limit switch 4 extend (VDC+) common upper limit switch medium limit switch retract (VDC+) lower limit switch Plug 1 = DIN 6P , 90° 2 = Tinned leads Terms of Use The user is responsible for determining the suitability of TiMOTION products for a specific application. TiMOTION products are subject to change without prior notice.