18KBXH-E3A

18KBXH MSYSTEM | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

MODEL: 18KBXH http://www.m-system.co.jp/ 18KBXH SPECIFICATIONS ES-0493 Rev.1 Page 1/5 Rack-mounted DCS Signal Conditioners 18K-RACK STANDARD RACK Functions & Features

• Housing for storage of Rack-mounted DCS Signal Conditioners 18K-RACK
• Integrated rack and field terminals allow for signal conditioners to be removed without touching the terminal screws, making field wiring insulation tests possible
• Signal conditioner power via the rear rack bus for all 8 modules
• Connectors are available for direct connection to DCS units of various manufacturers
• Mounting bracket position selectable MODEL: 18KBXH–[1][2]

ORDERING INFORMATION

• Code number: 18KBXH-[1][2] Specify a code from below for each [1] and [2]. (e.g. 18KBXH-E1/W) [1] CONNECTOR 0: None U1: Fujitsu FCN type I/O connector E1: For Toshiba DCS SAMP1 card use E3: For Toshiba DCS SAIN1, SAI06 and SAO06 card use (Panasonic AXM220011 used) (DISCONTINUED; replace with code "E3A".) E3A: Toshiba DCS SAIN1, SAI06, SA006 card supported (Omron XG4A-2034 used) E4: For Toshiba DCS SAIN1 card use M-System guarantees the connecting section. [2] OPTIONS Mounting Bracket blank: Rack mounting, standard /W: Surface mounting

RELATED PRODUCTS

• Blank filler plate (model: P-181)
• Connector terminal block (model: CNT)
• Special cable with 40-pin connector (model: FCN) GENERAL SPECIFICATIONS Construction: Metal plates assembly Coating: Colored Zn-Cr Capacity: 8 positions Connection Power input: M4 screw terminals (torque 0.8 N·m) Field terminal: M3.5 screw terminals (torque 0.8 N·m) Screw terminal Power: Nickel-plated brass Field terminal: Nickel-plated steel Isolation: I/O connector to field terminal to power to FG INSTALLATION Power supply: Operational voltage range: 24 V DC ±10% Ripple 10 % p-p max. @ ≥ 1.3 A Operating temperature: -5 to +55°C (23 to 131°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: Rack or Surface Weight: 1.8 kg (4.0 lb) PERFORMANCE Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 500 V AC @ 1 minute (I/O connector to field terminal to power)

1000 V AC @ 1 minute (I/O connector or field terminal or

power to FG)

MODEL: 18KBXH http://www.m-system.co.jp/ 18KBXH SPECIFICATIONS ES-0493 Rev.1 Page 2/5 MOUNTING REQUIREMENTS unit: mm (inch) 101.6 (4.00) 255 (10.04) 273 (10.75) 4−M5 ANGLE BRACKET Note: Leave an appropriate amount of space above/below the rack for wiring. *100 (3.94) for JIS standard CONNECTION DIAGRAM FG 3 CN1 CN2 POWER FIELD TERMINAL Note : CN1 and CN2 are not provided without connector.

MODEL: 18KBXH http://www.m-system.co.jp/ 18KBXH SPECIFICATIONS ES-0493 Rev.1 Page 3/5 DIMENSIONS unit: mm (inch) 1 3 2 76 8 4 5 6 7 8 2 (.08) 243 (9.57) 134 (5.28) 2 (.08) /square7 RACK MOUNTING, STANDARD (Option: blank) /square7 SURFACE MOUNTING (Option: /W) 273 (10.75) 288 (11.34) CN2 CONNECTORCN1 1 3 5 72 4 6 8 150 (5.91) 101.6 (4.00) 8.5 (.33) 3-M4 POWER TERMINAL 8.2 (.32) 32-M3.5 FIELD TERMINAL * * Field I/O Terminal Block 1 2 1 2 1 2 3 4 3 4 3 4 1ch 7ch 8ch I/O CONNECTOR PIN ASSIGNMENT /square7 FUJITSU FCN TYPE I/O CONNECTOR /circle5 Connector Pin Assignment I/O Connector: Fujitsu FCN-365P40-AU CN1: Output 1 or input CN2: Output 2 PIN NO. ASSIGNMENT PIN NO. ASSIGNMENT A1 B1 A2 B2 A3 B3 A4 B4 A5 B5 A6 B6 A7 B7 A8 B8 A9 - A20, B9 - B20 are not in use Pin assignment is common to both CN1 and CN2 ch.1 + ch.2 + ch.3 + ch.4 + ch.5 + ch.6 + ch.7 + ch.8 + ch.1 − ch.2 − ch.3 − ch.4 − ch.5 − ch.6 − ch.7 − ch.8 − /square7 FOR TOSHIBA SAMP1 CARD USE /circle5 Location Output Connector: Hirose Electric HIF3BA-40PA-2.54DS (11) CN1: For SAMP1 CN2: For SAMP1 (for redundancy) 18K-RACK Location No. 1 2 3 4 5 6 7 8 CN1, CN2 1 2 3 4 5 6 7 8 SAMP1 Input No.

MODEL: 18KBXH http://www.m-system.co.jp/ 18KBXH SPECIFICATIONS ES-0493 Rev.1 Page 4/5 /square7 FOR TOSHIBA DCS SAIN1, SAI06 AND SAO06 CARD USE /circle5 Location I/O Connector: Omron XG4A-2034 CN1: SAIN1, SAI06, SAO06 (ch.1 - ch.8) CN2: SAIN1, SAI06, SAO06 (ch.1 - ch.8) (for redundancy) 18K-RACK Location No. 1 2 3 4 5 6 7 8 CN1, CN2 1 2 3 4 5 6 7 8 SAIN1, SAI06, SAO06 I/O No. /circle5 Connector Pin Assignment PIN NO. ASSIGNMENT 20 ch.1 + 19 ch.1 − 18 ch.2 + 17 ch.2 − 16 ch.3 + 15 ch.3 − 14 ch.4 + 13 ch.4 − 12 ch.5 + 11 ch.5 − 10 ch.6 + 9 ch.6 8 ch.7 7 ch.7 6 ch.8 5 ch.8 Pin assignment is common to both CN1 and CN2 The signal that is connected to the connector is the input signal or the output signal 1. Toshiba DCS SAMP1 uses Panasonic AXM220001. As connec- tor is discontinued, Omron XG4A-2034 is used as an alternative. (Replace cable side.) /square7 TOSHIBA DCS SAIN1 CARD USE /circle5 Location Output Connector: Hirose Electric HIF3BA-20PA-2.54DS (11) CN1: SAIN1 (ch.1 - ch.8) CN2: SAIN1 (ch.1 - ch.8) (for redundancy) 18K-RACK Location No. 1 2 3 4 5 6 7 8 CN1, CN2 1 2 3 4 5 6 7 8 SAIN1 I/O No. /circle5 Connector Pin Assignment PIN NO. ASSIGNMENT 20 ch.1 + 19 ch.1 − 18 ch.2 + 17 ch.2 − 16 ch.3 + 15 ch.3 − 14 ch.4 + 13 ch.4 − 12 ch.5 + 11 ch.5 − 10 ch.6 + 9 ch.6 − 8 ch.7 + 7 ch.7 − 6 ch.8 + 5 ch.8 − Pin assignment is common to both CN1 and CN2 The signal that is connected to the connector is the input signal or the output signal 1.

MODEL: 18KBXH http://www.m-system.co.jp/ 18KBXH SPECIFICATIONS ES-0493 Rev.1 Page 5/5 Specifications are subject to change without notice.