DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Page 1 of 2 www.aecsensors.com Sales Department Tel: (888) 847-6552 DG28 miniature automotive pcb power relay Contacts Contact number & arrangement SPST-NO (1 Form A), SPDT (1 Form C) Contact material AgSnOInO Max. switching voltage DC 27V Min. switching current / voltage 100mA / 12VDC Rated load 30A (SPST-NO) ; 35A / 15A SPDT (at 13VDC resistive) Max. continuous current 40A (at 13VDC) Max. switching current Make SPST-NO 40A : SPDT 40A (NO) / 20A (NC) Break 40A (NO) : 20A (NC) Initial resistance <50mΩ, max. at 0.1A/24VDC Coil Rated voltage DC 6V, 12V, 24V Must release voltage ≥0.1Un Operating range of supply voltage See coil table 1 Rated power consumption DC 1.2W, 1.8W - see coil table 1 Insulation Insulation resistance 100MΩ at 500VDC, 50%RH Dielectric strength coil to contact 550Vrms, 1min contact to contact 550Vrms, 1min General Data Operating time (typical) mS 5 (10mS max)) Release time (typical) mS 5 (10mS max) Electrical Life ops 1 x 105 Mechanical life ops 1 x 107 Dimensions L x W x H 21.2 x 13 x 19.1 Weight 18g approx. Ambient temperature storage -40 to 125°C operating -40 to 125°C Shock resistance 196m/s2 (20g) Vibration resistance 10Hz-500Hz 49m/s2 (5g)
- miniature - only 21 x 13 x 19.2 mm
- optimised for DC switching
- Cost effective
- RoHS Compliant Ref: DG28 080811JHM DRAFT
PCB Mounting Dimensions and Wiring Fig. 2 DG28 miniature automotive pcb power relay Ref: DG28 080811JHM Coil Data Table 1 Coil Voltage Code Nominal Voltage (V DC) Coil Resistance (Ω) ±10% Must operate voltage max. (V DC) Must release voltage min. (V DC) Max allowable Overdrive V DC (23’C) Standard Coil 1006 6 19 3.3 0.6 9 1012 12 90 6.8 1.2 19.6 1024 24 362 13.9 2.4 39.3 Sensitive Coil S006 6 30 4.5 0.6 11 S012 12 120 9.0 1.2 22.1 S024 24 480 19.2 2.4 44.3 Page 2 of 2 www.aecsensors.com Sales Department Tel: (888) 847-6552 Overall Dimensions Fig. 1 Wiring Diagrams (Bottom View) Mounting Holes (Bottom View) All Dimensions in mm Ordering codes Type Contact material Contact arrangement Cover protection and mounting Coil code D G 2 8 - 7 0 - 1 5 - Contact material 70 - AgSnOInO see coil table 1 Contact arrangement 11 - SPDT (1 C/O, 1 Form C) 21 - SPST-NO (1N/O, 1 Form A) Cover protection category 1 - Open type, no cover, IP00 Connection mode 5 - for PCB Specifications are subject to change without notice. E&OE. Notes: 1: All parameters, unless otherwise specified, are measured at ambient temperature of 23ºC. 2: Maximum make current refers to inrush current of motor load. 3: Electrical life is strongly dependent of switching frequency, On/Off ratio and environmental conditions. * Not fitted for SPST-NO type 6 (4) x Ø 1.4 1.5 x 1.5 13.7 ± 0.2 1.85 ± 0.2 2.4 ± 0.2 3.0 ± 0.2 9.7 ± 0.2 DRAFT