T622-019.44M

T504-019.44M CONNOR-WINFIELD | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

Specifications subject to change without notice. All dimensions in inches. © Copyright 2008 The Connor-Winfield Corporation Bulletin Tx176 Page 1o f4 Revision 07 Date 25 Aug 2008 21 11 Comprehensive Drive Aurora, Illinois 60505 Phone: 630-851-4722 Fax: 630- 851- 5040 www.conwin.com US Headquarters: 630-851-4722 European Headquarters: +353-61-472221

Description

Standard Frequencies Available * Ta b l e 1 . 0 Features: Pin Connections 0.276 0.006 (7.0mm) 0.197 0.006 (5.0mm) 0.079 Max. (2.0mm) T504 0702 19.44MHz 0.025(6 Places) (0.635mm) 0.100 (2.54mm) 0.040 (1.02mm) (6 Places) 0.030 (0.762mm) (4 Places) 0.100 (2.54mm) Pin 1 0.038 (0.965mm) (4 Places) Dimensional Tolerance: ±.005 (.127mm) ±.02 (.508mm) 1 23 678 Bottom View

Ordering Information

1 Do not connect

2 Do not connect

3 Do not connect

4 Ground

5 Output

6 Do not connect

7 Do not connect

8 Tri-state Enable / Disable

9 Supply, Vcc

10 Voltage Control (VCTCXO)

N/C (TCXO) 19.44 MHz 20.0 MHz 20.48 MHz 12.8 MHz 13.5 MHz 19.2 MHz 25 MHz 27 MHz 38.88 MHz * Available frequencies from the factory for small quantity orders or quick delivery. Additional frequencies are available. Telecom Performance TCXO / VCTCXO

Applications

5.0x7.0mm Temperature Compensated Crystal Controlled Oscillators and Voltage Controlled Temperature Compensated Crystal Controlled Oscillators are designed for use in S3 Telecom Applications. Through the use of Analog Temperature Compensation, this device is capable of holding sub 1-ppm stabilities over the commercial or the industrial temperature ranges. All models meet +/-4.6ppm accuracies for twenty years. Miniature 5.0 x7.0mm Surface Mount Package 3.3V Operation LVCMOS or Clipped Sinewave Output Logic Frequency Stabilities Available: T50x / T60x: +/-0.28ppm T51x / T61x: 0.50ppm T52x / T62x: 1.00ppm Temperature Ranges Available: T5xx Series: 0 to 70°C T6xx Series: -40 to 85°C Frequency Tolerance: +/-4.60ppm for 20 yrs. Low Jitter <1pS RMS Tri-State Enable/Disable Tape and Reel Packaging RoHS Compliant / Lead Free Recommended for New Designs +/- +/- Type: Precision TCXO VCTCXO 5x7mm Features: 2 = TCXO, LVCMOS, 3.3Vdc. 4=V C 5=V C TCXO, Clipped Sinewave, 3.3Vdc. TCXO, LVCMOS, 3.3Vdc. TCXO, Clipped Sinewave, 3.3Vdc. Temperature Range: 5=0t o 6 = -40 to 85 70° C Frequency Stability: 0 = +/-0.28 1 = +/- 2 = +/- ppm 0.50 ppm 1.00 ppm T 5 0 019.44M- Output Frequency: Frequency Format -xxx.xM Min.* -xxx.xxxxxxM Max.* *Amount of numbers after the decimal point. M = MHzExample: T504-019.44M = 5x7mm, TCXO, LVCMOS, 3.3Vdc, 0 to 70C, +/-0.28ppm, Output Frequency 19.44MHz To order an T504 with an output frequency of: 6.4 MHz = T504-006.4M 20 MHz = T504-020.0M 38.88 MHz = T504-038.88M

2111 Comprehensive Drive

Aurora, Illinois 60505 Phone: 630-851-4722 Fax: 630-851-5040 www.conwin.com TCXO VCTCXO 3.3V Operation LVCMOS Output Clipped Sinewave Output Frequency Stability: T50x/T60xSeries+/-0.28ppm T51x/T61x-Series+/-0.50ppm T52x/T62x-Series+/-1.00ppm T emperature Range: T5xx-Series 0 to 70°C T6xx-Series -40 to 85°C Low Jitter <1pS RMS Tri-State Enable/Disable Surface Mount Package T ape and Reel Packing RoHS Compliant / Lead Free 1 2 3 678 Vcc Supply Voltage N/C - TCXO VC- VCTCXO DNC DNC DNC DNC DNC Output 15 pF.01 uF Bypass E/D Specifications subject to change without notice. All dimensions in inches. © Copyright 2008 The Connor-Winfield Corporation LVCMOS Test Circuit

Features

Ta b l e 2 . 0 Parameter Minimum Nominal Maximum Units Notes Storage T emperature -55 - 125 °C Supply Voltage (Vcc) -0.5 - 6.0 Vdc Input Voltage (Vcc) -0.5 - Vcc+0.6 Vdc Model Specifications US Headquarters: 630-851-4722 European Headquarters: +353-61-472221 Bulletin Page Revision Date Tx176 2o f4

25 Aug 2008

Table 3.0 Model Number T502 T503 T504 T505 Notes Output Type LVCMOS Clipped Sinewave LVCMOS Clipped Sinewave TCXO / VCTCXO TCXO TCXO VCTCXO VCTCXO Frequency Range 6.4 to 40 MHz Frequency Stability ±0.28ppm 1 Supply Voltage 3.3Vdc Temperature Range 0 to 70°C Holdover Stability ±0.32ppm 2 Table 4.0 Model Number T602 T603 T604 T605 Notes Output Type LVCMOS Clipped Sinewave LVCMOS Clipped Sinewave TCXO / VCTCXO TCXO TCXO VCTCXO VCTCXO Frequency Range 6.4 to 40 MHz Frequency Stability ±0.28ppm 1 Supply Voltage 3.3Vdc Temperature Range -40 to 85°C Holdover Stability ±0.32ppm 2 Table 5.0 Model Number T512 T513 T514 T515 Notes Output Type LVCMOS Clipped Sinewave LVCMOS Clipped Sinewave TCXO / VCTCXO TCXO TCXO VCTCXO VCTCXO Frequency Range 6.4 to 40 MHz Frequency Stability ±0.50ppm 1 Supply Voltage 3.3Vdc Temperature Range 0 to 70°C Table 6.0 Model Number T612 T613 T614 T615 Notes Output Type LVCMOS Clipped Sinewave LVCMOS Clipped Sinewave TCXO / VCTCXO TCXO TCXO VCTCXO VCTCXO Frequency Range 6.4 to 40 MHz Frequency Stability ±0.50ppm 1 Supply Voltage 3.3Vdc Temperature Range -40 to 85°C Table 7.0 Model Number T522 T523 T524 T525 Notes Output Type LVCMOS Clipped Sinewave LVCMOS Clipped Sinewave TCXO / VCTCXO TCXO TCXO VCTCXO VCTCXO F r e q u e n c yR a n g e 6 . 4t o5 2M H z Frequency Stability ±1.00ppm 1 Supply Voltage 3.3Vdc Temperature Range 0 to 70°C Table 8.0 Model Number T622 T623 T624 T625 Notes Output Type LVCMOS Clipped Sinewave LVCMOS Clipped Sinewave TCXO / VCTCXO TCXO TCXO VCTCXO VCTCXO F r e q u e n c yR a n g e 6 . 4t o5 2M H z Frequency Stability ±1.00ppm 1 Supply Voltage 3.3Vdc Temperature Range -40 to 85°C Notes: 1) Frequency stability vs. change in temperature. [±(Fmax – Fmin)/2.Fo]. 2) Inclusive of frequency stability, supply voltage change (±1%), aging, for 24 hours.

Aurora, Illinois 60505 Phone: 630-851-4722 Fax: 630-851-5040 www.conwin.com 1 2 3 678 Vcc Supply Voltage Voltage Control DNC DNC DNC DNC DNC .01 uF Bypass E/D Output 10 pF10Kohm Clipped Sinewave Test Circuit Electrical Specifications for all Models TCXO VCTCXO 3.3V Operation LVCMOS Output Clipped Sinewave Output Frequency Stability: T50x/T60xSeries+/-0.28ppm T51x/T61x-Series+/-0.50ppm T52x/T62x-Series+/-1.00ppm T emperature Range: T5xx-Series 0 to 70°C T6xx-Series -40 to 85°C Low Jitter <1pS RMS Tri-State Enable/Disable Surface Mount Package T ape and Reel Packing RoHS Compliant / Lead Free Specifications subject to change without notice. All dimensions in inches. © Copyright 2008 The Connor-Winfield Corporation US Headquarters: 630-851-4722 European Headquarters: +353-61-472221 Bulletin Page Revision Date Tx176 3o f4 Notes: 1) TCXO: Initial calibration @ 25 C. Specifications at time of shipment after 48 hours of operation. 2) Frequency change after reciprocal temperature ramped over the operating range. Frequency measured before and after at 25°C. 3) Inclusive of calibration @ 25 C, frequency vs. change in temperature, change in supply voltage (±5%), load change (±5%), reflow soldering process and 20 years aging. 4) For best in application performance, careful selection of an external power source is critical. Select an external regulator that meets or exceeds the following specifications regarding voltage regulation tolerance, initial accuracy, temperature coefficient, voltage noise, and low voltage noise density. Factory Test Conditions:Initial Accuracy ±2mv, Noise (0.1Hz to 10 KHz) 15uV p-p, Voltage Noise Density = 50nV/square root of Hz, Temperature Coefficient < 5ppm per degree C. 5) Leave Pad 8 unconnected if enable / disable function is not required. When tri- stated, the output stage is disabled but the oscillator and compensation circuit are still active (current consumption < 1m A ) . 6) Additional pull ranges are available; please contact the factory for additional information. 7) Output is AC coupled. Operating Specifications Table 9.0 Parameter Minimum Nominal Maximum Units Notes TCXO Frequency Calibration @ 25 C -1.00 - 1.00 ppm 1 Supply Voltage Variation. (Vcc±5%) -0.2 - 0.2 ppm Load Coefficient, ±5pF -0.2 - 0.2 ppm Static Temperature Hysteresis -0.4 - 0.4 ppm 2 Total Frequency Tolerance -4.60 - 4.60 ppm 3 Supply Voltage (Vcc) 3.135 3.3 3.465 Vdc 4 Supply Current (Icc) - 6 10 mA Period Jitter - 3 5 ps rms Integrated Phase Jitter (BW=12kHz to 20MHz) - 0.3 1.0 ps rms SSB Phase Noise at 10Hz offset - -80 -70 dBc/Hz SSB Phase Noise at 100Hz offset - -110 -100 dBc/Hz SSB Phase Noise at 1KHz offset - -135 -130 dBc/Hz SSB Phase Noise at >10KHz offset - -150 -145 dBc/Hz SSB Phase Noise at >100KHz offset - -150 -150 dBc/Hz Start Up Time - - 10 ms Input Characteristics For Enable / Disable Function (Pad 8) Table 10.0 Parameter Minimum Nominal Maximum Units Notes Enable Voltage (High) or open circuit (Vih) 70% Vcc - - Vdc 5 Disable Voltage (Low) Output Tri-stated (Vil) - - 30% Vcc Vdc Input Characteristics For Voltage Control (Pad10) Table 11.0 Parameter Minimum Nominal Maximum Units Notes Control Voltage Range (Vcc = 3.3V) (Vc) 0.3 1.65 3.0 Vdc Frequency Tuning ±10 - - ppm 6 Linearity ±5 - - % Slope Positive LVCMOS Output Characteristics Table 12.0 Parameter Minimum Nominal Maximum Units Notes LOAD - - 15 pF Voltage (High) (Voh) 90%Vcc - - Vdc (Low) (Vol) - - 10%Vcc Vdc Current (High) (Ioh) -4 - - mA (Low) (Iol) - - 4 mA D u t y C y c l e a t 5 0 % o f V c c 4 55 05 5% Rise / Fall Time 10% to 90% - - 8 ns Clipped Sinewave Output Characteristics Table 13.0 Parameter Minimum Nominal Maximum Units Notes Load 7 Output Load Resistance - 10K - Ohms Output Load Capacitance - 10 - pF Output Voltage (< 40 MHz) 1.00 - - V pk-pk Output Voltage (> 40 MHz) 0.80 - - V pk-pk

Table 14.0 Package Ceramic Surface Mount Package. Aurora, Illinois 60505 Phone: 630-851-4722 Fax: 630-851-5040 www.conwin.com 120°C 150°C 180°C 260°C 220°C 360 Sec. Max. 120 S Max. 10 S 60 S Max. Time Temperature 260°C 90% 50% 10% 200 mV/Div Design Recommendations Tape and Reel Specifications OSC TOP LAYER GROUND LAYER BOTTOM LAYER Output Buffer

50 Ohm Trace

Model T504-019.44MHz Typical Phase Noise Solder Profile LVCMOS Output Waveform Clipped Sinewave Output Waveform Package Characteristics Environmental Characteristics Table 15.0 Vibration: Vibration per Mil Std 883E Method 2007.3 Test Condition A Shock: Mechanical Shock per Mil Std 883E Method 2002.4 Test Condition B. Soldering: SMD product suitable for Convection Reflow soldering. Peak temperature 260 C. Maximum time above 220 C, 60 seconds. Solderability Solderability per Mil Std 883E Method 2003 Suggested Pad Layout Vcc, should have a large copper area for reduced inductance. Connect a 0.01uF bypass capacitor <0.1”(2.54mm) from the pad. Ground, should have a large copper area for reduced inductance. 0.010”(0.254mm) Recommended clearance inductance for internal copper flood. Top View 1 3 Buffer Ground <1”by design Vcc Ground Top View 0.215 (5.46mm) 0.037 (0.94mm) 0.051 (1.28mm) 0.051 (1.28mm) 0.295 (7.49mm) 0.030 (0.76mm) Keep Out AreaTop View Dimensional Tolerance: ±.005 (.127mm) ±.02 (.508mm) Specifications subject to change without notice. All dimensions in inches. © Copyright 2008 The Connor-Winfield Corporation US Headquarters: 630-851-4722 European Headquarters: +353-61-472221 Bulletin Page Revision Date Tx176 4o f4