M5PT MSYSTEM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

MODEL: M5PT M5PT SPECIFICATIONS ES-2488 Rev.7 Page 1/3 http://www.m-system.co.jp/ Super-mini Terminal Block Signal Conditioners M5-UNIT PT TRANSMITTER Functions & Features

  • Converts an alternating voltage from a potential (voltage) transformer into a standard process signal
  • True RMS sensing
  • High-density mounting
  • Power LED 25 (.98) (3.82) 41 (1.61) mm (inch) MODEL: M5PT-[1][2]-[3][4]

ORDERING INFORMATION

  • Code number: M5PT-[1][2]-[3][4] Specify a code from below for each [1] through [4]. (e.g. M5PT-14W-R/Q)
  • Special output range (For codes Z & 0)
  • Specify the specification for option code /Q (e.g. /C01/S01) [1] INPUT Voltage 1: 0 – 110 V AC 2: 0 – 220 V AC 5: 0 – 150 V AC [2] OUTPUT Current A: 4 – 20 mA DC (Load resistance 550 Ω max.) Z: Specify current (See OUTPUT SPECIFICATIONS) Voltage 4: 0 – 10 V DC (Load resistance 1000 Ω min.) 5: 0 – 5 V DC (Load resistance 500 Ω min.) 6: 1 – 5 V DC (Load resistance 500 Ω min.) 4W: -10 – +10 V DC (Load resistance 8000 Ω min.) 5W: -5 – +5 V DC (Load resistance 4000 Ω min.) 0: Specify voltage (See OUTPUT SPECIFICATIONS) [3] POWER INPUT AC Power M: 85 – 264 V AC (Operational voltage range 85 – 264 V, 47 – 66 Hz) DC Power R: 24 V DC (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) [4] OPTIONS blank: none /Q: With options (specify the specification) SPECIFICATIONS OF OPTION: Q (multiple selections) COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating TERMINAL SCREW MATERIAL /S01: Stainless steel GENERAL SPECIFICATIONS Construction: Terminal block Connection: M3.5 screw terminals (torque 0.8 N·m) Screw terminal: Nickel-plated steel (standard) or stainless steel Housing material: Flame-resistant resin (black) Isolation: Input to output to power Input waveform RMS sensing: Up to 15 % of 3rd harmonic content Overrange output: Approx. 0 to 110 % at 1 – 5 V Zero adjustment: -2 to +2 % (front) Span adjustment: 98 to 102 % (front) Power LED: Green LED turns on when the power is supplied. INPUT SPECIFICATIONS Frequency: 50 or 60 Hz Input burden: 0.5 VA max. Overload capacity: 200 % of rating for 1 min., 120 % continuous Operational range: 5 – 120 % of rating OUTPUT SPECIFICATIONS ■ DC Current: 0 – 20 mA DC Minimum span: 1 mA Offset: Max. 1.5 times span Load resistance: Output drive 11 V max. ■ DC Voltage: 0 – 10 V DC Minimum span: 1 V Offset: Max. 1.5 times span Load resistance: Output drive 10 mA max.; at ≥ 1 V

MODEL: M5PT M5PT SPECIFICATIONS ES-2488 Rev.7 Page 2/3 http://www.m-system.co.jp/ INSTALLATION Power Consumption

  • AC: Approx. 2 VA at 100 V Approx. 3 VA at 200 V Approx. 3 VA at 264 V
  • DC: Approx. 2 W Operating temperature: -5 to +55°C (23 to 131°F) Operating humidity: 0 to 90 %RH (non-condensing) Mounting: DIN rail Weight: 80 g (2.8 oz) PERFORMANCE in percentage of span Accuracy: ±0.3 % with input 5 – 100 % (Input 10 – 100 % for the output codes 4W and 5W) Temp. coefficient: ±0.02 %/°C (±0.01 %/°F) Response time: ≤ 0.5 sec. (0 – 90 %) Ripple: 0.5 %p-p max. Line voltage effect: ±0.1 % over voltage range Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength (input to output to power to ground) DC powered: 2000 V AC @1 minute AC powered: 1500 V AC @1 minute FRONT VIEW Span Adj. Power LED Zero Adj. 1 2 3 4 5 6 7 8

MODEL: M5PT M5PT SPECIFICATIONS ES-2488 Rev.7 Page 3/3 http://www.m-system.co.jp/ EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch) 94 (3.70) 3 (.12)

  • When mounting, no extra space is needed between units. DIN RAIL 35mm wide 8–M3.5 SCREW7.3 (.29)1 2 3 4 5 6 7 8 SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM IsolationSZ RMS Operation Output Driver Resistance Divider3 OUTPUT U v uFUSE VT LOAD SOURCE

7 U(+)

V(–) POWER POWER LED (V) (±) Specifications are subject to change without notice.