TA26 TIMOTION | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 6
Technical content
TiMOTION’s TA26 series electric linear actuator is designed for furniture applications such as recliners or lift chairs. This linear actuator is designed to function as a direct cut system, eliminating the need for a control box, offering a straightforward and cost effective alternative to complex electric actuation s ystems. General Features Max. load ,000N (push); 2,000N (pull) Max. speed at max. load .1mm/s Max. speed at no load 4mm/s Retracted length ≥ St roke + 120mm Certificate UL962 Output signals H all sensor(s) Voltage 2/24V DC; 24V DC (PTC) Color Black Operational temperature range + 5°C~+45°C Product Segments
- Comfort Motion TA26 series
1 Please refer to the approved drawing for the final authentic value. 2 This self-locking force level is reached only when a short circuit is applied on the terminals of the motor. All the TiMOTION control boxes have this feature built-in.
3 Operational temperature range: -25°C~+65°C
4 The current & speed in table are tested with 24V DC motor. With a 12V DC motor, the current is approximately twice the current measured in 24V DC; speed will be similar for both voltages. 5 The current & speed in table are tested when the actuator is extending under push load. 6 The current & speed in table and diagram are tested with TiMOTION control boxes, and there will be around 10% tolerance depending on different models of the control box. (Under no load condition, the voltage is around 32V DC. At rated load, the voltage output will be around 24V DC) 7 The current & speed in table and diagram are tested with a stable 24V DC power supply. Load and Speed CODE Load (N) Self Locking Force (N) Typical Current (A) Typical Speed (mm/s) Push Pull No Load 32V DC With Load 24V DC No Load 32V DC With Load 24V DC Motor Speed (3800RPM, duty cycle 10%) A 4000 2000 3000 4000 1.0 5.0 12.0 6.1 B 3000 2000 500 2500 1.0 4.5 18.0 7.5 C 2000 2000 350 1500 1.0 4.0 24.0 12.8 TA26 series Standard Dimensions (mm) Drawing 73.8 ø22 148 Retracted length 73.8
Motor Speed (3800RPM) Performance Data (24V DC Motor) TA26 series 0.0 0 2000 40001000500 1500 2500 35003000 5.0 10.0 15.0 20.0 25.0 30.0 A B C 0.0 Speed (mm/s) Speed vs. Load Load (N) 0.0 0 2000 40001000500 1500 2500 35003000 1.0 2.0 3.0 4.0 5.0 6.0 A B C 0.0 Current (A) Current vs. Load Load (N)
Version: 20220712-D Load and Speed Voltage Cable Length (mm) Output Signals 1 = 12V 2 = 24V 5 = 24V, PTC 0 = Straight, 100 1 = Straight, 500 2 = Straight, 750 3 = Straight, 1000 4 = Straight, 1250 5 = Straight, 1500 6 = Straight, 2000 7 = Curly, 200 8 = Curly, 400 K = Direct cut operation with single actuator. See page 6 L = Direct cut operation with two actuators. See page 6 0 = Without 1 = Hall sensor * 1 2 = Hall sensor * 2 Connector See page 6 1 = DIN 6P , 90° plug 2 = Tinned leads 3 = Small 01P , plug P = Molex 8P , 90° plug, without anti-clip K = 1 motor direct cut system J = 1 motor direct cut system, with anti-pull cover L = 1+1, 2 motors direct cut system S = 1+1, 2 motors direct cut system, with anti-pull cover Stroke (mm) Retracted Length (mm) Functions for Limit Switches See page 6 1 = Two switches at full retracted / extended positions to cut current 2 = Two switches at full retracted / extended positions to cut current + 3rd LS to send signal 3 = Two switches at full retracted / extended positions to send signal 4 = Two switches at full retracted / extended positions to send signal + 3rd LS to send signal See page 2 See page 5 See page 5 Rear Attachment (mm) See page 5 Special Functions for Spindle Sub- Assembly Front Attachment (mm) See page 5 1 = Plastic, clevis U, slot 6.2, depth 16.0, hole 10.2 0 = Without 1 = Plastic, no slot, hole 8.2 2 = Plastic, no slot, hole 10.2 3 = Aluminum casting, clevis U, slot 6.2, depth 17.0, hole 8.2 4 = Aluminum casting, clevis U, slot 6.2, depth 17.0, hole 10.2
- Calculate A+B = Y 2. Retracted length needs to ≥ Stroke + Y Retracted Length (mm) B. Stroke (mm) 0~150 - 151~200 - 201~250 +5 251~300 +10 301~350 +15 351~400 +20 A. Front Attach. 1, 2 +120 3, 4 +150 Note 1 For stroke over 200mm, +5mm for each increment of 50mm stroke . Rear Attachment (mm) 1 = Plastic, clevis U, slot 6.2, depth 16.0, hole 10.2 Front Attachment (mm) 1 = Plastic, no slot, hole 8.2 2 = Plastic, no slot, hole 10.2 3 = Aluminum casting, clevis U, slot 6.2, depth 17.0, hole 8.2 4 = Aluminum casting, clevis U, slot 6.2, depth 17.0, hole 10.2 6.2 ø22 ø8.2 6.2 ø22 ø10.2 ø22 ø22 ø8.2 ø22 ø22 ø10.2 ø10.2 6.216
The user is responsible for determining the suitability of TiMOTION products for a specific application. TiMOTION products are subject to change without prior notice. Functions for Limit Switches Wire Definitions CODE Pin 1 (Green) 2 (Red) 3 (White) 4 (Black) 5 (Yellow) 6 (Blue) 1 extend (VDC+) N/A N/A N/A retract (VDC+) N/A 2 extend (VDC+) N/A middle switch pin B middle switch pin A retract (VDC+) N/A 3 extend (VDC+) common upper limit switch N/A retract (VDC+) lower limit switch 4 extend (VDC+) common upper limit switch medium limit switch retract (VDC+) lower limit switch Connector 1 = DIN 6P , 90° plug 3 = Small 01P , plug2 = Tinned leads P = Molex 8P , 90° plug, without anti-clip K = 1 motor direct cut system J = 1 motor direct cut system, with anti-pull cover L = 1+1, 2 motors direct cut system S = 1+1, 2 motors direct cut system, with anti-pull cover TP TH TP TH TP TH motor 2 TP TH motor 2