J201 CALOGIC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
J201 – J204 / SST201 – SST204
FEATURES
- • High Input Impedance
- • Low IGSS ABSOLUTE MAXIMUM RATINGS (TA = 25oC unless otherwise specified) NOTE: Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions above those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
ORDERING INFORMATION
Part Package Temperature Range J201-204 Plastic TO-92 -55 oC to +135oC SST201-204 Plastic SOT-23 -55 oC to +135oC For Sorted Chips in Carriers see 2N4338 series. CORPORATION PIN CONFIGURATION TO-92 S GD ELECTRICAL CHARACTERISTICS (TA = 25oC unless otherwise specified) SYMBOL PARAMETER 201 202 203 204 UNITS TEST CONDITIONS MIN TYP MAX MIN TYP MAX MIN TYP MAX MIN TYP MAX IGSS Gate Reverse Current (Note 1) -100 -100 -100 -100 pA V DS = 0, VGS = -20V VGS(off) Gate-Source Cutoff V VDS = 20V, ID = 10nA BV GSS Gate-Source Breakdown Voltage -40 -40 -40 -25 V DS = 0, IG = -1µA IDSS Saturation Drain Current IG Gate Current (Note 1) -10 -10 -10 -10 pA V DG = 20V, ID = IDSS(min) gfs Common-Source Forward Transconductance (Note 2)500 1,000 1,500 500 1,500 µs VDS = 20V, VGS = 0 f = 1kHz gos Common-Source Output Conductance 1 3.5 10 2.5 C iss Common-Source Input Capacitance 44 4 4 pF f = 1MHz (Note 3) C rss Common-Source Reverse Transfer Capacitance 11 1 1 en Equivalent Short-Circuit Input Noise Voltage 55 5 1 0 nV √ Hz VDS = 10V, VGS = 0 f = 1kHz (Note 3) NOTES: 1. Approximately doubles for every 10oC increase in TA. 2.Pulse test duration = 2ms. 3.For design reference only, not 100% tested. PRODUCT MARKING (SOT-23) SST201 A01 SST202 A02 SST203 A03 SST204 A04 5010 SOT-23 G S D