SVFH

SVFH MSYSTEM | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

MODEL: SVFH SVFH SPECIFICATIONS ES-1324 Rev.2 Page 1/3 http://www.m-system.co.jp/ Plug-in Signal Conditioners M-UNIT SIGNAL TRANSMITTER (high dielectric strength) Functions & Features

• Up to 5 kV isolation between input to output or power input
• Terminal cover
• PWB coating (2.83) 111 (4.37) 143 (5.63) mm (inch) MODEL: SVFH–[1][2]–R[3]

ORDERING INFORMATION

• Code number: SVFH-[1][2]-R[3] Specify a code from below for each of [1] through [3]. (e.g. SVFH-04W-R/Q)
• Input range (e.g. -600 – +600 V DC)
• Specify the specification for option code /Q (e.g. /C01) [1] INPUT Voltage 2W: -100 – +100 mV DC (Input resistance 1 MΩ min.) 4W: -10 – +10 V DC (Input resistance 1 MΩ min.) 5W: -5 – +5 V DC (Input resistance 1 MΩ min.) 0: Specify range (Please specify from the following input range.)
• -20 - +20 mV DC
• -40 - +40 mV DC
• -200 - +200 mV DC
• -250 - +250 V DC
• -500 - +500 V DC
• -600 - +600 V DC
• -700 - +700 V DC
• -1000 - +1000 V DC
• -1250 - +1250 V DC
• -1300 - +1300 V DC
• -1500 - +1500 V DC
• -2000 - +2000 V DC (CE not available) [2] OUTPUT Current A: 4 – 20 mA DC (Load resistance 750 Ω max.) D: 0 – 20 mA DC (Load resistance 750 Ω max.) Voltage 3: 0 – 1 V DC (Load resistance 1000 Ω min.) 4: 0 – 10 V DC (Load resistance 10 kΩ min.) 5: 0 – 5 V DC (Load resistance 5000 Ω min.) 6: 1 – 5 V DC (Load resistance 5000 Ω min.) 4W: -10 – +10 V DC (Load resistance 10 kΩ min.) 5W: -5 – +5 V DC (Load resistance 5000 Ω min.) 7W: -7.5 – +7.5 V DC (Load resistance 7.5 kΩ min.) POWER INPUT DC Power R: 24 V DC (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) [3] OPTIONS blank: none /Q: With options (specify the specification) SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating GENERAL SPECIFICATIONS Connection: M4 screw terminals (torque 1.2 N·m) Screw terminal: Chrome-plated steel Housing material: Flame-resistant resin (black) Isolation: Input to output to power Overrange input: -5 to +105 % (±2000V DC max.) Zero adjustment: -0.2 to +0.2 % (front) Span adjustment: 99.8 to 100.2 % (front) INPUT SPECIFICATIONS ■ DC Voltage Input resistance: 1 MΩ min. (10 kΩ min. in power failure) Overload input 1000% 3 min. (±2000V DC max.) Overload input 300% 5 min. (±2000V DC max.) INSTALLATION Power consumption
• DC: ≤ 3 W Operating temperature: -10 to +60°C (14 to 140°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: Surface or DIN rail

MODEL: SVFH SVFH SPECIFICATIONS ES-1324 Rev.2 Page 2/3 http://www.m-system.co.jp/ Weight: 450 g (0.99 lb) PERFORMANCE in percentage of span Accuracy: ±0.1 % Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) Response time: ≤ 4 msec. (0 – 90 %) Line voltage effect: ±0.1 % over voltage range Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 5000 V AC @ 1 minute (input to output or power or ground)

2000 V AC @ 1 minute (output to power to ground)

STANDARDS & APPROVALS EU conformity: EMC Directive EMI EN 61000-6-4 EMS EN 61000-6-2 Low Voltage Directive EN 61010-1 Measurement Category I (input) Pollution degree 2 Input to output or power: Reinforced insulation (1500 V) Note: Input range higher than 1500 V DC is exempted from low voltage directive. RoHS Directive EN 50581 EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch) 1 2 3 4 5 6 11 12 13 14 15 16 7 8 9 10 54 (2.13) (.12) 8 (.31) 98 (3.86) 80 (3.15) 111 (4.37) 2–M4 MTG HOLE 10 (.39) 14–M4 SCREW TERMINAL COVER DIN RAIL 35mm wide

• When mounting, no extra space is needed between units.

MODEL: SVFH SVFH SPECIFICATIONS ES-1324 Rev.2 Page 3/3 http://www.m-system.co.jp/ SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM INPUT Output Driver OUTPUT Amplifier POWER SZIsolation Specifications are subject to change without notice.