TA2 TIMOTION | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 10
Technical content
TiMOTION's TA2 series linear actuator is compact, robust and capable of performing well in certain outdoor environments. This linear actuator is perfect for use in small spaces where force or capability cannot be sacrificed. Options include feedback sensors, signal sending limit switches and 90 degree clevis mounting. General Features Max. load 1,000N (push/pull) Max. speed at max. load 7.6mm/s Max. speed at no load 67.5mm/s Retracted length ≥ Stroke + 105mm (without output signals) IP rating IP66M Certificate EMC Stroke 20~1000mm Output signals Mechanical pot., embedded reed switch, NPN Hall sensor, Adjustable Reed switch Voltage 12/24/36/48V DC; 12/24/36/48V DC (PTC) Color Silver Operational temperature range +5˚C~+45˚C (Load < 500N); -25˚C~+65˚C (Load ≥ 500N) Operational temperature range +5°C~+45°C at full performance Product Segments
- Industrial Motion TA2 series
(mm) Dimensions with Output Signals (mm) Drawing Retracted Length ø35 ø33.2 ø20 101 Retracted Length ø35 ø33.2 ø18.8 130.5
1 Please refer to the approved drawing for the final authentic value. 2 This self-locking force level is reached only when a short circuit is applied on the terminals of the motor. All the TiMOTION control boxes have this feature built-in. 3 The current & speed in table are tested with 24V DC motor. With a 12V DC motor, the current is approximately twice the current measured in 24V DC. With a 36V DC motor, the current is approximately two-thirds the current measured in 24V DC. With a 48V DC motor, the current is approximately half the current measured in 24V DC. Speed will be similar for all the voltages. 4 The current & speed in table are tested when the actuator is extending under push load. 5 The current & speed in table and diagram are tested with a stable 24V DC power supply.
6 With load, noise level ≤ 74dBA (by TiMOTION test standard, ambient noise level ≤ 36dBA)
CODE Load (N) Self Locking Force (N) Typical Current (A) Typical Speed (mm/s) Push Pull No Load 24V DC With Load 24V DC No Load 24V DC With Load 24V DC Motor Speed (4200RPM, duty cycle 25%) A 120 120 120 0.8 1.0 44.0 33.0 B 240 240 240 0.7 1.0 22.0 16.5 C 500 500 500 0.6 0.9 11.0 8.5 D 750 750 750 0.6 0.9 7.5 6.2 E 1000 1000 1000 0.6 0.9 5.6 4.6 Motor Speed (6000RPM, duty cycle 25%) F 120 120 120 1.0 1.8 67.5 51.0 G 240 240 240 0.9 1.7 33.5 26.5 H 500 500 500 0.8 1.5 17.0 14.0 K 750 750 750 0.8 1.5 11.0 10.0 L 1000 1000 1000 0.8 1.5 9.0 7.6 CODE Load (N) Max Stroke (mm) A, B, F, G ≤ 250 1000 C, D, H, K ≤ 750 800 E, L ≤ 1000 600
Motor Speed (4200RPM, duty cycle 25%) Performance Data (24V DC) TA2 series 200 400 600 800 1000 10.0 0.0 20.0 30.0 40.0 60.0 50.0 80.0 70.0 A B C D E Speed (mm/s) Speed vs. Load Load (N) 0.0 0 200 400 600 800 1000 1.0 2.0 3.0 4.0 5.0 6.0 A B C D E Current (A) Current vs. Load Load (N)
Motor Speed (6000RPM, duty cycle 25%) Performance Data (24V DC) TA2 series 200 400 600 800 1000 10.0 0.0 20.0 30.0 40.0 60.0 50.0 80.0 70.0 F G H K L Speed (mm/s) Speed vs. Load Load (N) 0.0 0 200 400 600 800 1000 1.0 2.0 3.0 4.0 5.0 6.0 F G H K L Current (A) Current vs. Load Load (N)
Version: 20230814-V Load and Speed Voltage Cable Length (mm) Output Signal IP Rating Connector See page 10 Direction of Rear Attachment (Counterclockwise) See page 9 1 = 12V DC 2 = 24V DC 3 = 36V DC 4 = 48V DC 5 = 24V DC, PTC 6 = 12V DC, PTC 7 = 36V DC, PTC 8 = 48V DC, PTC 1 = Straight, 300 2 = Straight, 600 3 = Straight, 1000 0 = Without 1 = Mechanical pot. 3 = Embedded reed switch 8 = Adjustable Reed switch*1 9 = Adjustable Reed switch*2 N = NPN Hall sensor*2 1 = Without 2 = IP54 3 = IP66 6 = IP66M 1 = DIN 6P , 90° plug 2 = Tinned leads 1 = 90° 2 = 0° Stroke (mm) Retracted Length (mm) Functions for Limit Switches 1 = Two micro switches cut off the actuator at end of stroke (EOS) 2 = Two micro switches cut off the actuator at end of stroke + in-between third one sends signal 3 = Two micro switches send signal at end of stroke 4 = Two micro switches send signal at end of stroke + in-between third one sends signal See page 3 See page 3 See page 7 Rear Attachment (mm) See page 8 Front Attachment (mm) See page 9 1 = Aluminum, slotless, hole 6.4, one piece casting with gearbox 2 = Aluminum, slotless, hole 8.0, one piece casting with gearbox 3 = Aluminum, slotless, hole 10.0, one piece casting with gearbox 4 = Aluminum, U clevis, slot 6.0, depth 10.5, hole 6.4, one piece casting with gearbox 5 = Aluminum, U clevis, slot 6.0, depth 10.5, hole 8.0, one piece casting with gearbox 6 = Aluminum, U clevis, slot 6.0, depth 10.5, hole 10.0, one piece casting with gearbox 1 = Aluminum, slotless, hole 6.4 2 = Aluminum, slotless, hole 8.0 3 = Aluminum, U clevis, slot 6.0, depth 16.0, hole 10.0 4 = Aluminum, U clevis, slot 6.0, depth 16.0, hole 6.4 5 = Aluminum, U clevis, slot 6.0, depth 16.0, hole 8.0 6 = Aluminum, slotless, hole 10.0
- Calculate A+B+C = Y 2. Retracted length needs to ≥ Stroke + Y Retracted Length (mm) C. Output Signal CODE 0 - 1, 3, N +30 B. Stroke (mm) 20~150 - 151~200 +2 201~250 +2 251~300 +2 301~350 +12 351~400 +22 401~450 +32 451~500 +42 501~550 +52 551~600 +62 601~650 +72 651~700 +82 701~750 +92 751~800 +102 801~850 +112 851~900 +122 901~950 +132 951~1000 +142 A. Rear / Front Attachment Front Attachment Rear Attachment 1, 2, 3 4, 5, 6 1, 2, 6 +105 +109 3, 4, 5 +115 +119
Rear Attachment (mm) Voltage 1 = Aluminum, slotless, hole 6.4, one piece casting with gearbox 2 = Aluminum, slotless, hole 8.0, one piece casting with gearbox 3 = Aluminum, slotless, hole 10.0, one piece casting with gearbox 4 = Aluminum, U clevis, slot 6.0, depth 10.5, hole 6.4, one piece casting with gearbox 5 = Aluminum, U clevis, slot 6.0, depth 10.5, hole 8.0, one piece casting with gearbox 6 = Aluminum, U clevis, slot 6.0, depth 10.5, hole 10.0, one piece casting with gearbox 1818 11 ø6.4 R8.9 1818 11 ø8 R8.9 1818 11 ø10 R8.9 ø22 10.5 ø6.4 ø22 10.5 ø22 10.5 ø10 5 = 24V DC, PTC 7 = 36V DC, PTC6 = 12V DC, PTC 8 = 48V DC, PTC PTC 100 min 250 PTC 100 min 250 PTC 100 min 250 PTC 100 min 250
1 = 90° 2 = 0° Direction of Rear Attachment (Counterclockwise) 1 = Aluminum, slotless, hole 6.4 2 = Aluminum, slotless, hole 8.0 3 = Aluminum, U clevis, slot 6.0, depth 16.0, hole 10.0 4 = Aluminum, U clevis, slot 6.0, depth 16.0, hole 6.4 5 = Aluminum, U clevis, slot 6.0, depth 16.0, hole 8.0 6 = Aluminum, slotless, hole 10.0 Front Attachment (mm) ø20 ø10 ø20 ø10 ø20 ø6.4 ø20 ø6.4 ø20 ø8.0 ø20 Hole Hole 90º
The user is responsible for determining the suitability of TiMOTION products for a specific application. TiMOTION products are subject to change without prior notice. Connector 1 = DIN 6P , 90° plug 2 = Tinned leads