TA36 TIMOTION | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 10
Technical content
TA36 is one of our new generation medical actuators. It can lift up to 10000N and its IP rating is up to IP66W. The zero backlash design is stable and can be applied to various medical applications. The TA36 is suitable for operating beds or high-load patient lift systems. General Features Max. load 10,000N (push); 6,000N (pull) Max. speed at max. load 5.4mm/s Max. speed at no load 13.9mm/s Retracted length ≥ Stroke + 170mm IP rating IP66W Certificate IEC60601-1, ES60601-1, IEC60601-1-2 Stroke 25~600mm Options Hall sensors, manual release (for patient hoist) Voltage 12/24/36V DC; 24V DC (PTC) Color Black or grey Operational temperature range +5°C~+45°C at full performance Suitable for patient hoist application Product Segments
- Care Motion TA36 series
1 Please refer to the approved drawing for the final authentic value. 2 This self-locking force level is reached only when a short circuit is applied on the terminals of the motor. All the TiMOTION control boxes have this feature built-in. 3 The current & speed in table are tested when the actuator is extending under push load. 4 The current & speed in table and diagram are tested with TiMOTION control boxes, and there will be around 10% tolerance depending on different models of the control box. (Under no load condition, the voltage is around 32V DC. At rated load, the voltage output will be around 24V DC) 5 Standard stroke: Min. ≥ 25mm, Max. please refer to below table. TA36 series Standard Dimensions (mm) Drawing Load and Speed CODE Load (N) Self Locking Force (N) Typical Current (A) Typical Speed (mm/s) Push Pull No Load 32V DC With Load 24V DC No Load 32V DC With Load 24V DC Motor Speed (4300RPM long motor, Duty cycle 10%) B 6000 6000 6000 1.5 6.0 13.9 8.0 C 8000 6000 8000 1.5 7.8 11.9 7.0 D 10000 6000 10000 1.5 9.8 10.3 5.4 E 10000 6000 10000 1.5 6.0 6.0 3.9 CODE Load (N) Max Stroke (mm) C, D, E ≥ 8000 450 B = 6000 600 105 179 95.2 ø26 95.2 Retracted Length
Motor Speed (4300RPM long motor, Duty cycle 10%) Performance Data (24V DC Motor) TA36 series 0.0 10.0 20.0 30.0 5.0 15.0 25.0 40.0 35.0 0 2000 6000 100004000 80001000 5000 90003000 7000 C B D E Speed (mm/s) Speed vs. Load Load (N) C B D E 0 2000 6000 100004000 80001000 5000 90003000 7000 0.0 2.0 4.0 6.0 1.0 3.0 5.0 8.0 9.0 10.0 7.0 Current (A) Current vs. Load Load (N)
TA36 Zero Backlash Ordering Key TA36 Version: 20210317-I Load and Speed Voltage Cable Length (mm) Output Signals IP Rating Connector See page 10 Color Direction of Rear Attachment (Counterclockwise) See page 9 1 = 12V DC 2 = 24V DC 3 = 36V DC 5 = 24V DC, PTC C = 8000N E = 10000N 0 = Straight, 100 1 = Straight, 500 2 = Straight, 750 3 = Straight, 1000 4 = Straight, 1250 5 = Straight, 1500 6 = Straight, 2000 7 = Curly, 200 8 = Curly, 400 0 = Without 2 = Hall sensor*2 1 = Without 2 = IP54 3 = IP66 5 = IP66W 1 = DIN 6P , 90° plug 2 = Tinned leads 4 = Big 01P , plug E = Molex 8P , plug F = DIN 6P , 180° plug G = Audio plug P = Molex 8P , 90° plug, without anti-clip 1 = Black 2 = Pantone 428C 1 = 0° 3 = 90° Stroke (mm) Retracted Length (mm) Functions for Limit Switches See page 9 1 = Two switches at full retracted / extended positions to cut current 2 = Two switches at full retracted / extended positions to cut current + third one in between to send signal 3 = Two switches at full retracted / extended positions to send signal 4 = Two switches at full retracted / extended positions to send signal + third one in between to send signal 5 = Two switches at full retracted / extended positions to send signal (Operate with control box: TC1, TC8, TC10, TC14, TC21; compatible with hall sensors) See page 7 Rear Attachment (mm) See page 8 Special Functions for Spindle Sub- Assembly Front Attachment (mm) See page 8 1 = Aluminum casting, no slot, hole 10.0 2 = Aluminum casting, no slot, hole 12.0 5 = Aluminum casting, clevis U, slot 6.2, depth 17.0, hole 10.0 6 = Aluminum casting, clevis U, slot 6.2, depth 17.0, hole 12.0 7 = Aluminum casting, clevis U, slot 8.2, depth 17.0, hole 10.0 8 = Aluminum casting, clevis U, slot 8.2, depth 17.0, hole 12.0 0 = Without (Standard) 1 = Safety nut 1 = Aluminum CNC, no slot, hole 10.0 2 = Aluminum CNC, no slot, hole 12.0 5 = Iron CNC, clevis U, slot 6.2, depth 17.0, hole 10.0 6 = Iron CNC, clevis U, slot 6.2, depth 17.0, hole 12.0 7 = Iron CNC, clevis U, slot 8.2, depth 17.0, hole 10.0 8 = Iron CNC, clevis U, slot 8.2, depth 17.0, hole 12.0 K = Iron, rod end bearing, no slot, hole 10.0
TA36 Standard Version Ordering Key TA36 Version: 20210317-I Load and Speed Voltage Cable Length (mm) Output Signals IP Rating Connector See page 10 Color Direction of Rear Attachment (Counterclockwise) See page 9 1 = 12V DC 2 = 24V DC 3 = 36V DC 5 = 24V DC, PTC 0 = Straight, 100 1 = Straight, 500 2 = Straight, 750 3 = Straight, 1000 4 = Straight, 1250 5 = Straight, 1500 6 = Straight, 2000 7 = Curly, 200 8 = Curly, 400 0 = Without 2 = Hall sensor*2 1 = Without 2 = IP54 3 = IP66 5 = IP66W 1 = Black 2 = Pantone 428C 1 = 0° 3 = 90° Stroke (mm) Retracted Length (mm) Functions for Limit Switches See page 9 1 = Two switches at full retracted / extended positions to cut current 2 = Two switches at full retracted / extended positions to cut current + third one in between to send signal 3 = Two switches at full retracted / extended positions to send signal 4 = Two switches at full retracted / extended positions to send signal + third one in between to send signal 5 = Two switches at full retracted/extended positions to send signal (Operate with control box: TC1, TC8, TC10, TC14, TC21; compatible with hall sensors) See page 7 Rear Attachment (mm) See page 8 Special Functions for Spindle Sub- Assembly Front Attachment (mm) See page 8 C = Aluminum casting, clevis U, slot 8.2, depth 17.0, hole 10.2, with plastic T-bushing 0 = Without (Standard) 1 = Safety nut 2 = Standard push only 3 = Standard push only + safety nut B = Aluminum casting, clevis U, slot 6.2, depth 17.0, hole 12.2 C = Aluminum casting, clevis U, slot 6.2, depth 17.0, hole 10.2, with plastic T-bushing See page 2 1 = DIN 6P , 90° plug 2 = Tinned leads 4 = Big 01P , plug E = Molex 8P , plug F = DIN 6P , 180° plug G = Audio plug P = Molex 8P , 90° plug, without anti-clip
TA36 Patient Hoist Ordering Key TA36 Version: 20210317-I Load and Speed Voltage Cable Length (mm) Output Signals IP Rating Connector See page 10 Color Direction of Rear Attachment (Counterclockwise) See page 9 2 = 24V DC 5 = 24V DC, PTC 1 = Straight, 500 2 = Straight, 750 3 = Straight, 1000 4 = Straight, 1250 5 = Straight, 1500 6 = Straight, 2000 0 = Without 1 = Without 2 = IP54 3 = IP66 5 = IP66W 1 = DIN 6P , 90° plug F = DIN 6P , 180° plug G = Audio plug 1 = Black 2 = Pantone 428C 1 = 0° Stroke (mm) Retracted Length (mm) Functions for Limit Switches See page 9 1 = Two switches at full retracted / extended positions to cut current See page 7 Rear Attachment (mm) See page 8 Special Functions for Spindle Sub- Assembly Front Attachment (mm) See page 8 C = Aluminum casting, clevis U, slot 8.2, depth 17.0, hole 10.2, with plastic T-bushing 6 = Mechanical push only + safety nut F = Aluminum casting, clevis U, slot 8.2, depth 19.0, hole 10.2, T-bushing, for Manual Release See page 2
- Calculate A+B = Y 2. Retracted length needs to ≥ Stroke + Y Retracted Length (mm) A. Front Attachment CODE Patient Hoist 1, 2 +170 - 5, 6, 7, 8 +180 - B, C +182 - K +182 - F - +253 B. Load V.S. Stroke Stroke (mm) Load (N) General Patient Hoist B C D, E 25~150 - - +5 - 151~200 - +5 +10 - 201~250 +5 +10 +15 - 251~300 +10 +15 +20 +5 301~350 +15 +20 +25 +10 351~400 +20 +25 +30 +15 401~450 +25 +30 +35 +20 451~500 +30 +35 +40 +25 501~550 +35 +40 +45 +30 551~600 +40 +45 +50 +35 601~650 +45 +50 +55 +40 801~850 +65 - - - 851~900 +70 - - -
Rear Attachment (mm) 1 = Aluminum casting, no slot, hole 10.0 2 = Aluminum casting, no slot, hole 12.0 5 = Aluminum casting, clevis U, slot 6.2, depth 17.0, hole 10.0 6 = Aluminum casting, clevis U, slot 6.2, depth 17.0, hole 12.0 7 = Aluminum casting, clevis U, slot 8.2, depth 17.0, hole 10.0 8 = Aluminum casting, clevis U, slot 8.2, depth 17.0, hole 12.0 C = Aluminum casting, clevis U, slot 8.2, depth 17.0, hole 10.2, T bush 1 = Aluminum CNC, no slot, hole 10.0 2 = Aluminum CNC, no slot, hole 12.0 8 = Iron CNC, clevis U, slot 8.2, depth 17.0, hole 12.0 5 = Iron CNC, clevis U, slot 6.2, depth 17.0, hole 10.0 B = Aluminum casting, clevis U, slot 6.2, depth 17.0, hole 12.2 6 = Iron CNC, clevis U, slot 6.2, depth 17.0, hole 12.0 7 = Iron CNC, clevis U, slot 8.2, depth 17.0, hole 10.0 Front Attachment (mm) R1415.4 2827 .1 ø10 R1415.4 ø10 8.2 27 .1 R1415.4 ø12 8.2 27 .1 R1415.4 2827 .1 ø12 R1415.4 ø10 6.2 27 .1 R1415.4 ø12 6.2 27 .1 ø26 ø10 15.5 12 15 ø26 ø12 15.5 12 15 ø26 ø10 6.2 1911 18 ø26 ø12 8.2 1911 18 ø26 ø10 8.2 1911 18 ø26 ø12 6.2 1911 18 C = Aluminum casting, clevis U, slot 6.2, depth 17.0, hole 10.2, with plastic T-bushing R1415.4 ø10.2 8.2 27 .1 ø26 6.2 ø12.2 25.8 ø26 6.2 ø10.2 27 .8
1 = 0° 3 = 90° Direction of Rear Attachment (Counterclockwise) Functions for Limit Switches Wire Definitions CODE Pin 1 (Green) 2 (Red) 3 (White) 4 (Black) 5 (Yellow) 6 (Blue) 1 extend (VDC+) N/A N/A N/A retract (VDC+) N/A 2 extend (VDC+) N/A middle switch pin B middle switch pin A retract (VDC+) N/A 3 extend (VDC+) common upper limit switch N/A retract (VDC+) lower limit switch 4 extend (VDC+) common upper limit switch medium limit switch retract (VDC+) lower limit switch 5 extend (VDC+) N/A upper limit switch common retract (VDC+) lower limit switch Front Attachment (mm) ø27 ø10 1427 13.5 23 15 ø10.2 27 .5 25.97 27 .5 8.2 K = Iron, rod end bearing, no slot, hole 10.0 F = Aluminum casting, clevis U, slot 8.2, depth 19.0, hole 10.2, T-bushing, for Manual Release Hole Hole 90º
1 = DIN 6P , 90° plug 2 = Tinned leads 4 = Big 01P , plug Connector Terms of Use The user is responsible for determining the suitability of TiMOTION products for a specific application. TiMOTION products are subject to change without prior notice. E = Molex 8P , plug F = DIN 6P , 180° plug G = Audio plug P = Molex 8P , 90° plug, without anti-clip