TA25

TA25 TIMOTION | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 7

Technical content

TiMOTION’s TA25 series electric linear actuator uses a linear slide to move a load, instead of an extension tube. This linear slide mechanism allows for a significantly shorter retracted length and makes the TA25 a great solution for various furniture applications. The TA25 is designed to function as a direct cut system, eliminating the need for a control box, offering a simple and economical solution. Available options are Hall sensors and a special L-shaped mounting bracket. General Features Max. load 1,000N (push / pull) Max. speed at max. load 29mm/s Max. speed at no load 54mm/s Retracted length ≥ 99mm Certificate UL962 Output signals Hall sensor(s) Voltage 12 / 24V DC Operational temperature range +5°C~+45°C Product Segments

• Comfort Motion TA25 series

CODE Load (N) Self Locking Force (N) Typical Current (A) Typical Speed (mm/s) Push Pull No Load 32V DC With Load 24V DC No Load 32V DC With Load 24V DC Motor Speed (3800RPM, duty cycle 10%) B 1000 1000 100 1.3 4.5 54.0 29.0 TA25 series Standard Dimensions (mm) Drawing Note 1 Please refer to the approved drawing for the final authentic value. 2 This self-locking force level is reached only when a short circuit is applied on the terminals of the motor. All the TiMOTION control boxes have this feature built-in.

3 Operational temperature range: -25°C~+65°C

4 The current & speed in table are tested with 24V DC motor. With a 12V DC motor, the current is approximately twice the current measured in 24V DC. With a 36V DC motor, the current is approximately two-thirds the current measured in 24V DC. With a 48V DC motor, the current is approximately half the current measured in 24V DC. Speed will be similar for all the voltages. 5 The current & speed in table are tested when the actuator is extending under push load. 6 The current & speed in table and diagram are tested with TiMOTION control boxes, and there will be around 10% tolerance depending on different models of the control box. (Under no load condition, the voltage is around 32V DC. At rated load, the voltage output will be around 24V DC) 7 The current & speed in table and diagram are tested with a stable 24V DC power supply. 148 73.8 3540 35 30 Stroke Retracted length 73.8

B 0 200 400 600 800 1000 B 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 2000 400 600 800 1000 Motor Speed (3800RPM, duty cycle 10%) Performance Data (24V DC Motor) TA25 series Speed vs. Load Load (N) Current vs. Load Load (N) Speed (mm/s)Current (A)

Version: 20220712-E Load and Speed Voltage Output Signals IP Rating 1 = 12V 2 = 24V Cable Length (mm) 0 = Straight, 100 1 = Straight, 500 2 = Straight, 750 3 = Straight, 1000 4 = Straight, 1250 5 = Straight, 1500 6 = Straight, 2000 7 = Curly, 200 8 = Curly, 400 K = 1 motor direct cut system. See page 7 L = 1+1, 2 motors direct cut system. See page 7 0 = Without 2 = Hall sensors * 2 1 = Without Connector See page 6 1 = DIN 6P , 90°plug 2 = Tinned leads 3 = Small 01P , plug P = Molex 8P , 90°plug, without anti-clip K = 1 motor direct cut system J = 1 motor direct cut system, with anti-pull cover L = 1+1, 2 motors direct cut system S = 1+1, 2 motors direct cut system, with anti-pull cover Stroke (mm) Retracted Length (mm) Functions for Limit Switches See page 6 1 = Two switches at full retracted / extended positions to cut current 2 = Two switches at full retracted / extended positions to cut current + third one in between to send signal 3 = Two switches at full retracted / extended positions to send signal 4 = Two switches at full retracted / extended positions to send signal + third one in between to send signal See page 2 See page 5 Bracket See page 5 0 = Without 1 = Style A: Iron bracket 2 = Style B: Plastic bracket 122 = Bracket on the front & rear end #0 122 = Bracket on the front & rear end #1 099 = Bracket on the front & rear end #2

Minimum Retracted Length Is According To Bracket On The Front & Rear End (Mm) Bracket On The Front & Rear End Minimum Retracted Length (mm) 0 122 1 122 2 99 0 = Without 1 = Style A: Iron bracket 2 = Style B: Plastic bracket X = Rear attachment dimensions (mm) Stroke Retracted length X Stroke Retracted length X Stroke Retracted length ø10.2 6.2

Functions for Limit Switches Wire Definitions CODE Pin 1 (Green) 2 (Red) 3 (White) 4 (Black) 5 (Yellow) 6 (Blue) 1 extend (VDC+) N/A N/A N/A retract (VDC+) N/A 2 extend (VDC+) N/A middle switch pin B middle switch pin A retract (VDC+) N/A 3 extend (VDC+) common upper limit switch N/A retract (VDC+) lower limit switch 4 extend (VDC+) common upper limit switch medium limit switch retract (VDC+) lower limit switch Connector 1 = DIN 6P , 90° plug P = Molex 8P , 90°plug, without anti-clip 2 = Tinned leads 3 = Small 01P , plug K = 1 motor direct cut system J = 1 motor direct cut system, with anti-pull cover L = 1+1, 2 motors direct cut system S = 1+1, 2 motors direct cut system, with anti-pull cover TP TH TP TH TP TH motor 2 TP TH motor 2

The user is responsible for determining the suitability of TiMOTION products for a specific application. TiMOTION products are subject to change without prior notice. Cable Length (mm) K = 1 motor direct cut system L = 1+1, 2 motors direct cut system TP TH 100 TP TH motor 2 200 100