TA5 TIMOTION | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

  • Comfort Motion Whether you are looking for an appropriate actuator solution for recliner or lift chair, TA5 is one of your best choices. It loads uppermost to 600KG. Besides, the extensive use is assisting the lifting system for a funeral car. General Features Voltage of motor 12V DC, 24V DC, or 36V DC Maximum load 6,000N in push Maximum speed 56.7mm/s Color black Certificate EMC, ETL, RoHS, and EN60601-1 compliant Options Hall sensor, L-shaped bracket Specially designed for recliner Outer tube assembled by 3 aluminum pieces

CODE Rated Load Typical Current at Rated Load (A) Typical Speed Push N No Load (32V DC) mm/s Rated Load (24V DC) mm/s Motor Speed (2600RPM) A 750 3.8 43.2 23.6 C 5000 4 6.6 3.5 D 6000 4 5.4 2.5 E 3000 4 10.7 5.4 F 2500 4 15.8 7.8 G 2000 3.8 21.9 11.9 H 1200 4.2 32.8 17.8 J 3000 4.2 10.7 5 Motor Speed (3400RPM) L 6000 4.8 7.2 3.5 M 3000 4.8 14.6 7.5 N 2500 4.8 21.4 10.8 O 2000 4.5 28.7 14.7 P 1200 5 43.2 20.8 Q 3000 5.2 14.6 6.8 S 750 4.5 56.7 30.5 T 5000 4.8 8.9 4.6 Note

1 The left diagram shows the

speed and current figures under pushing condition.

2 Speed would be the same if

with 12V motor, but with double current consumption. Terms of Use The user is responsible for determining the suitability of TiMOTION products for a specific application. Due to continuous development in order to improve our products, TiMOTION products are subject to frequent modifications and changes without prior notice. TiMOTION reserves the right to discontinue the sale of any products displayed on its website or listed in its catalogue or other written materials drawn up by TiMOTION. Dimension Standard TA5 series Drawing 169.2 ø10 104 84.7 M10 R16 84.8 C=B+47 B(B-A=stroke) A=157 169.2 ø10 104 84.7 M10 R16 84.8 C=B+47 B(B-A=stroke) A=157

Voltage 1 = 12V 2 = 24V 3 = 36V See appendix Stroke Retracted Length Version: 20121221-H 1 = TiMOTION’s standard 6pin plug 2 = Tinned leads A = Customized Plug Cable Length Output Signals Bracket on The Front End 0 = Without 2 = Two Hall sensors 0 = Without 1 = L-shaped bracket 2 = Flat plate (standard) 1 = Two switches at the retracted/extended positions to cut current 2 = Two switches at the retracted/extended positions to cut current with the third one in between to send signal 3 = Two switches at the retracted/extended positions to send signal 1 = Straight, 500mm 2 = Straight, 750mm 3 = Straight, 1000mm 4 = Straight, 1250mm 5 = Straight, 1500mm 6 = Straight, 2000mm 7 = Coiled, 200mm 8 = Coiled, 400mm A = Customized Functions for Limit Switches 4 = Two switches at the retracted/ extended positions and the third one in between to send signal A = Customized