STS12NF30L_0705 STMICROELECTRONICS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 12

Technical content

Datasheet sections

  • 1 Electrical ratings
  • 2 Electrical characteristics
  • 2.1 Electrical characteristics (curves)
  • 3 Test circuit
  • 4 Package mechanical data
  • 5 Revision history

Features

■ Standard outline for easy automated surface mount assembly ■ Low threshold drive

Description

This Power MOSFET is the latest development of STMicroelectronics unique "Single Feature Size™" strip-based process. The resulting transistor shows extremely high packing density for low on-resistance, rugged avalanche characteristics and less critical alignment steps therefore a remarkable manufacturing reproducibility. Application ■ Switching application Internal schematic diagram Type V DSS RDS(on) ID STS12NF30L 30V <0.009 Ω 12A S0-8 Order code Part number Marking Package Packaging STS12NF30L S12NF30L SO-8 Tape & reel

1 Electrical ratings

Table 1. Absolute maximum ratings

  1. Pulse width limited by safe operating area

Table 2. Thermal data

2 Electrical characteristics

Table 3. On/off states Table 4. Dynamic

  1. Pulsed: Pulse duration = 300 µs, duty cycle 1.5.

Table 5. Switching times Table 6. Source drain diode

  1. Pulse width limited by safe operating area.
  2. Pulsed: Pulse duration = 300 µs, duty cycle 1.5%

2.1 Electrical characteri stics (curves)

Figure 1. Safe operating area Figure 2. Thermal impedance Figure 3. Output characteristics Figure 4. Transfer characteristics Figure 5. Transconductance Figure 6. Static drain-source on resistance

3 Test circuit

Figure 12. Switching times test circuit for Figure 13. Gate charge test circuit Figure 14. Test circuit for inductive load Figure 15. Unclamped Inductive load test Figure 16. Unclamped inductive waveform Figure 17. Switching time waveform

4 Package mechanical data

In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com

DIM. mm. inch A 1.75 0.068 a1 0.1 0.25 0.003 0.009 a2 1.65 0.064 a3 0.65 0.85 0.025 0.033 b 0.35 0.48 0.013 0.018 b1 0.19 0.25 0.007 0.010 C 0.25 0.5 0.010 0.019 c1 45 (typ.) D 4.8 5.0 0.188 0.196 E 5.8 6.2 0.228 0.244 e 1.27 0.050 e3 3.81 0.150 F 3.8 4.0 0.14 0.157 L 0.4 1.27 0.015 0.050 M 0.6 0.023 S 8 (max.) SO-8 MECHANICAL DATA

5 Revision history

Table 7. Revision history 31-Jan-2007 8 Typo mistake on Table 1.