TA201 IVO | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
Tachometer for two rotation speeds and velocity – Display 6-digits – Connection: Two one-channel digital sensors or – potential-free contacts Ratio display – Impulse evaluation programmable – Input F1 with phase evaluation – Period duration measurement – Technical data - electrical ratings Voltage supply 115/230 VAC ±10 % (50/60 Hz) 24/48 VAC ±10 % (50/60 Hz)
24 VDC ±10 %
Power consumption 7 VA, 5 W Sensor supply 12...26 VDC / max. 100 mA Display LED, 7-segment display Number of digits 6-digits Digit height 14 mm Unit displayed 1/s, 1/min, 1/h programmable Function Tachometer for 2 measured values and calculator function Measuring principle Period duration measurement Calculating functions Difference F1-F2 Ratio F1:F2 Stretch-/shrinking (F2-F1):F1 Flow Pulse rate measurement Signal inputs Comparator inputs Input logic NPN / PNP Control inputs 2 Inputs Control functions Start, Stop Counting frequency F1: 10 kHz / F2: 25 Hz, 40 kHz Data memory >10 years in EEPROM Standard DIN EN 61010-1 Protection class II Overvoltage category II Pollution degree 2 Emitted interference DIN EN 61000-6-3 Interference immunity DIN EN 61000-6-2 Programmable parameters Assignment F1, F2 or F3 Calculating functions Count frequency Approvals UL/cUL, CE conform TA201 Technical data - mechanical design Operating temperature 0...+50 °C Storing temperature -20...+70 °C Relative humidity 80 % non-condensing E-connection Plug-in screw terminals Core cross-section 1.5 mm² Protection DIN EN 60529 IP 65 face with seal Operation / keypad Membrane with softkeys Housing type Housing for control panel installation Dimensions W x H x L 96 x 48 x 124 mm Cutout dimensions 93 x 45 mm (+0.6) Installation depth 123.75 mm Mounting Front panel installation by clip frame Weight approx. 350 g (AC), 250 g (DC) Material Housing: Makrolon 6485 (PC) Rotation speed ratio display Large 14 mm display LED, 6-digits, programmable Two tachos to capture and display for example rotation speed and velocity by “F1” and “F2” as well as an operator- programmed calculating function that can be selected and displayed by “F3”. The calculating function may be used for example to evaluate ratio, difference, stretching/shrinking, flow, time elapsed with start and stop signal, impulse rate measurement, period or impulse duraction.
Description
www.baumerivo.com www.baumerivo.com Tachometer electronic www.baumerivo.com 2 Subject to modification in technic and design. Errors and omissions excepted.30/10/2008 TA201 Part number TA201.00 AXA1 Voltage supply 1 24 / 48 VAC 2 115 / 230 VAC 3 24 VDC Rotation speed ratio display Large 14 mm display LED, 6-digits, programmable Comparator input Input circuit Inputs PNP- / NPN-logic Input level Programmable Input level Low 0...2 VDC Input level High 3...40 VDC Input resistance 3 kΩ Trigger level F1 A F1 B F2 Start Stop A 90° B Measuring value F1 Measuring value F2 Measuring value F3 Ratio F1 : F2 Difference F1 – F2 Stretching Shrinking Run time (measuring value 1 not active) Time (measuring value 2 not active) Signal Sensor supply Voltage supply Block circuit diagram Dimensions 109 123.75 19.75 1-10 Stop F2 Start F1 B F1 A +24V Signal Sensor supply max. 250 V terminal - terminal / - terminal Supply voltage 123456789 Connection diagram