SVB-04-P

SVA MSYSTEM | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

MODEL: SVA SVA SPECIFICATIONS ES-1309 Rev.6 Page 1/3 http://www.m-system.co.jp/ Plug-in Signal Conditioners M-UNIT SIGNAL TRANSMITTER (isolated; max. 200 mA output) Functions & Features

• Converting a DC process input into a high-power current or voltage up to 200 mA
• Isolation up to 2000 V AC
• High-density mounting Typical Applications
• Retrofitting 10 – 50 mA DC control system
• DC excitation for an electromagnetic coil which demands a high power (1 .97) 127 (5) (3.15) mm (inch) MODEL: SVA–[1][2]–[3][4]

ORDERING INFORMATION

• Code number: SVA-[1][2]-[3][4] Specify a code from below for each of [1] through [4]. (e.g. SVA-AN-K3/Q)
• Special input and output ranges (For codes Z & 0)
• Specify the specification for option code /Q (e.g. /C01/S01) [1] INPUT Current A: 4 – 20 mA DC (Input resistance 250 Ω) A1: 4 – 20 mA DC (Input resistance 50 Ω) B: 2 – 10 mA DC (Input resistance 500 Ω) C: 1 – 5 mA DC (Input resistance 1000 Ω) D: 0 – 20 mA DC (Input resistance 50 Ω) E: 0 – 16 mA DC (Input resistance 62.5 Ω) F: 0 – 10 mA DC (Input resistance 100 Ω) G: 0 – 1 mA DC (Input resistance 1000 Ω) H: 10 – 50 mA DC (Input resistance 100 Ω) J: 0 – 10 μA DC (Input resistance 1000 Ω) K: 0 – 100 μA DC (Input resistance 1000 Ω) GW: -1 – +1 mA DC (Input resistance 1000 Ω) FW: -10 – +10 mA DC (Input resistance 100 Ω) Z: Specify current (See INPUT SPECIFICATIONS) Voltage 1: 0 – 10 mV DC (Input resistance 10 kΩ min.) 15: 0 – 50 mV DC (Input resistance 10 kΩ min.) 16: 0 – 60 mV DC (Input resistance 10 kΩ min.) 2: 0 – 100 mV DC (Input resistance 100 kΩ min.) 3: 0 – 1 V DC (Input resistance 1 MΩ min.) 4: 0 – 10 V DC (Input resistance 1 MΩ min.) 5: 0 – 5 V DC (Input resistance 1 MΩ min.) 6: 1 – 5 V DC (Input resistance 1 MΩ min.) 4W: -10 – +10 V DC (Input resistance 1 MΩ min.) 5W: -5 – +5 V DC (Input resistance 1 MΩ min.) 0: Specify voltage (See INPUT SPECIFICATIONS) [2] OUTPUT Current H: 10 – 50mA DC (Load resistance 400 Ω max.) L: 0 – 50 mA DC (Load resistance 400 Ω max.) M: 0 – 100 mA DC (Load resistance 200 Ω max.) N: 0 – 200 mA DC (Load resistance 50 Ω max.) Z: Specify current (See OUTPUT SPECIFICATIONS) Voltage 4: 0 – 10 V DC (Load resistance 50 Ω min.) 5: 0 – 5 V DC (Load resistance 25 Ω min.) 6: 1 – 5 V DC (Load resistance 25 Ω min.) 8: 0 – 20 V DC (Load resistance 200 Ω min.) 0: Specify voltage (See OUTPUT SPECIFICATIONS) [3] POWER INPUT AC Power K3: 100 – 120 V AC (Operational voltage range 90 – 132 V, 47 – 66 Hz) L3: 200 – 240 V AC (Operational voltage range 180 – 264 V, 47 – 66 Hz) DC Power P: 110 V DC (Operational voltage range 85 – 150 V, ripple 10 %p-p max.) [4] OPTIONS blank: none /Q: With options (specify the specification) SPECIFICATIONS OF OPTION: Q (multiple selections) COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating TERMINAL SCREW MATERIAL /S01: Stainless steel

MODEL: SVA SVA SPECIFICATIONS ES-1309 Rev.6 Page 2/3 http://www.m-system.co.jp/ GENERAL SPECIFICATIONS Construction: Plug-in Connection: M3.5 screw terminals Screw terminal: Chromated steel (standard) or stainless steel Housing material: Flame-resistant resin (black) Isolation: Input to output to power Overrange output: 0 mA or 0 V up to 105 % of upper range value Zero adjustment: -25 – +25 % no output below 0 mA or 0 V (front) Span adjustment: 50 to 100 % for the rated input span (front) INPUT SPECIFICATIONS ■ DC Current: Shunt resistor attached to the input terminals (0.5 W) Specify input resistance value for code Z. ■ DC Voltage: -30 – +30 V DC Span: Min. 3 mV, max. 30 V Offset: Max. 1.5 times span Input resistance Span 3 – 10 mV : ≥ 10 kΩ Span 10 – 100 mV : ≥ 10 kΩ Span 0.1 – 1 V : ≥ 100 kΩ Span ≥ 1 V : ≥ 1 MΩ OUTPUT SPECIFICATIONS ■ DC Current: 0 – 200 mA DC Minimum span: 20 mA Zero suppression: max. 30 % of span Load inductance: 1 H max. Load resistance Max. current ≤ 100 mA: Output drive max. 20 V 100 mA < max. current ≤ 200 mA: RL [Ω] = 2 [W] / (max. current [A])2 ■ DC Voltage: 0 – 20 V DC Minimum span: 2 V Zero suppression: Max. 30 % of span Load resistance Max. voltage ≤ 10 V: RL [Ω] = max. voltage [V] / 0.2 [A] 10 V < max. voltage ≤ 20V: RL [Ω] = (max. voltage [V])2 / 2 [W] INSTALLATION Power consumption

• AC: Approx. 10 VA, 5 W max.
• DC: ≤ 5 W Operating temperature: -5 to + 50°C (23 to 122°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: Surface or DIN rail Weight: 300 g (0.66 lb) PERFORMANCE in percentage of span Accuracy: ±0.2 % Temp. coefficient: ±0.02 %/°C (±0.01 %/°F) Response time: ≤ 0.5 sec. (0 – 90 %) Load effect Current output: ±0.2 % over load range Voltage output: +0.2 % or -{0.2 + (0.3 [Ω] × max. load [A]) / output span [V] × 100} % over load range Line voltage effect: ±0.2 % over voltage range Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 2000 V AC @1 minute (input to output to power to ground) STANDARDS & APPROVALS EU conformity: EMC Directive EMI EN 61000-6-4 EMS EN 61000-6-2 Low Voltage Directive EN 61010-1 Measurement Category II Pollution Degree 2 Input or output to power: Reinforced insulation (300 V) Input to output: Basic insulation (300 V) RoHS Directive EN 50581

MODEL: SVA SVA SPECIFICATIONS ES-1309 Rev.6 Page 3/3 http://www.m-system.co.jp/ EXTERNAL DIMENSIONS unit: mm (inch) 3456 2187 80 (3.15) 80 (3.15) (.79) 40 (1.57) 50 (1.97) 7.8 (.31) CLAMP (top & bottom) DIN RAIL 35mm wide2–4.5 (.18) dia. MTG HOLE 15 (.59) deep 8–M3.5 SCREW

• When mounting, no extra space is needed between units. TERMINAL ASSIGNMENTS unit: mm (inch) 2187 12 (.47) INPUT RESISTOR (model: REM) Input shunt resistor attached for current input. SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM Isolation Base Socket SZ *Input shunt resistor attached for current input. INPUT

3 Low Drift

U(+) V(–) POWER Specifications are subject to change without notice.