T10-5104-040

T10-5104-020 MAGNETROL | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

The T10 floatlevelswitch offers industrialand munici - pal usersa low-cost solution to w ide differentiallevel app lications. The m oving ballast causes a flipping mo tionof thefloatto provide positiveswitchingaction even under turbulent conditions. Recomm ended for use ineithercleanor dirty liquids,itisidealforuse in sump control,w etwellapplications and pilotsystems. Customer Supplied Control Pump Off Pump On 1⁄2 differential band 1⁄2 differential band 20, 40, or 60 ft. (6, 12, or 18 m) differential band T10 FloatLevelSwitch F E A T U R E S

• Differentialband 20, 40, or60 feet( determinedby cablelength)
• May be wiredforautomaticfillorempty cycles
• Drycontactswitchmechan ism
• CableCSA(SJTO)approved
• Switch chattereliminatedw ith m ovingballast
• Singlefloatwithsimple controlcircuiteliminates the need forlatchingdevicesordoubleswitching withtwo units
• Specific gravityrange of0.6to1. 5
• Positiveswitchingaction—even in turbulent conditions
• Cableanchoringpointprotectedby adjustablestrain relief
• AllPVCexposed comp onentsm ake itresistantto water-based chemicals
• Mou nts easilyby cable tie (included) or optional cablew eight A P P L I C A T I O N S
• W aterand w astewater
• PVCcom patiblecaustics
• PVCcom patiblechem icals
• PVCcom patibleacids Sw itchtype SPDT drycontact Process temp erature +140 ° F (+60° C) ma ximum Am bienttempe rature +32° to+140° F (0° to+6 0° C) Spe cificgravity 0.6 minimum /1.5ma ximu m Differentialband 18 inches (457 mm) minimum /60 feet(18meters)maximum Materialsofconstruction Polyvinylchloride(PVC)withadjustableneoprene strainrelief and butylcosm etic ring Cab lesize 18 AWG (3x 1.5 mm) 41strands No n- inductiveswitch ratings 21.00 @ 120 VAC /21.00 @ 240 VAC 14.00 @ 30 VDC /0 .6 0 @ 120 VD C /0.30 @ 240 VDC S P E C I F I C A T I O N S

Cable tie m ethod (stand ard) A pipe or other structure mu st be available in the tank to w hich the plastic cable tie may be affixed. Referto Figure 7. Pos ition the adjustable strain reliefon the cable to allow on e-halfof the dis - tan ce of the differential band betwee n the end of thisstrainreliefand the end of the strain relief on the float. Securethecabletothe structurewithone cable tie atthe m idpointof the strainrelief. Secure the second cable tie to the structure at the top end ofthe adjustablestrain relief,leavingapproximatelytwo inches (51mm) of free strainrelieftow ardsthe float. Proceed towiretheunit. NO TE: Be surethatnothing inthe tank preventsthe full extension ofthecable in eitherdirection. T10 levelswitchmay be m ounted by usingcableties includedw ith the unit,or by theoptionalcablew eight wh ich m ustbe purchased separately. CAU TION: The recommend ed m ethod ofcarrying theT10 isby thecable.The unique moving ballastinthe unitmay cause ittounexpectedlyflip out ofthe individual’shands. M O U N T I N G P R O C E D U R E Cablewe ightmet hod (optional) When an anchoring structure in the tank isnotavailable,the cable w eight m ethod shou ld be used. Referto Figure 8. Position the adjustable strain relief on the cableto allow one half the distance of the desired differential band between the midpointof the adjustablestrainreliefon the float. Rem ove one of the screw s in the clamp at the top of the w eight. Loosen the second screw. Referto Figure9. Position the w eight at the m id - point of the adjustable strain relief. Tighten both screw s to secure the weightto the cable.Be sure the cable cannot be pulled through the adjustablestrain relief. Low erthe unitinthe tank untilthe cable we ight ispositioned at the midpointofthe desired differential band. Secure the cable at the top of the tank. DO NO T secure the cable to any sharp objectw hich could cut the cable. Proceed to wire the unit. 5.25 (133) 9.25(235) Floatstrainrelief Adjustablestrainrelief 316/316L SS Weight Clamp Adjustable strain relief 5.00 (127) 1.50 (38) Span (20, 40, or 60 feet) 10'10' Tether point at half of span Tether point strain relief Cable floats Clamps 10' Model T10 Cable NOTE: Minimum distancebetween anchor pointon adjustablestrain reliefand float strainreliefis 9.00 inches(229). Cableweight (optional) NOTE: Cable floatsnot providedwith20' cable, one floatprovidedwith 40' cable,and two floats providedwith60' cable. D I M E N S I O N A L Inches(m m ) Adjustable strain relief Tank wall Float strain relief Cable weight Pipe Adjustable strain relief Cable ties Float strain relief Figure7 Figure9 Weight Clamp Adjustable strain relief Figure8

B U LLE TIN: 44-121.5 EFFEC TIVE: July2009 SU PE R SED ES: M ay 2007 5300 Belmont Road • Downers Grove, Illinois 60515-44 99 • 630-969-4000 • Fax 630-969-9489 • www.magnetrol.com

145 Jardin Drive, Units 1 & 2 • Concord, Ontario Canada L4K 1X7 • 905-738-9600 • Fax 905-738- 1306

Heikensstraat 6 • B 9240 Zele, Belgium • 052 45.11.1 1 • Fax 052 45.09.93 Regent Business Ctr., Jubilee Rd. • Burgess Hill, Sussex RH15 9TL U.K. • 01444-871313 • Fax 01444-871317 Copyright © 2011 MAGNETROL INTERNATIONA L, INCORPORATED. All rights reserved. Printed in the USA. Performa nce specification s are effective with date of issue and are subject to change without notice. The quality assurance system inplaceat Mag netrol ® guarantees the highestlevelof qualitythroughoutthe comp any. M AGNE TR OL iscom mitted to providing fullcustom ersatisfaction bothin quality products and qualityservice. The MA GNE TRO L qualityassurance system isregistered to ISO 9001 affirmingitscom - mitment to known internationalquality standardsprovidingthestrongestassurance of product/service qualityavailable. AllM AGN ETRO L m echanicalleveland flow controls arewarrantedfree ofdefectsin m aterials or w orkman shipforfivefullyears from the dateoforiginalfactoryshipment. Ifreturned within the warrantyperiod; and, upon factory inspection ofthe control,the cause oftheclaim isdetermined to be cov - ered underthe warranty;then,MA GNETROL w illrepairorreplacethecontrolatno cost tothe purchaser(orow ner) otherthan transportation. MA GNE TRO L shallnotbe liable formisap - plication,laborclaims,director consequentialdam age orexpense arising from the installation oruse ofequipm ent. There are no otherw arrantiesexpressedor implied,exceptspecialw ritten warranties covering som e MA GNE TROL products. Q U A L I T Y W A R R A N T Y M odelT10-5104-020 isavailable forquick shipm ent,usually withinone week after factory receiptofa com pletepurchase order, through the Expedite ShipPlan (ESP). ESP service m ay notapplytoordersoften unitsorm ore. Contactyourlocalrepresenta - tiveforleadtimes on largervolum e orders,as wellasotherproductsand options. EExpedite SShip PPlan E S P W I R I N G P R O C E D U R E The T10 float level switch may be wired for fill or empty pump control functions or as a high or low level alarm. Wire according to the terminal connection drawing below. CAUTION: 1. The unused wire (third wire) must be electrically insulated. 2. Do not fasten electrical cable onto rough or sharp surfaces. 3. U se only on equipm ent with thermal overload protection. 4. Consult local codes for proper application. FOR EM PTY PUMP CONTR OL OR H IGH ALAR M FUNCTIONS Connect the blue and black wires. FOR FILL PUMP CO NTROL OR LO W ALAR M FUNC TIONS Connect the blue and brown wires. Close on High / Open on Low Common Close on Low / Open on High Line In Line Out to Load Line Out to Load Blue Black Brown MA GNE TRO L, MAG NE TROL logotype are registered trademarks of MAG NETR OL INTERNATIONAL, IN CORPORATED.