SVB-0C-M2

SVB MSYSTEM | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

MODEL: SVB SVB SPECIFICATIONS ES-1307 Rev.4 Page 1/3 http://www.m-system.co.jp/ Plug-in Signal Conditioners M-UNIT SIGNAL TRANSMITTER (wide-output) Functions & Features

• Converts a DC input into a standard process signal
• Isolation up to 2000 V AC
• Fast response type available
• LCD meter
• Max. 30 V output available
• Load resistance 1500 Ω (20 mA output)
• High-density mounting Typical Applications
• Isolation between control room and field instrumentation (1.97) 127 (5) (3.15) mm (inch) MODEL: SVB–[1][2]–[3][4]

ORDERING INFORMATION

• Code number: SVB-[1][2]-[3][4] Specify a code from below for each of [1] through [4]. (e.g. SVB-6A-M2/E/K/Q)
• Special input and output ranges (For codes Z & 0)
• Specify the specification for option code /Q (e.g. /C01/S01) [1] INPUT Current A: 4 – 20 mA DC (Input resistance 250 Ω) A1: 4 – 20 mA DC (Input resistance 50 Ω) B: 2 – 10 mA DC (Input resistance 500 Ω) C: 1 – 5 mA DC (Input resistance 1000 Ω) D: 0 – 20 mA DC (Input resistance 50 Ω) E: 0 – 16 mA DC (Input resistance 62.5 Ω) F: 0 – 10 mA DC (Input resistance 100 Ω) G: 0 – 1 mA DC (Input resistance 1000 Ω) H: 10 – 50 mA DC (Input resistance 100 Ω) J: 0 – 10 μA DC (Input resistance 1000 Ω) K: 0 – 100 μA DC (Input resistance 1000 Ω) GW: -1 – +1 mA DC (Input resistance 1000 Ω) FW: -10 – +10 mA DC (Input resistance 100 Ω) Z: Specify current (See INPUT SPECIFICATIONS) Voltage 1: 0 – 10 mV DC (Input resistance 10 kΩ min.) 15: 0 – 50 mV DC (Input resistance 10 kΩ min.) 16: 0 – 60 mV DC (Input resistance 10 kΩ min.) 2: 0 – 100 mV DC (Input resistance 100 kΩ min.) 3: 0 – 1 V DC (Input resistance 1 MΩ min.) 4: 0 – 10 V DC (Input resistance 1 MΩ min.) 5: 0 – 5 V DC (Input resistance 1 MΩ min.) 6: 1 – 5 V DC (Input resistance 1 MΩ min.) 4W: -10 – +10 V DC (Input resistance 1 MΩ min.) 5W: -5 – +5 V DC (Input resistance 1 MΩ min.) 0: Specify voltage (See INPUT SPECIFICATIONS) [2] OUTPUT Current A: 4 – 20 mA DC (Load resistance 750 - 1500 Ω) B: 2 – 10 mA DC (Load resistance 1500 - 3000 Ω) C: 1 – 5 mA DC (Load resistance 3000 - 6000 Ω) D: 0 – 20 mA DC (Load resistance 750 - 1500 Ω) E: 0 – 16 mA DC (Load resistance 935 - 1875 Ω) F: 0 – 10 mA DC (Load resistance 1500 - 3000 Ω) G: 0 – 1 mA DC (Load resistance 15k - 30kΩ) DW: -20 – +20 mA DC (Load resistance 500 - 1000Ω) FW: -10 – +10 mA DC (Load resistance 1000 - 2000Ω) Z: Specify current (See OUTPUT SPECIFICATIONS) Voltage 8: 0 – 20 V DC (Load resistance 2000 Ω min.) 9: 0 – 30 V DC (Load resistance 3000 Ω min.) 8W: -20 – +20 V DC (Load resistance 2000 Ω min.) 0: Specify voltage (See OUTPUT SPECIFICATIONS) Caution: The load resistance must be within the indicated range for adequate operation. [3] POWER INPUT AC Power M2: 100 – 240 V AC (Operational voltage range 85 – 264 V, 47 – 66 Hz) DC Power R: 24 V DC (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) [4] OPTIONS (multiple selections) Input Signal Indicator blank: Without /E: With (0.0 - 100.0 % display) Response Time (0 – 90 %) blank: Standard (≤ 0.5 sec.) /K: Fast Response (≤ 25 msec.)

MODEL: SVB SVB SPECIFICATIONS ES-1307 Rev.4 Page 2/3 http://www.m-system.co.jp/ Standards & Approvals blank: Without CE /CE: CE marking (Not selectable with /E) Other Options blank: none /Q: Option other than the above (specify the specification) SPECIFICATIONS OF OPTION: Q (multiple selections) COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating TERMINAL SCREW MATERIAL /S01: Stainless steel GENERAL SPECIFICATIONS Construction: Plug-in Connection: M3.5 screw terminals Screw terminal: Chromated steel (standard) or stainless steel Housing material: Flame-resistant resin (black) Isolation: Input to output to power Overrange output: Approx. -10 to +110 % at 0 – 20 V Zero adjustment: -2 to +2 % (front) Span adjustment: 98 to 102 % (front) ■ DISPLAY (Input indicator) LCD digital display: 0.0 - 100.0 % (min. digit 0.1 %) (No scaling) INPUT SPECIFICATIONS ■ DC Current: Shunt resistor attached to the input terminals (0.5 W) Specify input resistance value for code Z. ■ DC Voltage: -300 – +300 V DC Minimum span: 10 mV Offset: Max. 1.5 times span Input resistance Span 10 – 100 mV : ≥ 10 kΩ Span 0.1 – 1 V : ≥ 100 kΩ Span ≥ 1 V : ≥ 1 MΩ OUTPUT SPECIFICATIONS ■ DC Current: -20 – +20 mA DC Minimum span: 1 mA Offset: Max. 1.5 times span Load resistance: Output drive 30 V max. and 15 V min.; 20 V max. and 10 V min. (0 % output = negative value) ■ DC Voltage: -20 – + 30 V DC (The 0 – 100 % output range values within -10 – +12 V range are not available.) Minimum span: 10 V Offset: Max. 1.5 times span Load resistance: Output drive 10 mA max. INSTALLATION Power Consumption

• AC: Approx. 5 VA at 100 V Approx. 6 VA at 200 V Approx. 7 VA at 264 V
• DC: Approx. 3 W Operating temperature: -5 to +60°C (23 to 140°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: Surface or DIN rail Weight: 400 g (0.88 lb) PERFORMANCE in percentage of span Accuracy: ±0.1 % Display accuracy: ±(0.1 % of FS + 1 digit) Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) Line voltage effect: ±0.1 % over voltage range Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 2000 V AC @1 minute (input to output to power to ground) STANDARDS & APPROVALS EU conformity: EMC Directive EMI EN 61000-6-4 EMS EN 61000-6-2 Low Voltage Directive EN 61010-1 Installation Category II Pollution Degree 2 Input or output to power: Reinforced insulation (300 V) Input to output: Basic insulation (300 V) RoHS Directive EN 50581

MODEL: SVB SVB SPECIFICATIONS ES-1307 Rev.4 Page 3/3 http://www.m-system.co.jp/ EXTERNAL DIMENSIONS unit: mm (inch) 3456 2187 80 (3.15) 80 (3.15) (.79) 40 (1.57) 50 (1.97) 7.8 (.31) CLAMP (top & bottom) DIN RAIL 35mm wide2–4.5 (.18) dia. MTG HOLE 15 (.59) deep 8–M3.5 SCREW

• When mounting, no extra space is needed between units. TERMINAL ASSIGNMENTS unit: mm (inch) 2187 12 (.47) INPUT RESISTOR (model: REM) Input shunt resistor attached for current input. SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM SZ R U(+) V(–) Isolation Output Driver Low Drift AmplifierINPUT OUTPUT POWER Base Socket *Input shunt resistor attached for current input. ** Option /E Specifications are subject to change without notice.