2N4391 CALOGIC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

2N4391 – 2N4393 / PN4391 – PN4393 / SST4391 – SST4393

FEATURES

  • • rds(on)<300 Ohms (2N4391)
  • • ID(OFF)<100pA
  • • Switches ±10VAC With ±15V Supplies (4392, 4393) ABSOLUTE MAXIMUM RATINGS (TA = 25oC unless otherwise noted) TO-18 TO-92 SOT-23 Power Dissipation 1.8W 360mW 350mW Derate above 25oC 10mW/ oC 3.3mW/ oC 2.8mW/ oC Plastic NOTE : Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions above those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

ORDERING INFORMATION

Part Package Temperature Range 2N4391/93 Hermetic TO-18 -55 oC to +200oC PN4391/93 Plastic TO-92 -55 oC to +135oC SST4391/93 Plastic SOT-23 -55 oC to +135oC X2N4391/93 Sorted Chips in Carriers -55oC to +200oC CORPORATION PIN CONFIGURATION DS G TO-92 S TO-18 G,C D 5001 PRODUCT MARKING (SOT-23) SST4391 N01 SST4392 N02 SST4393 N03 SOT-23 G D S D S G TO-92

ELECTRICAL CHARACTERISTICS (TA = 25oC unless otherwise specified) SYMBOL PARAMETER 4391 4392 4393 UNITS TEST CONDITIONS MIN MAX MIN MAX MIN MAX IGSS Gate Reverse Current -100 -100 -100 pA VGS = -20V, VDS = 0 -200 -200 -200 nA TA = 150oC BV GSS Gate-Source Breakdown Voltage-40 -40 -40 V IG = -1µA, VDS = 0 ID(off) Drain Cutoff Current 100 100 100 pA VDS = 20V VGS = -5V (4393) VGS = -7V (4392) 200 200 200 nA VGS = -12V (4391) TA = 150oC VGS(f) Gate-Source Forward Voltage 111 V IG = 1mA, VDS = 0 VGS(off) Gate-Source Cutoff Voltage -4 -10 -2 -5 -0.5 -3 VDS = 20V, ID = 1nA IDSS Saturation Drain Current (Note 1)50 150 25 75 5 30 mA VDS = 20V, VGS = 0 VDS(on) Drain-Source ON Voltage 0.4 0.4 0.4 V VGS = 0 ID = 3mA (4393) ID = 6mA (4392) ID = 12mA (4391) rDS(on) Static Drain-Source ON Resistance 30 60 100 Ω VGS = 0, ID = 1mA rds(on) Drain-Source ON Resistance 30 60 100 VGS = 0, ID = 0 f = 1kHz C iss Common-Source Input Capacitance (Note 2) 14 14 14 pF VDS = 20V, VGS = 0 f = 1MHz C rss Common-Source Reverse Transfer Capacitance (Note 2) 3.5 VDS = 0 VGS = -5V

3.5 VGS = -7V

3.5 VGS = -12V

td Turn-ON Delay Time (Note 2) 15 15 15 ns VDD = 10V, VGS(on) = 0 ID(on) VGS(off) 4391 12mA -12V 4392 6 -7 4393 3 -5 tr Rise Time (Note 2) 555 toff Turn-OFF Delay Time (Note 2) 20 35 50 tf Fall Time (Note 2) 15 20 30 NOTES: 1. Pulse test required, pulse width = 300µs, duty cycle ≤3%. 2.For design reference only, not 100% tested. 2N4391 – 2N4393 / PN4391 – PN4393 SST4391 – SST4393CORPORATION SWITCHING TIMES TEST CIRCUIT 51Ω 51Ω 1 kΩ PULSE IN 51Ω SCOPE VIN 1000pF VOUT R L D = 9.6R L D(ON)I V 0010 - 51Ω DD