TA42 TIMOTION | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 6

Technical content

  • Comfort Motion TA42 series TiMOTION’s TA42 linear actuator can fulfill a manufacturer’s seating requirement for small installation dimensions. It comes without any motor housing,which can save on space while being installed in the recliner. TA42’s compact design is only 100mm. It has a maximum stroke length of 200mm, yet it can withstand a maximum pressure of 1500N, which can be perfect for the head position adjustment for recliners. General Features Max. load 1,500N (push/pull) Max. speed at max. load 6.2mm/s Max. speed at no load 13.2mm/s Retracted length ≥ Stroke + 100mm Stroke 25~200mm Options Push only Voltage 24V DC; 24V DC (PTC) Color Black or grey Operational temperature range +5°C~+45°C Suitable for recliner applications

(mm) Drawing Note 1 Please refer to the approved drawing for the final authentic value. 2 The current & speed in table are tested with 24V DC motor. 3 This self-locking force level is reached only when a short circuit is applied on the terminals of the motor. All the TiMOTION control boxes have this feature built-in. 4 The current & speed in table are tested when the actuator is extending under push load. 5 The data in the performance charts shows theoretical value using specific TiMOTION control boxes. Please contact TiMOTION for more details. 6 Standard stroke: Min. ≥ 25mm, Max. please refer to below table. Load and Speed CODE Load (N) Typical Current (A) Typical Speed (mm/s) Push Pull No Load 32V DC With Load 24V DC No Load 32V DC With Load 24V DC Motor Speed (5000RPM, Duty Cycle 10%) D 1500 1500 0.6 1.6 9.2 4.6 E 1500 1500 0.6 1.9 13.2 6.2 CODE Load (N) Max Stroke (mm) D,E ≤ 1500 200 18.8 Retracted Length ø17 5.2 108.9 5.219 12.2 ø8.2 ø8.2

Motor Speed (5000RPM, Duty Cycle 10%) Performance Data (24V DC Motor) TA42 series D E 2.0 0.0 4.0 6.0 8.0 10.0 12.0 14.0 0 20001000 3000 4000 5000 6000 Speed (mm/s) Speed vs. Load Load (N) D E 1.6 0.0 1.0 1.2 1.6 2.0 1.4 1.2 1.8 1.4 1.8 0 400200 800600 12001000 1400 1600 Current (A) Current vs. Load Load (N)

Version: 20220313-F Load and Speed See page 2 See page 2 See page 5 Voltage IP Rating Connector See page 6 Output Signals Functions for Limit Switches See page 6 Color Special Functions for Spindle Sub- Assembly Direction of Rear Attachment (Counterclockwise) See page 6 2 = 24V DC 5 = 24V DC, PTC 1 = Without 1 = DIN 6P , 90° plug 2 = Tinned leads 0 = Without 1 = Black + 428C retaining ring 2 = Pantone 428C + 428C retaining ring 0 = Without 2 = Push only 1 = 0° 3 = 90° Stroke (mm) Retracted Length (mm) Cable Length (mm) 0 = Straight, 100 1 = Straight, 500 2 = Straight, 750 3 = Straight, 1000 4 = Straight, 1250 5 = Straight, 1500 6 = Straight, 2000 7 = Curly, 200 8 = Curly, 400 Rear Attachment (mm) See page 5 Front Attachment (mm) See page 5 N = Plastic, U clevis, one piece, slot 6, depth 13, hole 10 E = Aluminum casting, U clevis, slot 5.2, depth 12.2, hole 6.2 G = Aluminum casting, U clevis, slot 5.2, depth 12.2, hole 8.2 N = Plastic, U clevis, slot 7, depth 20, hole 10 E = Aluminum casting, U clevis, slot 5.2, depth 12.2, hole 6.2 G = Aluminum casting, U clevis, slot 5.2, depth 12.2, hole 8.2 1 = Two switches at full retracted / extended positions to cut current 3 = Two switches at full retracted / extended positions to send signal P = Molex 8P , without anti-clip, 90° plug

  1. Calculate A+B = Y 2. Retracted length needs to ≥ Stroke+Y Retracted Length (mm) Front Attach. Rear Attach. E,G N E,G +100 +98 N +117 +115 B. Stroke (mm) 25~200 - Rear Attachment (mm) Front Attachment (mm) N = Plastic, U clevis, one piece, slot 6, depth 13, hole 10 E = Aluminum casting, U clevis, slot 5.2, depth 12.2, hole 6.2 G = Aluminum casting, U clevis, slot 5.2, depth 12.2, hole 8.2 ø20 12.2 ø15.7 4.5 5.2 6.2 ø19 ø20 12.2 ø15.7 4.5 5.2 8.2 ø19 N = Plastic, U clevis, slot 7, depth 20, hole 10 E = Aluminum casting, U clevis, slot 5.2, depth 12.2, hole 6.2 G = Aluminum casting, U clevis, slot 5.2, depth 12.2, hole 8.2 30.7 8.513.7 12.2 5.2 ø10.9 ø8.2 ø17 30.7 8.513.7 12.2 5.2 ø10.9 ø6.2 ø17 R12.4 ø7 .2 ø9.9 M15*1 .25P 24.825.8 ø10

1 = 0° 3 = 90° Direction of Rear Attachment (Counterclockwise) Terms of Use The user is responsible for determining the suitability of TiMOTION products for a specific application. TiMOTION products are subject to change without prior notice. Functions for Limit Switches Wire Definitions CODE Pin 1 (Green) 2 (Red) 3 (White) 4 (Black) 5 (Yellow) 6 (Blue) 1 extend (VDC+) N/A N/A N/A retract (VDC+) N/A 3 extend (VDC+) common upper limit switch N/A retract (VDC+) lower limit switch 1 = DIN 6P , 90° plug 2 = Tinned leads P = Molex 8P , without anti-clip, 90°plug Connector Hole Hole 90º