N214 IVO | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
Totalizer and position display – Display 6-digits – Set value, scaling factor, momentary signal duration – and operating mode programmable Connection: Incremental encoder or digital sensors – Interface RS232, RS422, RS485 – Technical data - electrical ratings Voltage supply 115/230 VAC ±10 % (50/60 Hz) 24/48 VAC ±10 % (50/60 Hz) 12...30 VDC Power consumption 7 VA, 5 W Sensor supply 12...26 VDC / max. 100 mA Display LED, 7-segment display Number of digits 6-digits Digit height 14 mm Function Totalizer Difference counter A - B Parallel counter A + B Position display Count modes Adding or subtracting A-B (difference counting) A+B total (parallel counting) Up/Down A 90° B phase evaluation Counting frequency 3 Hz, 25 Hz, 10 kHz programmable Measuring range -99 999...+999 999 Data memory >10 years in EEPROM Reset Button and electric Keylock Yes, electric (keylock) Outputs electronic Optocoupler Outputs relay Potential-free change-over contact Interfaces RS232, RS422, RS485 Standard DIN EN 61010-1 Protection class II Overvoltage category II Pollution degree 2 Emitted interference DIN EN 61000-6-3 Interference immunity DIN EN 61000-6-2 N 214 Technical data - mechanical design Operating temperature 0...+50 °C Storing temperature -20...+70 °C Relative humidity 80 % non-condensing E-connection Plug-in screw terminals Core cross-section 1.5 mm² Protection DIN EN 60529 IP 65 face with seal Operation / keypad Membrane with softkeys Housing type Built-in housing Dimensions W x H x L 96 x 48 x 124 mm Installation depth 124 mm Mounting Clip frame Cutout dimensions 92 x 45 mm (+0.6) Materials Housing: Makrolon 6485 (PC) Keypad: Polyester Weight approx. 350 g (AC), 250 g (DC) Large impulse counters and position displays Display LED, 6-digits, programmable Technical data - electrical ratings Programmable parameters Decimal point Sensor logic, scaling factor Count mode, measuring units Approvals UL/cUL, CE conform
www.baumerivo.com www.baumerivo.com Totalizers electronic www.baumerivo.com 2 Subject to modification in technic and design. Errors and omissions excepted.30/10/2008 N 214 Part number N 214. AX01 Voltage supply 1 24 / 48 VAC 2 115 / 230 VAC 3 24 VDC Outputs
0 Without relay
1 Relay and optocoupler outputs
0 Without interface
1 RS485
2 RS422
3 RS232
Large impulse counters and position displays Display LED, 6-digits, programmable Comparator inputs Input circuit Inputs PNP- / NPN-logic Input level Programmable Input level Low 0...2 VDC Input level High 3...40 VDC Input resistance 3 kΩ Relay output Output circuit Switching voltage max. 250 VAC / 110 VDC Switching current max. 1 A Switching capacity max. 150 VA / 30 W Relay responding time 5 ms Electronic output Output circuit Optocoupler not short-circuit proof Switching voltage max. 40 V Switching current max. 15 mA Trigger level Voltage supply Signal input Reset Stop/Hold A B Totalizer with start count scaling factor A 90° B Output SC- / 0 SC- / 0 Sensor supply T,R- T,R+ Interface RS422 Interface RS485 Interface RS232 TxD+ TxD- RxD+ RxD- TxD RxD GND Output Block circuit diagram Dimensions 109 123.75 19.75 1-10 SC- / 0 Output SC- / 0 Output Stop Reset Count Sensor supply Track A Track B +24V 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 RxD- RxD+ TxD- TxD+ GND RxD TxD RS422 RS232 max. 250V terminal - terminal / - terminal RS485 T,R+ T,R- Supply voltage 15 14 13 12 11 10 98 76 54 32 1 Connection diagram