SVT1040SA SILAN | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 8
Technical content
SVT1040SA_Datasheet HANGZHOU SILAN MICROELECTRONICS CO.,L TD Rev.:1.2 http: //www.silan.com.cn Page 1 of 8 10A, 40V N-CHANNEL MOSFET
DESCRIPTION
SVT1040SA is an N-channel enhancement mode power MOS field effect transistor which is produced using Trench Mos technology. The improved trench stripe cell and the improved guard ring terminal have been especially tai lored to minimize on -state resistance, provide superior switching performance, and withstand high energy pulse in the avalanche and commutation mode. These devices are widely used in UPS, DC-DC converters.
FEATURES
10A, 40V, RDS(on)(typ.)=15m@VGS=10V Low gate charge Low Crss Fast switching Improved dv/dt capability 1、3. Source 2、4. Gate 7、8；5、6. Drain SOP-8-225-1.27 1 2 3 48
ORDERING INFORMATION
Part No. Package Marking Hazardous substance control Packing SVT1040SA SOP-8-225-1.27 SVT1040 Halogen free Tube SVT1040SATR SOP-8-225-1.27 SVT1040 Halogen free Tape & reel
SVT1040SA_Datasheet HANGZHOU SILAN MICROELECTRONICS CO.,L TD Rev.:1.2 http: //www.silan.com.cn Page 2 of 8 ABSOLUTE MAXIMUM RATINGS (PER DEVICE, UNLESS OTHERWISE NOTED, TJ=25C) Characteristics Symbol Ratings Unit Drain-Source Voltage VDS 40 V Gate-Source Voltage VGS ±20 V Drain Current TC=25° C ID A TC=100°C 6.3 Drain Current Pulsed IDM 40 A Power Dissipation (TC=25C) -Derate above 25C PD 3.2 W
0.03 W/C
Single Pulsed Avalanche Energy (Note 1) EAS 98 mJ Operation Junction Temperature Range TJ -55～+150 C Storage Temperature Range Tstg -55～+150 C THERMAL CHARACTERISTICS Characteristics Symbol Ratings Unit Thermal Resistance, Junction-to-Case RθJC 39 C/W Thermal Resistance, Junction-to-Ambient RθJA 85 C/W
SVT1040SA_Datasheet HANGZHOU SILAN MICROELECTRONICS CO.,L TD Rev.:1.2 http: //www.silan.com.cn Page 3 of 8 ELECTRICAL CHARACTERISTICS (PER DEVICE, UNLESS OTHERWISE NOTED, TC=25C) Characteristics Symbol Test conditions Min. Typ. Max. Unit Drain -Source Breakdown Voltage BVDSS VGS=0V, ID=250µ A 40 -- -- V Drain-Source Leakage Current IDSS VDS=40V, VGS=0V -- -- 1.0 µA Gate-Source Leakage Current IGSS VGS=±20V, VDS=0V -- -- ± 100 nA Gate Threshold Voltage VGS(th) VGS= VDS, ID=250µ A 1.0 -- 2.0 V Static Drain- Source On State Resistance RDS(on) VGS=10V, ID=10A -- 9.0 13 m VGS=4.5V, ID=10A 11 16 m Input Capacitance Ciss f=1MHz, VGS=0V, VDS=25V -- 1870 -- pF Output Capacitance Coss -- 156 -- Reverse Transfer Capacitance Crss -- 136 -- Turn-on Delay Time td(on) VDD=20V, VGS=10V, RG=3.3Ω, ID=10A (Note 2,3) -- 8.2 -- ns Turn-on Rise Time tr -- 52 -- Turn-off Delay Time td(off) -- 55 -- Turn-off Fall Time tf -- 19 -- Total Gate Charge Qg VDD=20V, ID=10A, VGS=10V (Note 2,3) -- 38 -- nC Gate-Source Charge Qgs -- 7.4 -- Gate-Drain Charge Qgd -- 6.7 -- SOURCE-DRAIN DIODE RATINGS AND CHARACTERISTICS(PER DEVICE) Characteristics Symbol Test conditions Min. Typ. Max. Unit Continuous Source Current IS Integral Reverse P-N Junction Diode in the MOSFET -- -- 10 A Pulsed Source Current ISM -- -- 40 Diode Forward Voltage VSD IS=10A, VGS=0V -- -- 1.4 V Reverse Recovery Time Trr IS=10A, VGS=0V, VR=40V, dIF/dt=100A/µs -- 14 -- ns Reverse Recovery Charge Qrr -- 7.7 -- nC Notes: 1. L=1mH, IAS=14A, VDD=25V, RG=20,starting TJ=25C; 2. Pulse Test: Pulse width ≤300μs, Duty cycle≤2%; 3. Essentially independent of operating temperature.
SVT1040SA_Datasheet HANGZHOU SILAN MICROELECTRONICS CO.,L TD Rev.:1.2 http: //www.silan.com.cn Page 6 of 8 TYPICAL TEST CIRCUIT Same Type as DUT DUT VGS Ig VDS VGS 10V Charge Qg Qgs Qgd Gate Charge Test Circuit & Waveform Resistive Switching Test Circuit & Waveform VDS VGS RG RL VDD VGS VDS VGS 10% 90% td(on) ton tr td(off) toff tf Unclamped Inductive Switching Test Circuit & Waveform VDS RG VDD VGS L tp ID BVDSS IAS VDD tp Time VDS(t) ID(t) EAS = 1
2 LIAS
2 BVDSS
Vgs(th) Qg(th)
SVT1040SA_Datasheet HANGZHOU SILAN MICROELECTRONICS CO.,L TD Rev.:1.2 http: //www.silan.com.cn Page 7 of 8 PACKAGE OUTLINE SOP-8-225-1.27 UNIT: mm L 0.25 b e D A2 A EE1 c A 1.35 1.55 1.75 A1 0.05 0.25 A2 1.25 1.65 b 0.32 0.42 0.52 c 0.15 0.20 0.26 D 4.70 4.90 5.30 E 5.60 6.00 6.40 E1 3.60 3.90 4.20 e 1.27BSC 0.15 L 0.30 __ 1.27 MAXNOMMIN MILLIMETER SYMBOL Important notice : 1. The instructions are subject to change without notice！ 2. Customers should obtain the latest relevant information before placing orders and should verify that such information is complete and curre nt. Please read the instructions carefully before using our products , including the circuit operation precautions. 3. Our products are consumer electronic products or the other civil electronic products. 4. When using our products, please do not exceed the maximum rating of the products, otherwise the reliability of the whole machine will be affected. There is a certain possibility of failure or malfunction of any semiconductor product under specific conditions. The buyer is responsible for complying with safety standards and taking safety measures when using our products for system design, sample and whole machine manufacturing, so as to avoid potential failure risk that may cause personal injury or property loss. 5. It is strongly recommended to identify the trademark when buying our products. Please contact us if there is any question. 6. Product promotion is endless, our company will wholeheartedly provide customers with better products! 7. Website: http: //www.silan.com.cn
SVT1040SA_Datasheet HANGZHOU SILAN MICROELECTRONICS CO.,L TD Rev.:1.2 http: //www.silan.com.cn Page 8 of 8 Part No.: SVT1040SA Document Type: Datasheet Copyright: HANGZHOU SILAN MICROELECTRONICS CO.,LTD Website: http: //www.silan.com.cn Rev.: 1.2 Revision History: 1. Update the curve 2. Update electrical characteristics 3. Update electrical diagram and typical test circuit 4. Update package outline 5. Update important notice Rev.: 1.1 Revision History: 1. Modify the Circuit symbol Rev.: 1.0 Revision History: 1. First release