TA37 TIMOTION | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 8
Technical content
TA37 is one of our high quality medical actuators. TA37 is recommended for the demanding force medical applications. It remains stable speed even under heavy loading. The maximum stroke of TA37 is up to 1000mm and its IP rating can support up to IP66W. The suitable medical applications for TA37 are treatment tables or patient hoist systems. General Features Max. load 12,000N (push) Max. speed at max. load 5.3mm/s Max. speed at no load 31.1mm/s Retracted length ≥ Stroke + 170mm IP rating IP66W Certificate IEC60601-1 Stroke 25~1000mm Options Hall sensors, manual release (for patient hoist) Voltage 24 / 36V DC (thermal protector) Color Black or grey Operational temperature range +5°C~+45°C Suitable for patient hoist application Product Segments
- Care Motion TA37 series
1 Please refer to the approved drawing for the final authentic value. 2 Max static pull load 4,000N, dynamic pull not allowed. 3 This self-locking force level is reached only when a short circuit is applied on the terminals of the motor. All the TiMOTION control boxes have this feature built-in. 4 The current & speed in table are tested with 24V DC motor. With a 12V DC motor, the current is approximately twice the current measured in 24V DC. With a 36V DC motor, the current is approximately two-thirds the current measured in 24V DC. Speed will be similar for all the voltages. 5 The current & speed in table are tested when the actuator is extending under push load. 6 The current & speed in table and diagram are tested with TiMOTION control boxes, and there will be around 10% tolerance depending on different models of the control box. (Under no load condition, the voltage is around 32V DC. At rated load, the voltage output will be around 24V DC) 7 Standard stroke: Min. ≥ 25mm, Max. please refer to below table. Load and Speed CODE Load (N) Self Locking Force (N) Typical Current (A) Typical Speed (mm/s) Push No Load 32V DC With Load 24V DC No Load 32V DC With Load 24V DC Motor Speed (4100RPM, duty cycle 10%) B 4000 4000 2.0 8.0 31.1 18.0 C 6000 6000 2.0 10.0 23.1 13.3 D 8000 8000 2.0 8.4 13.3 8.3 E 10000 10000 2.0 9.2 11.5 7.0 F 12000 12000 2.0 9.2 8.7 5.3 CODE Load (N) Max Stroke (mm) B 4000 1000 C 6000 900 D 8000 800 E 10000 650 F 12000 450 TA37 series Standard Dimensions (mm) Drawing 110.7 Retracted Length ø26 5038 32.937 .4 99.8 32.9 99.8 191 .4
Motor Speed (4100RPM, duty cycle 10%) Performance Data (24V DC) TA37 series 10.0 0.0 20.0 30.0 35.0 25.0 15.0 5.0 0 1000 2000 3000 4000 5000 6000 7000 8000 9000 10000 11000 12000 C B D E F Speed (mm/s) Speed vs. Load Load (N) C B D E F 2.0 0.0 4.0 6.0 8.0 12.0 10.0 3.0 1.0 5.0 7.0 9.0 11.0 0 1000 2000 3000 4000 5000 6000 7000 8000 9000 10000 11000 12000 Current (A) Current vs. Load Load (N)
Version: 20210910-L Load and Speed Voltage IP Rating Color Direction of Rear Attachment (Counterclockwise) See page 7 5 = 24V DC, thermal protector 7 = 36V DC, thermal protector 1 = Without 2 = IP54 3 = IP66 5 = IP66W 1 = Black 2 = Pantone 428C 1 = 0° 3 = 90° Stroke (mm) Retracted Length (mm) See page 2 See page 6 See page 2 Rear Attachment (mm) See page 6 Front Attachment (mm) See page 7 1 = Aluminum casting, U clevis, slot 6.2, depth 19.5, hole 10.2 2 = Aluminum casting, U clevis, slot 6.2, depth 19.5, hole 12.2 3 = Aluminum casting, U clevis, slot 8.2, depth 19.5, hole 10.2 4 = Aluminum casting, U clevis, slot 8.2, depth 19.5, hole 12.2 C = Aluminum casting, U clevis, slot 8.2, depth 19.5, hole 10.2, with plastic T-busing Cable Length (mm) Output Signals Connector See page 8 0 = Straight, 100 1 = Straight, 500 2 = Straight, 750 3 = Straight, 1000 4 = Straight, 1250 5 = Straight, 1500 6 = Straight, 2000 7 = Curly, 200 8 = Curly, 400 0 = Without 2 = Hall sensor*2 1 = DIN 6P , 90° plug 2 = Tinned leads 4 = Big 01P , plug E = Molex 8P , plug F = DIN 6P , 180° plug G = Audio plug P = Molex 8P , 90° plug, without anti-clip Functions for Limit Switches See page 8 1 = Two switches at full retracted / extended positions to cut current 2 = Two switches at full retracted / extended positions to cut current + third one in between to send signal 3 = Two switches at full retracted / extended positions to send signal 4 = Two switches at full retracted / extended positions to send signal + third one in between to send signal 5 = Two switches at full retracted / extended positions to send signal (For TC1, TC8, TC10, TC14, TC21) Special Functions for Spindle Sub- Assembly 0 = Without (standard) 1 = Safety nut 2 = Standard push only 3 = Standard push only + safety nut 1 = Punched hole on inner tube + plastic cap, without slot, hole 10.2, with plastic bush 2 = Punched hole on inner tube + plastic cap, without slot, hole 12.2 7 = Aluminum casting, U clevis, slot 6.2, depth 17.0, hole 10.2 8 = Aluminum casting, U clevis, slot 6.2, depth 17.0, hole 12.2 9 = Aluminum casting, U clevis, slot 6.2, depth 17.0, hole 10.2, with plastic T-bushing K = Aluminum casting, U clevis, slot 8.2, depth 17.0, hole 10.2 L = Aluminum casting, U clevis, slot 8.2, depth 17.0, hole 12.2 M = Aluminum casting, U clevis, slot 8.2, depth 17.0, hole 10.2, with plastic T-bushing Note 1 TA37 is designed especially for push applications, not suitable for pull applications.
TA37 Patient Hoist Ordering Key TA37 Version: 20210910-L Load and Speed Voltage IP Rating Color Direction of Rear Attachment (Counterclockwise) See page 7 5 = 24V DC, thermal protector 7 = 36V DC, thermal protector 1 = Without 2 = IP54 3 = IP66 5 = IP66W 1 = Black 2 = Pantone 428C 1 = 0° Stroke (mm) Retracted Length (mm) E = 10000N F = 12000N See page 6 See page 2 Rear Attachment (mm) See page 6 Front Attachment (mm) See page 7 C = Aluminum casting, U clevis, slot 8.2, depth 19.5, hole 10.2, with plastic T-busing Cable Length (mm) Output Signals Connector See page 8 1 = Straight, 500 2 = Straight, 750 3 = Straight, 1000 4 = Straight, 1250 5 = Straight, 1500 6 = Straight, 2000 0 = Without 1 = DIN 6P , 90° plug F = DIN 6P , 180° plug G = Audio plug Functions for Limit Switches See page 8 1 = Two switches at full retracted / extended positions to cut current Special Functions for Spindle Sub- Assembly Emergency Release Function 6 = Mechanical push only + safety nut 5 = Manual release F = Aluminum casting, U clevis, slot 8.2, depth 17.0, hole 10.2, with plastic T-bushing, for Manual Release Note 1 TA37 is designed especially for push applications, not suitable for pull applications.
- Calculate A+B = Y 2. Retracted length needs to ≥ Stroke + Y Retracted Length (mm) 288.2 27 .5 R14 ø10.2 19.5 Rear Attachment (mm) 1 = Aluminum casting, U clevis, slot 6.2, depth 19.5, hole 10.2 2 = Aluminum casting, U clevis, slot 6.2, depth 19.5, hole 12.2 3 = Aluminum casting, U clevis, slot 8.2, depth 19.5, hole 10.2 4 = Aluminum casting, U clevis, slot 8.2, depth 19.5, hole 12.2 C = Aluminum casting, U clevis, slot 8.2, depth 19.5, hole 10.2, with plastic T-busing 286.2 27 .1 R14 ø10.2 19.5 286.2 27 .1 R14 ø12.2 19.5 288.2 27 .1 R14 ø10.2 19.5 288.2 27 .1 R14 ø12.2 19.5 Front Attach. General For Patient Hoist 1, 2 170 - F - 267 Stroke (mm) Load (N) General Patient Hoist= 4000 = 6000 = 8000 = 10000 = 12000 251~300 +5 +10 +15 +20 +25 +5 301~350 +10 +15 +20 +25 +30 +10 351~400 +15 +20 +25 +30 +35 +15 401~450 +20 +25 +30 +35 +40 +20 451~500 +25 +30 +35 +40 +45 +25 501~550 +30 +35 +40 +45 +50 +30 551~600 +35 +40 +45 +50 +55 +35 601~650 +40 +45 +50 +55 +60 +40 651~700 +45 +50 +55 +60 +65 +45 701~750 +50 +55 +60 +65 +70 +50 751~800 +55 +60 +65 +70 +75 +55 801~850 +60 +65 +70 +75 +80 +60 851~900 +65 +70 +75 +80 +85 +65 901~950 +70 +75 +80 +85 +90 +70 951~1000 +75 +80 +85 +90 +95 +75
1 = Punched hole on inner tube + plastic cap, without slot, hole 10.2, with plastic bush 2 = Punched hole on inner tube + plastic cap, without slot, hole 12.2 K = Aluminum casting, U clevis, slot 8.2, depth 17.0, hole 10.2 7 = Aluminum casting, U clevis, slot 6.2, depth 17.0, hole 10.2 L = Aluminum casting, U clevis, slot 8.2, depth 17.0, hole 12.2 9 = Aluminum casting, U clevis, slot 6.2, depth 17.0, hole 10.2, with plastic T-bushing Front Attachment (mm) ø26 32 ø29.7 ø10.2 ø26 32 ø29.7 ø12.2 ø26 6.2 ø10.2 25.8 ø26 ø10.2 6.2 27 .8 ø26 8.2 ø10.2 25.8 ø26 8.2 ø12.2 25.8 ø26 8.2 ø10.2 27 .8 1 = 0° 3 = 90° Direction of Rear Attachment (Counterclockwise) F = Aluminum casting, U clevis, slot 8.2, depth 17.0, hole 10.2, with plastic T-bushing, for Manual Release ø10.2 27 .5 27 .5 8.2 8 = Aluminum casting, U clevis, slot 6.2, depth 17.0, hole 12.2 M = Aluminum casting, U clevis, slot 8.2, depth 17.0, hole 10.2, with plastic T-bushing ø26 6.2 ø12.2 25.8 Hole Hole 90º
Functions for Limit Switches Wire Definitions CODE Pin 1 (Green) 2 (Red) 3 (White) 4 (Black) 5 (Yellow) 6 (Blue) 1 extend (VDC+) N/A N/A N/A retract (VDC+) N/A 2 extend (VDC+) N/A middle switch pin B middle switch pin A retract (VDC+) N/A 3 extend (VDC+) common upper limit switch N/A retract (VDC+) lower limit switch 4 extend (VDC+) common upper limit switch medium limit switch retract (VDC+) lower limit switch 5 extend (VDC+) N/A upper limit switch common retract (VDC+) lower limit switch Terms of Use The user is responsible for determining the suitability of TiMOTION products for a specific application. TiMOTION products are subject to change without prior notice. Connector 1 = DIN 6P , 90° plug 2 = Tinned leads E = Molex 8P , plug4 = Big 01P , plug F = DIN 6P , 180° plug G = Audio plug P = Molex 8P , 90° plug, without anti-clip