ST300C NJSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
Features
Metal case with ceramic insulator International standard case TO-200AC (B-PUK) Typical Applications DC motor controls Controlled DC power supplies AC controllers Major Ratings and Characteristics Parameters T(AV) ®Ths T(RMS; ®Ths ITSM @ SOHZ @60Hz I2t @ 50Hz @ 60Hz V /V DRM HRM t typical L ST300C..L 560 1115 8000 8380 320 292 400 to 2000 100 - 40 to 1 25 Units A nc A A A KA2s KA2s V ps Hockey Puk Version 560A ,_J ^ case style TO-200AC (B-PUK) NJ Semi-Conductors reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by NJ Semi-Conductors is believed to be both accurate and reliable at the time of going to press. However, NJ Semi-Conductors assumes no responsibility for any errors or omissions discovered in its use. NJ Semi-Conductors encourages customers to verify that datasheets are current before placing orders. Quality Semi-Conductors
ST300C..L Series ELECTRICAL SPECIFICATIONS Voltage Ratings Type number ST300C..L Voltage Code VDRM/VRRM' max' repetitive peak and off-state voltage V 400 800 1200 1600 1800 2000 VRSM , maximum non- repetitive peak voltage V 500 900 1300 1700 1900 2100 WHRM max- @ T, = Tj max mA On-state Conduction Parameter IT(AV) Max. average on-state current @ Heatsink temperature 'T(HMSI Max- RMS ""-state current 'TSM Max. peak, one-cycle non-repetitive surge current I2t Maximum I2t for fusing I2\\ Maximum !2Vt for fusing VT 1 Low level value of threshold voltage VT 2 High level value of threshold voltage rn Low level value of on-state slope resistance r,2 High level value of on-state slope resistance VTM Max. on-state voltage IH Maximum holding current IL Typical latching current ST300C..L 560 (275) 55 (75) 1115 8000 8380 6730 7040 320 292 226 207 3200 0.97 0.98 0.74 0.73 2.18 600 1000 Units A A KA2s KA2Vs V mil V mA Conditions 180° conduction, half sine wave double side (single side) cooled DC @ 25°C heatsink temperature double side cooled t = 10ms t = 8.3ms t = 1 0ms t = 8.3ms t = 10ms t = 8.3ms t = 1 0ms t = 8.3ms No voltage reapplied reapplied No voltage reapplied 100%VRRM reapplied Sinusoidal hall wave, Initial Tj = 7^ max. t = 0.1 to 10ms, no voltage reapplied (16.7% x It x IT(AV) < I < ?t x IT|AV(). Tj = Tj max. OX-WVL™, (16.7%x n (I > n x I lpk=1635A x IT(AV) < I < n xl^l.T^Tjmax. V))>Tj = ^ max. Tj = Tj max, t = 10ms sine pulse anode supply 12V resistive load
ST300C..L Series Switching Parameter di/dt Max. non-repetitive rate of rise of turned-on current td Typical delay time t Typical turn-ofl time ST300C..L 1000 1.0 100 Units A/US MS Conditions Gate drive 20V, 20SJ, tf < 1 ps Tj = Tj max, anode voltage < 80% VDHM Gate current 1A, dig/dt ~ 1 A/ps Vd = 0.67%VORM,Tj=25"C ITM = SSOA, Tj = Tj max, di/dt = 40A/ps, VR = 50V dv/dt = 20V/us, Gate 0V 100SL tp = SOOps Blocking Parameter dv/dt Maximum critical rate of rise of off-state voltage IRRM Max. peak reverse and off-state !DnM leakage current ST300C..L 500 Units V/ns mA Conditions Tj = Tj max, linear to 80% rated VDHM Tj = Tj max, rated VDRM/VRRM applied Triggering Parameter PSM Maximum peak gate power PG Av. Maximum average gate power IGM Max. peak positive gate current +VGM Maximum peak positive gate voltage -VGM Maximum peak negative gate voltage LT DC gate current required to trigger VQT DC gate voltage required to trigger IGD DC gate current not to trigger VGD DC gate voltage not to trigger ST300C..L 10.0 2.0 3.0 5.0 TYP. 200 100 2.5 1.8 1.1 MAX. 200 3.0 10.0 0.25 Units w A V mA V mA V Conditions T, = T, max, t < 5ms j j p Tj = Tj max, f = SOHz, d% = 50 T, = T. max. t < 5ms j J p Tj = - 40°C T.= 25°C J Max. required gate trigger/ cur- Tj = 1 25"C rent/ voltage are the lowest value T 4n&r which will trigger all units 12V J anode-to-cathode applied Tj= 25°C Tj = 125°C Max. gate current/voltage not to trigger is the max. value which Tj = L max will not trigger any unit with rated VDnM anode-to-cathode applied
ST300C..L Series Thermal and Mechanical Specification Parameter Td Max. operating temperature range T Max. storage temperature range R,hJ,hs Max. thermal resistance, junction to heatsink R Max. thermal resistance, 1hC-hs case to heatsink F Mounting force, ± 10% wt Approximate weight Case style ST300C..L -40 to 125 -40 to 150 0.11 0.05 0.011 0.006 9800 (1000) 250 Units K/W K/W N (Kg) g TO-200AC(B-PUK) Conditions DC operation single side cooled DC operation double side cooled DC operation single side cooled DC operation double side cooled See Outline Table AR(hJ hs Conduction (The following table shows the increment ot thermal resistence R. . when devices operate at different conduction angles than DC) Conduction angle 180" 120° 90° 60° 30° Sinusoidal conduction Single Side 0.012 0.014 0.018 0.026 0.04S Double Side 0.010 0.015 0.018 0.027 0.046 Rectangular conduction Single Side 0,008 0.014 0.019 0.027 0.046 Double Side 0.008 0.014 0.019 0.028 0.046 Units K/W Conditions Tj - Tj max. Ordering Information Table Device Code ST 30 0 C 20 ©©00® Thyristor Essential part number 0 = Converter grade C = Ceramic Puk Voltage code: Code x 100 = VRRW (See Voltage Rating Table) L = Puk Case TO-200AC (B-PUK) 0 = Eyelet terminals (Gate and Auxiliary Cathode Unsoldered Leads) 1 = Fast-on terminals (Gate and Auxiliary Cathode Unsoldered Leads) 2 = Eyelet terminals (Gate and Auxiliary Cathode Soldered Leads) 3 = Fast-on terminals (Gate and Auxiliary Cathode Soldered Leads) Critical dv/dt: None = 500V/psec (Standard value) L = 1000V/usec (Special selection)
ST300C..L Series Outline Table 0.7 (0.03] HIM. 34 (1.34) DIA. MAX. s 0.7 (0.03) W I r A . TWO PLACES 53 (2.09) DIA. MAX. D
3 PIN RECEPTACLE
6.2 (0.24| HIM. 2 HOLES DIA. 3.5 (0.14) * 25 (0.11 DEEP CREPAGE DISTANCE 36.33 (1.430) WIN. STRIKE DISTANCE 17.43 (0.686] WIN. \\e Style TO-200AC (B-PUK) All dimensions in millimeters (inches) Quote between upper and lower pole pieces has to be considered after application of Mounting Force (see Thermal and Mechanical Specification) 100 200 300 400 Average On-state Current (A) Fig. 1 - Current Ratings Characteristics 500 130 120 110 100 s V \\L Series (Si Rt ,\\0 ngle Side Cooled) hj-hs (DC) = 0.11 V X A 1 1 I one I uct on KA Per I V T 100 200 300 400 500 600 700 Average On-state Current (A) Fig. 2 - Current Ratings Characteristics