T106M1 | DigiCamel IC Datasheet

Online Datasheet

Read T106M1 online.

EC103A TECCOR | Alldatasheet

Document overview

Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
PDF pages: 12

Technical content

yy < le a TO - 92 sale ai THERMOTAB Pil TO-220AB tk TO-202AB A oi K G Sensitive SCRs (0.8 — 10 Amps) General Description The Teccor Electronics, Inc. line of sensitive SCR semiconduc- Tape-and-reel packaging is available for the TO-92 package. tors are half-wave unidirectional gate-controlled rectifiers (SCR- Please consult factory for more information. thyristor) which complement Teccor's line of power SCRs. This Variations of devices covered in this data sheet are available for group of packages offers ratings of 0.8-10 amps, and 50-600 custom design applications. Please consult the factory for more volts with gate sensitivities of 12-500 microamps. If gate currents information in the 10-50 milliamp ranges are required, please consult Tec- . cor's non-sensitive SCR technical data sheets. Electrically Isolated Packages This group of Teccor sensitive SCRs is available in a choice of three different product packages. The TO-220AB and TO-92 are electrically isolated where the case or tab is internally isolated to allow the use of low cost assembly and convenient packaging techniques. Features + Electrically-isolated To-220AB package Glass Passivation + High Voltage Capability up to 600 Volts Teccor's line of SCRs features glass-passivated junctions to + High Surge Capability — up to 100 Amps ensure long term device reliability and parameter stability. Tec- + Glass Chip Passivation cor's glass offers a rugged, reliable barrier against junction con- tamination. Teccor Electronics, Inc. 54 Sensitive SCRs (972) 580-7777

Maximum | Repettive | DC Gate Peak Off-state Peak DC Gate DC Holding Onesie | Peak | Thaaer Current at Onstet Trigger Voltage Curent Su -state. | Current oliage nti mL orward& |(2) G1) 7) Vorwioy Te=25C an Orvsiate Reverse (3) (10) Current TYPE Voltage O00) =20mAmps (5) (14) KUNA (18) G TO-92 Amps Amps Volts See “Package To= To= Te= Te= To= To= | tere2 | 15 | 95 | 50 | 200 | to 80 too Ts 10 | os | 2 [50 [Teraas | 75 [95 | io | 200 | io [50 [too | as | a0 [os [ 2 | 50 | 15 [tera [15 [9s [200 | 200 To [80 [oo | is [40 | os | as | so | AMPS |" “Terz6 [15 [95 [400 [200 io [80 [too [is | io [oe | as [0 | [tere | 15 [ 95 [ 600 [200 | 20 | oo [200 [ is [ io [ os | 25 [ 50 | ‘See General Notes and Electrical Specifications Notes on page 5-4 Sensitive SCRs 5-2 Teccor Electronics, Inc. (972) 580-7777

Peak Gate] Peak Peak Gate ‘Average: Peak One Critical Rate- Maximum Gate Controlled Circuit RMS Surge Current | Reverse Power Gate Power Cycle Surge Of-Rise Of Rate-Of- Turn-On Time | Commutated | (Non-Repeti- (16) Gate Dissipation Dissipation Forward Forward Change Of Gate Pulse Turn-Off tive) On-State Voltage (16) Current Off-State On-State Current =10mA Time Current For (6) (7) (12) Voltage Igr = 50mA Min. Width (9) A Period Of With O.1us = 15us 8.3ms For Rise Time With Rise Time Fusing (8) Amps Amps Volts Watts Watts [cone | sone | Volts/wSec Amps/Sec uSec Sec Amps*/Sec [of ww [iw te me ee ee eee eee ee [10 | soo re te eo p10 | fe te LC ee pe SS See ee ele ee ee ee ee ee p10 | 66 [| io [eo | tof ot ote cot [10 [eo To oto te sos [ 10 [60 | to fot oe co ot a XO OO Lio; 60 {10 {on To te tt 8 Teccor Electronics, Inc. 5-3 Sensitive SCRs (972) 580-7777

Repetitive DC Gate Peak Peak Gate Maximum Peak Off-State DC Gate DC Holding [oF On-State On ate Bical Current at one Trigger Voltage Current ou ~ Cc it - Vv; &Y; (4) (11. Initial On-State TYPE | wrens | rears [arcrycay| You sYR | Terese (y(t) Intl Or Stato Voltage lll. TO-202AB Amps Amps Volts mAmps See “Package To= | To= To= | To= | To= Dimensions” Fyaws) |_ta\\ Volts wAmps | 25°C | 110°C] Volts | -4oec | 25°C | 10°C | 1. = 25°C Amps General Notes (7) 0.8-4.0A devices also have a pulse peak forward current on-state rating (repetitive) of 75A. This rating applies for operation at 60Hz, * Teccor 2N5060 and 2N6564 Series devices conform to all JEDEC 75°C maximum tab (or anode) lead temperature, switching from registered data, See specifications table on page 5-2 80V peak, sinusoidal current pulse width of 10jts minimum, 15,1s maximum. See Figures 5.20 and 5.21. + The case temperature (TC) is measured as shown on dimensional (@) See Figure 5.15 for te Vs ler " 5 ores snow , . ot outine drawings. See “Package Dimensions” section of this (@) Test conditions as follows: catalog. Tc < 80°C, rectangular current waveform; rate-of-rise of current + All measurements (except Igr) are made with an external resistor <10Ais. Rate-of-reversal of current < 5A/js. Iny= 1A (50s Rx = 1kQ unless otherwise noted, pulse) Repetition Rate = 60pps. Vary = Rated. Vp = 15V mini- + All measurements are made at 60Hz with a resistive load at an mum, Vu = Rated. Rate-of-rise reapplied forward blocking volt- ambient temperature of +25°C unless otherwise specified. age = 5V/jis. Gate Bias = OV, 1002. (during turn-off time interval). . 65% OF for “EC” Cari (10) Test condition is maximum rated RMS current except TO-92 Operating temperature (T,) is -85°C to + 110°C for “EC” Series devices are 1.2Apq; T106/T107 devices are 4A devices; -65°C to +125°C for “2N" Series devices; -40°C to +125°C (44) vy. _ ev, Ri, = 1000. See Figure 5.19 for simple test circuit for for "TCR" Series; and -40°C to +110°C for all others. Oring ate hi 4 4 measuring gate trigger voltage and gate trigger current + Storage temperature range (Ts) is -65°C to + 150°C for TO-92 (12) See Figures 5.1 through 5.9 for maximum allowable case temper- devices; -40°C to +150°C for TO-202 devices; and -40°C to ature at maximum rated current. 4125°C for all others. (13) Igr = 500A maximum for Tg = -40°C for T106 devices. + Lead solder temperature is a maximum of +230°C for 10 seconds (14) He fore maximum for Tc = -65°C for 2N5060 Series and 416" (1 Samm) te ries devices maximum (1.58mm) from case. (15) I,y=6mA maximum for Te =-40°C for T106 devices. ; sgtandi (16) Pulse Width < 10s. Electrical Specification Notes (17) gr = 350A maximum at Tg = -65°C for 2N5060 Series and , 2N6564 Series devices. a ire oa ton porate 5.9 for current ratings at specified operat: (4) | atching current can be higher than 20mA for higher Igr types. (2) See Figure 5.10 for ley vs To Also latching current can be much higher at ~40°C. See Figure (3) See Figure 5.11 for instantaneous on-state current (ir) vs on-state (19) Tg = Ty for test conditions in off-state voltage (vr) - (typical). (4) See Figure 5.12 for Ver vs To. (6) See Figure 5.13 for l,j vs To. (6) For more than one full cycle, see Figure 5.14. Sensitive SCRs 5-4 Teccor Electronics, Inc. (972) 580-7777

-—Crt—“‘“‘=é?z]DUC(‘CCRSDhUCUC UC éCSCSCmdrdédCdmLULl on ee te ee ee _ _ Maximum Repetitive Peak | DC Gate Peak Peak DC Gate DC Holding 6) Ola On-State Off-State Trigger | Off-State | On-State | Trigger Voltage Current TYPE | Current Forward & Current Current at Voltage (4) (11), Initial a) Reverse (2) (11) |Vorm & Varm| To = 25°C On-Siate Voltage (19) (3) (10) Current = + 20mA | (8) (17) « UUs «We a a TO.220AB TO-202AB Amps mAmps Volts mua Te=] To= To=] Te=] to= for variations. | Max | max [MIN] _max__[ max | max] wax [max | MAX | MIN | MAX | | _sosoaisz | sosoars2i [| a0 [ 51 [ 50 [ 200 | oos[ozs| 16 [10 ][o8 | 25 | 60 | [| _Sososiss__ | sososrssi_[ eo [ 51 [so | s00_ | os [ozs [ 16 | 10 | os | 25 | 60 | |__Stoosis2__ | stoosrs2i_[ 6.0 [si [too | 200 [os fozs] 16 [io fos | 2] 60 | 8.0 [7 siooatss | stooerssi_[ eo [si [7 too | 500 | 00s [ozs | 6 | io [os | 2s | a0 | Amps |"saooats2_ |" saooarsat_|~e0 [81 |" 200 | 200 | 00s [o2s | ie [to [os [25 | 60 | [| S2ooeiss_ | Szoosrssi [| 60 [ 51 [ 200 | s00 | oosfo2zs] 16 [10 [os | 25] so | | s4ooais2 | saooers2i_ | a0 [ 51 [400 [200 | oos[o2zs| i6 [10 [os | 25 [ 60 | | _S4ooaiss_ | saoosrssi_[ eo [ 51 [400 | soo | oos[o2zs[ 16 | 10 [os | 25 [| 60 | [| ssoosis2_ | Scoosrs2i_| eo | 51 [soo | 200 | oos/o2zs| is [10 [os | 25 [60 | | _seoosiss | seoosrssi_| a0 [ 51 [ 600 __[ 500 | ooso2zs[ 16 [10 [os | 2{ 80 | General Notes + Storage temperature range (Ts) is -65°C to + 150°C for TO-92 devices; -40°C to +150°C for TO-202 devices; and -40°C to * Teccor 2N5060 and 2N6564 Series devices conform to all JEDEC +125°C for all others. registered data. See specifications table on page 5-2. + Lead solder temperature is a maximum of +230°C for 10 seconds + The case temperature (TC) is measured as shown on dimensional maximum > 1/16" (1.59mm) from case. outline drawings. See “Package Dimensions" section of this catalog + All measurements (except gr) are made with an external resistor Rox = 1kQ unless otherwise noted. + All measurements are made at 60Hz with a resistive load at an ambient temperature of +25°C unless otherwise specified + Operating temperature (T,) is -65°C to + 110°C for “EC” Series devices; -65°C to +125°C for “2N" Series devices; -40°C to +125°C for ‘TCR’ Series; and -40°C to +110°C for all others. Sensitive SCRs 5-6 Teccor Electronics, Inc. (972) 580-7777

PeakGate| Peak PeakGate | Average Peak One Critical Rate- ‘Maximum ‘Gate Controlled Circuit RMS Surge Current | Reverse Power | Gate Power | Cycle Surge OfRise Of | Rate-Of-Change | Tum-OnTime | Commutated | (Non-Repetitive) (16) Gate Dissipation | Dissipation Forward Forward | Of On-State Current|Gate Pulse = 10mA} —Turn-Off On-State Voltage (16) Current Off-State Igt=50mA | Min, Width = 15s] Time Current For (6) (12) Voltage With 0.1 ps With Rise Time @) A Period Of Rise Time <0.1 us 8.3 mSec For @) Fusing Votts/Sec Amps Volts Watts Watts Amps Amps/ nSec Sec Sec Amps*Sec a a Oc A OS ee Oe Se Eee TS eee See eee eee Ee eee ee [80 | 8o | to et oo es fd ee ee ee Eee ees eee ee Bee ese Lee ee ee [| 10 [eo | io {ot | too [es fo] tooo | 10 [60 | io {or too [es fo tooo [ 40 [eo [to Tot too [es Po tooo [ io [ 60 fT oT ot too es to tooo [ 10 [eo [to fon [too [es Po tooo [ io {60 [40 fot too [as fo Tt [ 10 [eo [to fon [too foes Ps tooo [ 10 [60 {io {orf too [es fs tooo | to [60 to ot too es Ps too soa [io {60 [140 fT ot to Ts tp Tc ls dT [0 soe ero es [oie ee ee a ce ccc ccc Electrical Specification Notes blocking voltage= 5V/jts. Gate Bias = OV, 1002 (during turn-off time interval) (1) See Figures 5.1 through 5.9 for current ratings at specified operat (10) Test condition is maximum rated RMS current except TO-92 ing case temperatures. devices are 1.2Ap,; T106/T107 devices are 4Ap,. (2) See Figure 5.10 for ler vs To (11) Vp = 6VDG, R,, = 1000. See Figure 5.19 for simple test circuit for (3) See Figure 5.11 for instantaneous on-state current (ir) vs on-state measuring gate trigger voltage and gate trigger current voltage (vr) - (typical. (12) See Figures 5.1 through 5.9 for maximum allowable case temper- s ature at maximum rated current. 3 eee Figs % id Vans To (13) Igy = 500A maximum for Te = -40°C for T106 devices. igure 5. we oo (14) I= 10mA maximum for Tc = -65°C for 2N5060 Series and (6) For more than one full cycle, see Figure 5.14. NG564 Serice devi (7) 0.8-4.0A devices also have a pulse peak forward current on-state 2N6564 Series eves 3 rating (repetitive) of 75A. This rating applies for operation at 60Hz, (15) !4 = 6MA maximum for Tc = -40°C for T106 devices. 75°C maximum tab (or anode) lead temperature, switching from (16) Pulse Width < 10s. . 80V peak, sinusoidal current pulse width of 10s minimum, 15)s (17) Igy = 3501 maximum at To = -65°C for 2N5060 Series and (8) See Figure 5.15 for tg, vs lar (18) Latching current can be higher than 20mA for higher Icr types. (9) Test conditions as follows: Also latching current can be much higher at -40°C. See Figure To < 80°C, rectangular current waveform; rate-of-rise of currents 5.18. 10A/js. Rate-of-reversal of current < 5A/jts. Iry = 1A (50s pulse) (19) Tg = Ty for test conditions in off-state. Repetition Rate = 60pps. Vary = Rated. Va = 15V minimum, Vopm = Rated. Rate-of-tise reapplied forward Teccor Electronics, Inc. 5-7 Sensitive SCRs (972) 580-7777

__ THERMAL RESISTANCE (STEADY STATE) °” Bec el CWCYPICAD > 120 \\| [OAD Resstve orinducve a C ZZ i Fg | NL CASPTENSERATORE: Noasued = oO gi ‘as Shown on Dimensional Drawing wi bo INA r CONS —7 it pelLLNI TT ee PCL £ 6 * Ltt UT ET TI seams SS Si ee ° os 810s s.oaAmps| | to Ts AMS On Stale Gurortirgaysg)~ AMPS 0.0Amps[ | 30. ~| | 34 |} —FigureS.1_ Maximum Allowable Case Temperature vs RMS On-Slate Current (JEDEC “2N" Series and “EC" Series) Electrical Isolation Teccor’s isolated sensitive SCRs will withstand a minimum high 130 potential test of 2500 VAC RMS from leads to mounting tab over ow NK | |__| guptextwaverome: seca the device's operating temperature range. See table below for SN T_[ [seeestecete ss other standard and optional isolation ratings. 5 0 SO Se Shown on Dimensional Drawing RY | ss ELECTRICALISOLATION, == 5” i I\\ fia >> Lor pg f « VAC(RMS) ei | ITN | iT fT © 8 10 18 20 28° 30 358 40 THERVOTAB™ FMS On State Curent rmsy)- AMEE TO-220AB Current (T106 and 7107) *For 4000V Isolation use “V" Suffix in part number **UL Recognized File #271639 © 10 Dw A | areitwaveon shuvoat BP oIN CONDUCTION ANGLE: 160° 7 <2 — St Shown on Dimendional Drawng Pol AS TT Sy WW Fol | [yt J Tf eo | TTT J 7 | o 02 04 est os 08 10 12 Average On-Site Curent yay) Amos Figure 5.3 Maximum Allowable Case Temperature vs Average On- State Current (JEDEC “2N” Series and “EC” Series) Sensitive SCRs 5-8 Teccor Electronics, Inc. (972) 580-7777

2 NY |__ [eanouctionanato- 5 120 CONDUCTION ANC

5 10 \\\\ ICASE TEMPERATURE: Measured § g —! las Shown on Dimensional Drawing ® § 100 Se _ 8 100 TK D 7 BS %, Fool VP eel : ENG | | | yl 10; Pe ‘=f gol \\ yp Rew § © -—2NNS = ° A 2 ek 2 PANS. 3 2 So a | 3 |_| A) % ne & 2 * bol [QT ty | < «0 ENG a 3 Ea PCIE COOMA TT o 05 640) 61s 20 2s 0 3g 2 Average On State Curent ay - AMES 0 02 04 08 o8 10 12 14 Average On-State Current [lryayyl Amps Figure 5.4 Maximum Allowable Case Temperature vs Average On- Figure 5.7 Maximum Allowable Ambient Temperature vs Average On- State Current (T106 and T107) State Current 140 120

2 CTT] GUARENT WAVEFORM’ Sinusoidal ° | |] CURRENT WAVEFORM: Sinusoidal

= LOAD: Resistive or Inductive zB 110 CONDUCTION ANGLE: 180° E120 MN CONDUCTION ANGLE: 180° 2 ~~ | TEMPERATURE: Measured as g N FREE AIR RATING A S Shown on Dimensional Drawings FH tie 2 100 Se & 100 0; E San

5 Sa VY 5 0 pe

5 im Se ° SS IN& 3 :” Seal. § e ~~

60 SYS F4 3

i TSAR ROS |S 2% 3 2 2 "2N' SERIES ray) | “Sy | e 8 3 5 40 SS a) 2 2 7 g 2 Fa 2 2 50 ° O01 02 03 04 05 O06 OF O8 O89 ° 2 4 6 8 10 On-State Current - Amps FMS On-State Current [hayygy)~ AMES Figure 5.5 Maximum Allowable Ambient Temperature vs On-State Figure 5.8 Maximum Allowable Case Temperature vs RMS On-State Current (1.5 Amp, JEDEC “2N’ Series and “EC” Series) Current » 110 : CURRENT WAVEFORM: Sinusoidal S| CURRENT WAVEFORM, Sruno = 120 CONDUCTION ANGLE” 160" 2 100 SN CONDUCTION ANGLE; 180° = CASE TEMPERATURE: Messured g rt tt FREE AIR RATING 2 aS 238 Shown on Dmensonal Drawings £ 100 § x0 KQcw™” 7eN Peo OS = 0 IN a Ee INIA.

5 S A

ek NCR ie/ | ft tll Pd 2 60 Ee, in $ 3 F — 40 PAK 2 3 5. 3 é ‘#5 i B B 3 EI 50 = 20 0 02 04 06 O8 10 12 14 16 18 20 ° ‘ e 8 ‘ . . ’ RMS On-State Current (hryag)] « Amps ‘rerage Oniate Curert Iya“ Am Figure 5.6 Maximum Allowable Ambient Temperature vs RMS On- Figure 5.9 Maximum Allowable Case Temperature vs Average On- State Current (T106 and T107) State Current Teccor Electronics, Inc. 5-9 Sensitive SCRs (972) 580-7777

oD *“ ([ Sentetnete | TE go LLU] [eexcritenenvege | |i | sel(Lilir TLL OL ee ALE TT TTT es ee a blow NT TP 35 oS B20 LN So. COSC e. ONCE LE = —— ce {fay ty Pee | a2 CORSE esftitt ttt tres

8 COCs e Hi tT tT tT ttt ei

GOI a OEE ee | 65 40 15 425 485 4110 4125 6 “ 15 bad baad #110 125 Case Temperature (Tc) - °C Case Temperature (Tg) - ‘© Figure 5.10 Normalized DC Gate-Trigger Current vs Case Temperature Figure 5.12 Normalized DC Gate-Trigger Voltage vs Case Temperature = = Cee || A aes es ee _ ao HINT TTT A PCE ETA ge tN a Seo § 6 | EAE yy |_| 3 INLET ° Ti06/T107 DEVICES J 2 10 = SSS ee eee oo LA FT ; [rare ow Instantaneous On-State Voltage (v7) - Volts Case Temperature (Tc) - ‘C Figure 5.11 Instantaneous On-State Current vs On-State Voltage Figure 5.13 Normalized DC Holding Current vs Case Temperature (Typical) ee Ee E LOAD: Resistive Zig 10 AMP DEVICES RMS ON-STATE CURRENT: [!T(RMs)]: Max = Fit tt t+ Rated Value at Specified Case Temperature fa a ——— |

60 Ft sae devices EH

= so | —_] TE SEES | 5 4 bE SEEN 8 ap DEVICES 1] an mee} | SSS Sf see een || Ill] 6 | essere fl | Pe o ae a 2 8S a 6 as a OO = Cry o 5 Pt ft try SO an S 3 FOLLOWING SURGE CURRENT a) co - s+ | mele Rouarncrecnerered |oeawh pevess| Pt TT TT] a wasnerurn & 1 | 2 a 4se sw a oo asoco cole ov owe emo to Surge Current Duration - full cycles Figure 5.14 Peak Surge On-State Current vs Surge Current Duration Sensitive SCRs 5-10 Teccor Electronics, Inc. (972) 580-7777

Seesee fcmmeatt eee ee *° PORTIA A tt © mini _ 70 ‘operating temperature range, EINENTNE TE goo [tit | | | | tt fi LION er UT | [ag= MEE re I NER it ia

2 SS SS te Sas RoE

5, Cot » Lt | a ES es Case Temperature (Tc) - °C a on oor on 1 10 100 DC Gate Trigger Current (Iq) - mA Reset Normally-closed Figure 5.15 Typical Turn-On Time vs Gate Trigger Current Pushbutton alo 100

4 CONDUCTION ANGLE: 180° WA ove

E10 O. ) ® let © 1N4001 o A 400 : so ios 4 Tor Devices (a1) 6 ~~ ! ae & 20 = & ° pA iin arere= | | Figure 5.19 Simple Test Circuit For Gate Trigger Voltage and Current

2 LF | | [| Measurement

° 1 2 3 4 RMS On Stato Curent irypyasyl- Amps Note: V1 — 0-10 volt DC meter VGT — 0-1 volt DC meter Figure 5.16 Power Dissipation (Typical) vs RMS On-State Current eT ie DC millimeter — 1K potentiometer To measure gate trigger voltage and current, raise gate voltage 2% wae (Var) until meter reading V1 drops from 6 volts to 1 volt. Gate 8 [fSecineticrsacee | | trigger voltage is the reading on Ver just prior to V1 dropping 3 r | 1sdtJ Gate trigger current Iq can be computed from the relationship: ae 4 5 v, g GT a ae ga an where Ig is reading (in amps) on meter just prior to V1 dropping. P| tel 1 Note: lor may turnout to be a negative quanily (tigger current ° LT | | |] flows out from gate lead). ea ° 2 4 6 8 10 ANS On-State Curent yas - AMPS Figure 5.17 Power Dissipation (Typical) vs RMS On-State Current Teccor Electronics, Inc. 5-11 Sensitive SCRs (972) 580-7777

1.0) 2 140 TF Me ; Nees oo PUTAS ONT & 100 ims Bane | i ~~ ee ee ee CS 80 >< <a

2 UTI

g °° F g ‘tm 0.8 - 4.0A DEVICES & 40 Ey aa 20 ke tw >| oO 1.0 3.0 5.0 7.0 10 30 50 70 100 PEAK CURRENT DURATION(ty) - ps Figure 5.20 Peak Repetitive Capacitor Discharge Current 180 160 2 IS a 140 aa i KP Mm _| FA 400 DN PN a oO we 80 oS 5 S 3 ®° NI oN P.La HH | ONT x I. & 40 TM aN NO Ble tw > al 0.8 - 4.0A DEVICES NOI ; iN 1.0 3.0 5.0 7.0 10 30 50 70 100 PEAK CURRENT DURATION(ty) - Hs. Figure 5.21 Peak Repetitive Sinusoidal Curve Sensitive SCRs 5-12 Teccor Electronics, Inc. (972) 580-7777

Product Information

T106M1 specifications and overview.

Summary

Electrically-isolated To-220AB package

Description

Electrically-isolated To-220AB package

Source title T106M1 Datasheet(PDF) - Teccor Electronics

Related Parts

More parts from the same family.

Browse manufacturer