STE250NS10_06 STMICROELECTRONICS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 12

Technical content

Datasheet sections

  • 1 Electrical ratings
  • 2 Electrical characteristics
  • 2.1 Electrical characteristics (curves)
  • 3 Test circuit
  • 4 Package mechanical data
  • 5 Revision history

N-channel 100V - 0.0045Ω - 220A - ISOTOP STripFET™ Power MOSFET General features ■ Standard threshold drive ■ 100% avalanche tested

Description

This Power MOSFET is the latest development of STMicroelectronics unique "Single Feature Size™" strip-based process. The resulting transistor shows extremely high packing density for low on-resistance, rugged avalanche characteristics and less critical alignment steps therefore a remarkable manufacturing reproducibility.

Applications

■ Switching application Internal schematic diagram Type V DSS RDS(on) ID STE250NS10 100V <0.0055 Ω 220A ISOTOP Order codes Part number Marking Package Packaging STE250NS10 E250NS10 ISOTOP Tube

1 Electrical ratings

Table 1. Absolute maximum ratings

  1. Pulse width limited by safe operating area
  2. I SD ≤ 220A, di/dt ≤ 200A/µs, VDD ≤ V(BR)DSS, Tj ≤ TJMAX

Table 2. Thermal data Table 3. Avalanche characteristics

2 Electrical characteristics

Table 4. On/off states Table 5. Dynamic Table 6. Switching times

Table 7. Source drain diode

  1. Pulse width limited by safe operating area.
  2. Pulsed: Pulse duration = 300 µs, duty cycle 1.5 %

2.1 Electrical characterist ics (curves)

Figure 1. Safe operating area Figure 2. Thermal impedance Figure 3. Output characterisics Figure 4. Transfer characteristics Figure 5. Transconductance Figure 6. Static drain-source on resistance

3 Test circuit

Figure 13. Switching times test circuit for Figure 14. Gate charge test circuit Figure 15. Test circuit for inductive load Figure 16. Unclamped Inductive load test Figure 17. Unclamped inductive waveform Figure 18. Switching time waveform

4 Package mechanical data

In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at : www.st.com

DIM. mm inch A 11.8 12.2 0.466 0.480 B 8.9 9.1 0.350 0.358 C 1.95 2.05 0.076 0.080 D 0.75 0.85 0.029 0.033 E 12.6 12.8 0.496 0.503 F 25.15 25.5 0.990 1.003 G 31.5 31.7 1.240 1.248 H4 0 . 1 5 7 J 4.1 4.3 0.161 0.169 K 14.9 15.1 0.586 0.594 L 30.1 30.3 1.185 1.193 M 37.8 38.2 1.488 1.503 N4 0 . 1 5 7 O 7.8 8.2 0.307 0.322 B E H O N J K L M F A C G D ISOTOP MECHANICAL DATA

5 Revision history

Table 8. Revision history