T08-5220 AEC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
Part No: 5220 T08 Series Tip Over Switch - Mercury Tilt switches “make” when the electrode is tilted below horizontal and “break” when tilted above the horizontal. Total travel from “make” to “break” is the “Maximum included angle” shown below. The component to which the switch is attached must have a total tilt angle greater than the “Maximum included angle” for proper operation. Features: * Un-Insulated * Form: NC/SPST/Vertical Mount as shown * Angles Referenced from Horizontal * Single Electrode * Hermetically Sealed * Small Package Size 0.670 Ref. * Narrow Included Angle * High Current Capability * Low Contact Resistance * Long Life 12° / 17° Dimensions in inches Typical Break Angle * : 12° / 17° Typical Remake Angle: 7° / 14° * Make/break angles are electrode + (above) / - (below) 0° horizontal reference Switch Ratings: Max Switching Voltage 240V 60Hz Max Switching Current 1.7A / 120V 60Hz; 0.75A / 240VAC ; 1A / 12VDC Initial Contact Resistance (Max). 5 Ohms max (0.05A at 12VDC) Stand Off Voltage (contact to contact) 1240 V Operating Temperature -37º to 220ºF / -38º to 105ºC Storage Temperature -40º to 356ºF / -40º to 180ºC Typical number of operations at specified load 10,000,000 G-Force Activation G-Level/Range N/A Dimensions: Weight per 100pcs. Lbs / Kgs: 0.77 / 0.35 Body Length (with leads). Inches / Millimeters: 0.682 / 17.3 Maximum Diameter. Inches / Millimeters: 0.612 / 15.2 Materials: Lead Wire Type N/A Lead wire length/skive/termination N/A Finish: Tin American Electronic Components Inc., 1101 Lafayette Street, Elkhart, Indiana. USA Tel: +1-574-295-6330 Fax: +1-574-293-8013 Email: sales@aecsensors.com http://www.aecsensors.com © American Electronic Components Inc 2006 Specifications are subject to change without notice. E&OE. 5220 11.20.08