TA43 TIMOTION | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 8

Technical content

  • Comfort Motion TA43 series TiMOTION’s TA43 linear actuator can fulfill a manufacturer’s seating requirement for small installation dimensions. Although small, this linear actuator provides great force. The compact design is merely 100mm, with a maximum stroke length of 300mm, yet can withstand a maximum pressure of 4000N. General Features Max. load 4,000N (push/pull) Max. speed at max. load 2.5mm/s Max. speed at no load 12.1mm/s Retracted length ≥ Stroke + 100mm Stroke 20~300mm Options Hall sensors Voltage 24V DC; 24V DC (PTC) Color Black or grey Operational temperature range +5°C~+45°C

(mm) Drawing Note 1 Please refer to the approved drawing for the final authentic value. 2 The current & speed in table are tested with 24V DC motor. 3 This self-locking force level is reached only when a short circuit is applied on the terminals of the motor. All the TiMOTION control boxes have this feature built-in. 4 The current & speed in table are tested when the actuator is extending under push load. 5 The data in the performance charts shows theoretical value using specific TiMOTION control boxes. 6 Standard stroke: Min. ≥ 20mm, Max. please refer to below table. Please contact TiMOTION for more details. Load and Speed CODE Load (N) Self Locking Force (N) Typical Current (A) Typical Speed (mm/s) Push Pull No Load 32V DC With Load 24V DC No Load 32V DC With Load 24V DC Motor Speed (4100RPM, Duty Cycle 10%) C 3000 3000 3000 1.0 2.7 7.9 3.6 D 2000 2000 2000 1.0 2.7 12.1 5.4 Motor Speed (4500RPM, Duty Cycle 10%) B 4000 4000 4000 1.0 3.1 6.0 2.5 E 3000 3000 3000 1.0 3.1 8.5 5.0 CODE Load (N) Max Stroke (mm) B, C, D, E ≤ 4000 300 123.8 55.7 75.5 55.7 Retracted Length ø22 19.2

Motor Speed (4100RPM) Performance Data (24V DC Motor) TA43 series C D 2.0 0.0 4.0 6.0 8.0 10.0 12.0 14.0 0 40002000 600030001000 5000 Speed (mm/s) Speed vs. Load Load (N) CD 0.5 0.0 1.0 1.5 2.0 2.5 3.0 0 1000 2000 3000500 1500 2500 3500 Current (A) Current vs. Load Load (N)

Motor Speed (4500RPM) Performance Data (24V DC Motor) TA43 series E B 1.0 0.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 0 40002000 600030001000 5000 Speed (mm/s) Speed vs. Load Load (N) E B 0.5 0.0 1.0 1.5 2.0 2.5 3.0 3.5 0 1000 2000 3000500 1500 2500 450040003500 Current (A) Current vs. Load Load (N)

Version: 20201007-H Load and Speed Voltage Cable Length (mm) Output Signals IP Rating Connector See page 8 Color Direction of Rear Attachment (Counterclockwise) See page 7 2 = 24V DC 5 = 24V DC, PTC 0 = Straight, 100 1 = Straight, 500 2 = Straight, 750 3 = Straight, 1000 4 = Straight, 1250 5 = Straight, 1500 6 = Straight, 2000 7 = Curly, 200 8 = Curly, 400 B~H = For direct cut system. See page 8 0 = Without 5 = Hall sensor*2 1 = Without 1 = Black 2 = Pantone 428C 2 = 0° Stroke (mm) Retracted Length (mm) Functions for Limit Switches See page 8 1 = Two switches at full retracted / extended positions to cut current 3 = Two switches at full retracted / extended positions to send signal See page 2 See page 6 See page 2 Rear Attachment (mm) See page 7 Front Attachment (mm) See page 7 1 = DIN 6P , 90° plug 2 = Tinned leads 4 = Big 01P , plug C = Y cable (For direct cut system, water proof, anti pull) E = Molex 8P , 180° plug F = DIN 6P , 180° plug P = Molex 8P , 90° plug, without anti-clip 2 = Punched hole on inner tube + plastic cap, without slot, hole 10.2 5 = Plastic, without slot, hole 8.2, with plastic T-bushing 6 = Plastic, without slot, hole 10.2, with plastic T-bushing 7 = Aluminum casting, U clevis, width 6.2, depth 17.0, hole 8.2 8 = Aluminum casting, U clevis, width 6.2, depth 17.0, hole 10.2 0 = Without 2 = Push onlySpecial Functions for Spindle Sub- Assembly

  1. Calculate A+B = Y 2. Retracted length needs to ≥ Stroke+Y Retracted Length (mm) Front Attach. Rear Attach. 1, 2 2 +100 5, 6 +108 7, 8 +138 Stroke (mm) 20~200 - 201~250 +5 251~300 +10

2 = Punched hole on inner tube + plastic cap, without slot, hole 10.2 5 = Plastic, without slot, hole 8.2, with plastic T-bushing 6 = Plastic, without slot, hole 10.2, with plastic T-bushing 7 = Aluminum casting, U clevis, width 6.2, depth 17.0, hole 8.2 8 = Aluminum casting, U clevis, width 6.2, depth 17.0, hole 10.2 Front Attachment (mm) ø10.2ø22 6.2 26 ø25.7 ø10.2 ø8.2 ø22 ø35 ø10.2 ø22 ø35 ø8.2ø22 6.2 2 = 0° Direction of Rear Attachment (Counterclockwise) 1 = Plastic, U clevis, slot 6.2, depth 13.5, hole 8.2 2 = Plastic, U clevis, slot 6.2, depth 13.5, hole 10.2 Rear Attachment (mm) 6.2 13.5 R15.9 ø8.2 6.2 13.5 R15.9 ø10.2

1 = DIN 6P , 90° plug C = Y cable (For direct cut system, water proof, anti pull) 2 = Tinned leads E = Molex 8P , 180° plug 4 = Big 01P , plug P = Molex 8P , 90° plug, without anti-clip F = DIN 6P , 180° plug Connector Cable Length for Direct Cut System (mm) CODE L1 L2 L3 B 100 100 100 C 100 1000 400 D 100 2700 500 E 1000 100 100 F 100 600 1000 G 1500 1000 1000 H 100 100 1200 L2 L1 Terms of Use The user is responsible for determining the suitability of TiMOTION products for a specific application. TiMOTION products are subject to change without prior notice. Functions for Limit Switches Wire Definitions CODE Pin 1 (Green) 2 (Red) 3 (White) 4 (Black) 5 (Yellow) 6 (Blue) 1 extend (VDC+) N/A N/A N/A retract (VDC+) N/A 3 extend (VDC+) common upper limit switch N/A retract (VDC+) lower limit switch