PAD1 NJSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
<Semi-(,onau.ctot ^P , One. 20 STERN AVE. SPRINGFIELD, NEW JERSEY 07081 U.S.A. PAD SERIES TELEPHONE: (973) 376-2922 (212)227-6005 FAX: (973) 376-8960 PICO AMPERE DIODES
FEATURES
DIRECT REPLACEMENT FOR SILICONIX PAD SERIES REVERSE BREAKDOWN VOLTAGE REVERSE CAPACITANCE BVR > -30V Crss ^ 2.0pF ABSOLUTE MAXIMUM RATINGS1 @ 25 °C (unless otherwise stated) Maximum Temperatures Storage Temperature Operating Junction Temperature -55to+150°C -55tO+150°C Maximum Power Dissipation Continuous Power Dissipation (PAD) Continuous Power Dissipation (J/SSTPAD) SOOmW 350mW Maximum Currents Forward Current (PAD) Forward Current (J/SSTPAD) 50mA 10mA PAD1,2,5 JPAD PAD50 A & Case SSTPAD cmJ COMMON ELECTRICAL CHARACTERISTICS @ 25 °C (unless otherwise stated) SYMBOL BVR VF t-TSS CHARACTERISTIC Reverse Breakdown Voltage ALL PAD ALL SSTPAD ALL JPAD Forward Voltage Total Reverse Capacitance PAD1.5 All Others MIN -45 -30 -35 TYP 0.8 0.5 1.5 MAX 1.5 0.8 UNITS V pF CONDITIONS IR = -1UA IF = 5mA VR = -5V, f= 1MHz SPECIFIC ELECTRICAL CHARACTERISTICS @ 25 °C (unless otherwise stated) SYMBOL IR CHARACTERISTIC Maximum Reverse Leakage Current PAD1 PAD2 (SST/J)PAD5 (SST/J)PAD10 (SST/J)PAD20 (SST/J)PAD50 (SST/J)PAD100 (SST/J)PAD200 (SST/J)PAD500 PAD -10 -20 -50 -100 JPAD -10 -20 -50 -100 -200 -500 SSTPAD -10 -20 -50 UNITS pA CONDITIONS VR = -20V Derate 2mW/°C above 25°C Derate 2.8mW/°C above 25°C NJ Semi-Conductors reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by NJ Semi-Conductors is believed to be both accurate and reliable at the time of going to press. However, NJ Semi-Conductors assumes no responsibility for any errors or omissions discovered in its use. NJ Semi-Conductors encourages customers to verify that datasheets are current before placing orders. Quality Semi-Conductors
Figure 1. Operational Amplifier Protection Mode Input voltage limited by JPADs D3 and D4 to ±15V. Figure 2. Sample and Hold Circuit voltages fed capacitively from the JFET switch gate.
3 LEADS
- Absolute maximum ratings are limiting values above which serviceability may be impaired.
- The PAD type number denotes its maximum reverse current value in pico amperes. Devices with IR values intermediate to those shown
otherwise under any patent or patent rights of Linear Integrated Systems.