TA2P TIMOTION | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
- Auto Motion TA2P is also one of the Auto Motion series products. With bigger size of motor, compared to TA2, it loads uppermost up to 200KG. The typical application of TA2P is mower, wax machine, and other industrial equipment…etc. General Features Voltage of motor 12V DC, 24V DC, 36V DC, or 48VDC Maximum load 2,000N in pull/push Maximum speed 55mm/s Minimum installation dimension stroke+108mm Color silver Certificate IEC60601-1 compliant Options potentiometer, optical, Hall/Reed sensor
CODE Rated Load Max. Current at Full Load (12V) Typical Current at Rated Load (A) Typical Speed PUSH N PULL N No Load (24V DC) mm/s Rated Load (24V DC) mm/s Motor Speed (5200RPM) A 250 250 4.4 2.2 43 36 B 500 500 4.4 2.2 28 24 C 1000 1000 4.4 2.2 14 12 D 1500 1500 4.4 2.2 9.3 8 E 2000 2000 4.4 2.2 7 6 Motor Speed (6600RPM) F 250 250 5.6 2.8 55 46 G 500 500 5.6 2.8 35 30 H 1000 1000 5.6 2.8 18 15 K 1500 1500 5.6 2.8 12 10.3 L 2000 2000 5.6 2.8 9 7.5 Note
1 The left diagram shows the
speed and current figures under pushing condition.
2 Speed would be the same if
with 12V motor, but with double current consumption comparing 24V motor. Terms of Use The user is responsible for determining the suitability of TiMOTION products for a specific application. Due to continuous development in order to improve our products, TiMOTION products are subject to frequent modifications and changes without prior notice. TiMOTION reserves the right to discontinue the sale of any products displayed on its website or listed in its catalogue or other written materials drawn up by TiMOTION. TA2P series Dimension with POT, Optical, or Reed Sensor Dimension Without Sensor or with Hall Sensor(s) Drawing 33.3 ø20 ø40 R9 11 ø45 123.4 91.4 Retracted Length 33.3 ø20 ø40 R9 11 ø45 152.9 91.4 Retracted Length
TA2P Minimum Retracted Length Stroke Output Signals (#0, #4, #5) Output Signals (#1, #2, #3) for Front Attachment 1,2 with Rear Attachment 1,2,3 25~50mm Stroke+108mm Stroke+138mm51~100mm 101~150mm 151~200mm Stroke+110mm Stroke+140mm201~250mm 251~300mm Stroke Output Signals (#0, #4, #5) Output Signals (#1, #2, #3) for Front Attachment 3,4,5 with Rear Attachment 1,2,3 25~50mm Stroke+120mm Stroke+150mm51~100mm 101~150mm 151~200mm Stroke+122mm Stroke+152mm201~250mm 251~300mm
Voltage 1 = 12V 2 = 24V 3 = 36V 4 = 48V See appendixLoad and Speed Stroke Output Signals 1 = TiMOTION’s standard plug 2 = Tinned leads A = Customized 1 = Straight, 300mm 2 = Straight, 600mm 3 = Straight, 1000mm A = Customized Plug 1 = 90° (standard) Retracted Length Front Attachment Rear Attachment Functions for Limit Switches Direction of Rear Attachment 1 = Two switches at the retracted/extended positions to cut current 2 = Two switches at the retracted/extended positions to cut current with the third one in between to send signal 3 = Two switches at the retracted/extended positions to send signal 4 = Two switches at the retracted/ extended positions and the third one in between to send signal A = Customized 0 = Without 1 = Potentiometer Cable Length 2 = Optical 3 = Reed 4 = One Hall sensor 5 = Two Hall sensors Version: 20130204-F See appendix 1 = Hole 6.4mm 2 = Hole 8mm 3 = Hole 10mm A = Customized 1 = Hole 6.4mm 2 = Hole 8mm 3 = U clevis, slot 6mm, hole 10mm 4 = U clevis, slot 6mm, hole 6.4mm 5 = U clevis, slot 6mm, hole 8mm A = Customized