T2300 NJSEMI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

, O ne. 20 STERN AVE. SPRINGFIELD, NEW JERSEY 07081 U.S.A. TELEPHONE: (973) 376-2922 (212)227-6005 FAX: (973) 376-8960 T2300, T2301, T2302 Series 2.5-A Sensitive-Gate Silicon Triacs Modified TO-205 Package for AC Power Switching Features: 800V, 125 Dag. C Tj Operating High dvldl and di/dt Capability Low Switching Losses High Pulse Currant Capability Low Forward and Reverse Leakage S/pos Oxide Glass Multilayer Passivation System Advanced Unlsurlace Construction Precise Ion Implanted Diffusion Source TERMINAL DESIGNATIONS -OATE Modlllnd TO-205 3 mA Gate 4 mA Gate 10 m A Gate T2300F T2300A T2300B T2300O T2300M T2300N T2301F T2301A T2301B T2301D T2301M T2301N T2302F T2302A T2302B T2.302O T2302M T2302N 100 200 400 600 800 |T<HUSJ: Tc = 85'C For other conditions ITSM- For one cycle of applied principal voltage

60 Hz (sinusoidal)

50 Hz (sinusoidal)

More than one cycle of applied principal voltage di/dt: VD=VCROM, l0 = 50mA, t, = 0.1/a m [At Tc shown (or lT(nM3)]: t = 20ms = 2.S ms = 0,5 ms POM: Peak (For 1//s max.. ISTM<1 A(peak) %.== During soldering for 10 s maximum at distance 2 1/16 In. (1.58 mm) from seating plane AFor either polarity of main terminal 2 voltage (VMT!) with reference to main terminal 1. 'For either polarity of gate voltage (V0) with reference to main terminal 1.

  • For temperature measurement reference point, see Dimensional Outlines. 2.5 . . See Figs. 3,4,5 . -25- .21- . See Figs. 6,7 . 100 . 4.3 . -10- -0,15, -0.05- -4010150- . -40 to 125 - .225. A's A's A's A W W W NJ Semi-Conductors reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by NJ Semi-Conductors is believed to.be both accurate and reliable at the time of going to press. However, NJ Semi-Conductors assumes no responsibility for any errors or omissions discovered in its use. NJ Semi-Conductors encourages customers to verify that datasheets are current before placing orders. Quality Semi-Conductors

T2300, T2301, T2302 Series

ELECTRICAL CHARACTERISTICS

At Maximum Ratings Unless Otherwise Specified and at Indicated Case Temperature (Tc) CHARACTERISTIC IDROM* Gate open, Tj = 125°C, VDROM = Max- ratecl value iT=10 A(peak), TC=25°C |HO*: (See Figs. 9 & 10) Gate open. Initial principal current=150 mA (dc). vD=12 V, TC-25°C (T2300, T2301 (series) (T2302 'series) dv/dt (Commutating)4: (See Fig. 14) VD"VDROM' 'T(RMS)"2-5 A' commutating di/dt=1.33 A/ms, gate unenergized, T^= 70°O dv/dt (Off-state)4: VD=^DROM> exponential voltage rise, gate open, Tc= 115°C(T2300. T2301 series) T0 = 125°C(T2302 series) |GT**: (See Figs. 11 & 12) vD=12 V dc, RL=30 52, TC=25°C Mode VMT2 VG l+ positive positive T2300 series T2301 series T2302 series III" negative negative T2300 series T2301 series T2302 series I"" positive negative T2300 series T2301 series T2302 series III* negative positive T2300 series T2301 series T2302 series VGT4«: (See Fig. 13) vD=12Vdc, RL=30S2, TC-25°C "D=VDROM. RL=125". To*125°C tgt: (See Fig. 16) VD=VDROM- IcT160 mA' tr-0-1 fs. 'T=l° A(peak). TC-25°C RflJC: Steady-state (T2300 Series) LIMITS FOR ALL TYPES Except as Specified Min. 0.5 0.15 TVP- 0,2 1.7 3.5 3.5 1.8 Max. 0.75 2.2 2.2 2.5 8.5 150 UNITS mA V mA V/Ms V/AIS mA V o For either polarity of main terminal 2 voltage (V^-^ mt^ reference to main terminal 1. For either polarity of gate voltage LVG) with reference to main terminal 1,