SST-12-WS

SST-12-WS LUMINUS | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 15

Technical content

Features

• A round emitter delivers superior beam quality and higher optical efficiency than square emitters for directional lighting applications.
• The vertical chip’s high lumen density reduces the optics’ size while maximizing the intensity and beam distance.
• The phosphor-on-chip technology features high color uniformity over radiation angle, enabling superior light quality for beam spots.
• Maximum Drive Current: 2.4 A
• Color Temperature: 5000K, 5700K, 6500K
• Color Rendering Index: Typ. 70, Min. 65
• Low thermal resistance: 4.9 ° C/W
• ANSI-compatible chromaticity bins
• Electrically isolated thermal path
• 8 kV HBM ESD rating per ANSI/ESDA/JEDEC JS-001

Luminous Flux Chromaticity Bin Kit3 Ordering Part Number Minimum Flux Bin1 Minimum Flux2 Typ. 70 Min. 65 5000K D3 295 lm

501 SST-12-WS50-A2-D3501

502 SST-12-WS50-A2-D3502

501 SST-12-WS50-A2-D4501

502 SST-20-WS50-A2-D4502

571 SST-12-WS57-A2-D3571

572 SST-12-WS57-A2-D3572

571 SST-12-WS57-A2-D4571

572 SST-12-WS57-A2-D4572

651 SST-12-WS65-A2-D4651

652 SST-12-WS65-A2-D4652

651 SST-12-WS65-A2-D5651

652 SST-12-WS65-A2-D5652

Ordering Information

2PDS-003348 Rev 02 www.luminus.com Note: 1. The Ordering Part Number specifies the Minimum Flux Bin in shipment; higher flux bins may be shipped without advance notice. Please refer to ‘Luminous Flux Binning’ table for details of all flux bins. 2. Product test condition: If =700 mA, Tj=85°C. 3. Shipments always adhere to the color bins specified in each Chromaticity Bin Kit. See ‘Chromaticity Bin Kit Codes’ table for the color bins included in each Bin Kit. Product Family Chip Area Color Package Configuration Bin Kit S: Surface Mount S: Dome Lensed T: Single Emitter 12: 1.2 mm2 W: White <x> CRI Category Code S: CRI>65 <yy> Color Temperature 50: 5000K 65: 6500K <p> Solder Pad Configuration A: type A - see page 11 <#> Chip Generation 2: Gen 2 <ff> Minimum Flux Bin, see ‘Luminus Flux Binning’ table for details <ccc> Chromaticity Bin Kit, see ‘Chromaticity Bin Kit Codes’ table for details Part Number Nomenclature

Binning @ 700 mA Correlated Minimum Flux (lm) @ Tj=85°C2 Tj= 85°C1 Tj= 25°C Minimum Flux (lm) Maximum Flux (lm) Minimum Flux (lm) 350 mA 1000 mA 1800 mA 2400 mA D2 280 295 314 154 378 594 722 D3 295 310 330 162 398 625 761 D4 310 325 347 171 419 657 800 D5 325 340 364 179 439 689 839 D6 340 355 381 187 459 721 877 Luminous Flux Binning1,2 Voltage Bin Code3 Binning @ 700 mA, Tj= 85°C Minimum Voltage (V) Maximum Voltage (V) VJ 2.7 2.9 VK 2.9 3.1 Note: 1. LEDs are measured at 25°C ambient temperature with 700 mA 20 ms single pulse. The measured values are correlated to values at 85°C junction temperature (Tj). Luminus maintains a ±6% tolerance on flux measurement. 2. Flux values at other junction temperature (Tj) and/or forward current conditions are calculated and for reference only. 3. Individual voltage bins are not orderable. Forward Voltage Binning3 SST -12-WS Gen 2 Product Datasheet 3PDS-003348 Rev 02 www.luminus.com Binning Structure

4PDS-003348 Rev 02 www.luminus.com Binning Structure Chromaticity Binning Coordinates CCT Bin Code CIEx CIEy Bin Code CIEx CIEy Bin Code CIEx CIEy Bin Code CIEx CIEy 5000K DA 0.3371 0.3490 DB 0.3376 0.3616 DC 0.3463 0.3687 DD 0.3451 0.3554 DH 0.3366 0.3369 DE 0.3381 0.3762 DF 0.3480 0.3840 DG 0.3440 0.3428 5700K CA 0.3215 0.3350 CB 0.3207 0.3462 CC 0.3290 0.3538 CD 0.3290 0.3417 CH 0.3222 0.3243 CE 0.3196 0.3602 CF 0.3290 0.3690 CG 0.3290 0.3300 6500K BA 0.3048 0.3207 BB 0.3028 0.3304 BC 0.3115 0.3391 BD 0.3130 0.3290 BH 0.3068 0.3113 BE 0.3005 0.3415 BF 0.3099 0.3509 BG 0.3144 0.3186

5PDS-003348 Rev 02 www.luminus.com Binning Structure Chromaticity Binning Diagram1,2 Note: 1. LED chromaticity is measured and binned at 25°C ambient temperature with 700 mA 20 ms single pulse. 2. Luminus maintains a tolerance of ±0.005 on Chromaticity (CIEx, CIEy) measurement. CCT Bin Kit Chromaticity Bins 5000K

501 DA, DB, DC, DD, DE, DF, DG, DH

502 DA, DB, DC, DD

571 CA, CB, CC, CD, CE, CF, CG, CH

572 CA, CB, CC, CD

651 BA, BB, BC, BD, BE, BF, BG, BH

652 BA, BB, BC, BD

Chromaticity Bin Kit Codes

Tj=130°C Tj=150°C DC Forward Current Minimum If min 0.1 A Maximum If max 2.4 1.8 A Surge Current (t<10 ms, Duty Cycle < 10%) Is max 3.6 2.5 A Power Dissipation PD 8.0 6.0 W Reverse Voltage (@ If= 10 mA) Vr 5 V Junction Temperature Tj max 150 °C Operating Temperature Topr -40 to 100 °C Storage Temperature Tstg -40 to 100 °C ESD withstand Voltage HBM Per ANSI/ESDA/JEDEC JS-001 VHBM 8 kV ESD withstand Voltage CDM Per ANSI/ESDA/JEDEC JS-002 VCDM 1 kV SST -12-WS Gen 2 Product Datasheet 6PDS-003348 Rev 02 www.luminus.com Product Characteristics Parameter Symbol Value Unit Color Rendering Index1 (Tj=85°C) Minimum CRImin 65 Typical CRItyp 70 Viewing Angle (FWHM) 2θ1/2 120 ° Forward Voltage (If =700 mA, Tj = 85°C) Minimum Vf min 2.7 VTypical Vf typ 2.9 Maximum Vf max 3.1 Temperature Coefficient of Voltage ∂Vf/∂T -1.4 mV/°C Thermal Resistance (Electrical) Junction/Solder Point Rthjs-EL 4.9 °C/W Note: 1. Luminus maintains a tolerance of ±2 on Color Rendering Index (CRI) measurement.

Maximum Permissible DC Current vs. Junction Temperature 7PDS-003348 Rev 02 www.luminus.com

Forward Current: φv/φv(0.7 A), Tj= 85°C Temperature (Tj): φv/φv(85°C), If = 0.7 A Forward Voltage Forward Current: ΔVf = Vf(If)- Vf(0.7 A), Tj = 85°C Temperature (Tj): ΔVf = Vf(Tj) - Vf(85°C), If = 0.7 A Relative Chromaticity Forward Current: ΔCIEx,y= CIEx,y(If) - CIEx,y(0.7 A), Tj = 85°C Temperature (Tj): ΔCIEx,y= CIEx,y(Tj) - CIEx,y(25°C), If = 0.7 A 8PDS-003348 Rev 02 www.luminus.com

Relative Spectral Power Distribution If = 0.7 A; Tj = 25°C If = 0.7 A; Tj = 85°C 9PDS-003348 Rev 02 www.luminus.com

10PDS-003348 Rev 02 www.luminus.com Soldering Profile SMT Rework Guideline Manual Hotplate Reflow Hot Air Gun Reflow Heating Time < 60 sec Hotplate Temperature < 245°C < 150°C Note: 1. Product complies to Moisture Sensitivity Level 3 (MSL 3). 2. The numbers in the table are specific to SAC305. Luminus recommends using an SAC305 solder paste with a no-clean flux for RoHS compliant products. 3. During the pick and place process, axial forces on the dome (or window) should not exceed 0.5 Newtons (N). 4. Use of a multi-zone IR reflow oven with a nitrogen blanket is recommended. 5. Time-temperature profile of the reflow process showing the four functional profile zones are defined in IPC-7801. Temperature is referenced to the center of the PCB. 6. Luminus recommends to use the solder paste data sheet information as a starting point in time-temperature process development. 7. These are general guidelines. Consult the solder paste manufacturer’s datasheet for guidelines specific to the alloy and flux combination used in your application. For more information, please refer to: https://luminusdevices.zendesk.com/hc/en-us/articles/360060306692-How-do-I-Reflow-Solder-Luminus-SMD-Components- 8. For any technical questions about soldering process, please contact Luminus at techsupport@luminus.com. Temperature Time Preheat RT to 150°C 1 - 2.5°C/sec Soak 150°C to 180°C 0.4 - 1°C/sec Reflow 180 to TL + 20°C 3 - 6°C/sec Cool down Peak to below 150°C 3 - 7°C/sec Liquidus Temperature, TL (SAC305 = 220°C) Peak Temperature (235 - 245°C) Time Above Liquidus (45 - 90 sec) 65 -> 200°C, 120 - 250 sec max

11PDS-003348 Rev 02 www.luminus.com Note: 1. All dimensions are in millimeter ± 0.13 mm 3.45 3.45 FRONT VIEW OPTICAL REFERENCE ANODE 0.68 0.45 R1.30 1.98 3.25 2.30 2X0.50 2X0.48 3.25 1.30 ANODE CATHODE SIDE VIEW BACK VIEW D C B AA B C D 12345678 8 7 6 5 4 3 2 1 25:1 DRAWING,003098,OUTLINE,SST-20-W-A120 X.XIE

1145 SONORA COURT

SUNNYVALE, CA 94086 408-708-7000 DESCRIPTION: 01ALL MEASUREMENTS AER 0.13mm UNLESS OTHERWISE SPECIFIED TOLERANCES ARE MILLIMETERS [INCHES] This document and its contents are confidential information of Luminus Devices, Inc. Copyright 2005 Luminus Device,Inc. All rights reserved. B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: PROPRIETARY AND CONFIDENTIAL DWG-003098 0.50 0.48 3.25 3.25 0.48 0.58 0.75 0.25 3.25 1.15 2.30 3.25 1.30 Recommended PCB Solder Pad Recommended Stencil Pattern D C B AA B C D 12345678 8 7 6 5 4 3 2 1 25:1 DRAWING,OUTLINE,SST-20-W-A120 X.XIE SUNNYVALE, CA 94086 408-708-7000 DESCRIPTION: P01MILLIMETERS [INCHES] This document and its contents are confidential information of Luminus Devices, Inc. Copyright 2005 Luminus Device,Inc. All rights reserved. B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: PROPRIETARY AND CONFIDENTIAL ALL MEASUREMENTS AER 0.13mm UNLESS OTHERWISE SPECIFIED TOLERANCES ARE 0.50 0.48 3.25 3.25 0.48 0.58 0.75 0.25 3.25 1.15 2.30 3.25 1.30 Recommended PCB Solder Pad Recommended Stencil Pattern D C B AA B C D 12345678 8 7 6 5 4 3 2 1 25:1 DRAWING,OUTLINE,SST-20-W-A120 X.XIE SUNNYVALE, CA 94086 408-708-7000 DESCRIPTION: P01MILLIMETERS [INCHES] This document and its contents are confidential information of Luminus Devices, Inc. Copyright 2005 Luminus Device,Inc. All rights reserved. B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: PROPRIETARY AND CONFIDENTIAL ALL MEASUREMENTS AER 0.13mm UNLESS OTHERWISE SPECIFIED TOLERANCES ARE 3.45+ 0.20 0.00 3.45+ 0.20 0.00 CENTER OF DIE EMITTING AREA R1.30 0.70 2.00±0.10 1.30 0.48 0.48 3.25 2.30 0.10 0.10 ANODECATHODE REVISIONS ECO REV. DESCRIPTION DATE APPROVED A 3/12/2018 D C B AA B C D 12345678 8 7 6 5 4 3 2 1 X = 0.5mm .X = 0.127mm .XX = 0.050mm .XXX = 0.010mm NONE DRAWING, OUTLINE,003147,SST,12,WXX,A120 X.XIE SUNNYVALE, CA 94086 408-708-7000 DESCRIPTION: A SURFACES

0.8 MICRONS

UNLESS OTHERWISE SPECIFIED TOLERANCES ARE MILLIMETERS [INCHES] This document and its contents are confidential information of Luminus Devices, Inc. Copyright 2005 Luminus Device,Inc. All rights reserved. B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:1 OF 2DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: DWG-003147 ANGLES 0.5 PROPRIETARY AND CONFIDENTIAL

12PDS-003348 Rev 02 www.luminus.com SST-20-W Product Datasheet Preliminary PDS-002946 Rev03 Draft01 © 2017 Luminus Devices, Inc. - All Rights Reserved

1145 Sonora Court Sunnyvale, CA 94086 USA

Note 1: Dimensions are in millimeters &$7+2'(6,'( $12'(6,'( 6(&7,21$$ 6(&7,21%% 7239,(: '(7$,/' '(7$,/& 127(6 (037<32&.(76 (037<32&.(76 0867&203/<72(,$& 815((/,1*',5(&7,21 815((/,1*',5(&7,21 Tape and Reel - A120 and B120 Package Configurations1 SST-20-W Product Datasheet Preliminary PDS-002946 Rev03 Draft01 © 2017 Luminus Devices, Inc. - All Rights Reserved Note 1: Dimensions are in millimeters &$7+2'(6,'( $12'(6,'( 6(&7,21$$ 6(&7,21%% 7239,(: '(7$,/' '(7$,/& 127(6 (037<32&.(76 (037<32&.(76 0867&203/<72(,$& 815((/,1*',5(&7,21 815((/,1*',5(&7,21 Tape and Reel - A120 and B120 Package Configurations1 Note: 1. Each reel contains 1,000 units. 2. Leave 160 mm of type empty for lead in (20 empty pockets). 3. Leave 480 mm of type empty for trailer (60 empty pockets). 4. Must comply to EIA-481-C-2003. 5. Final tape and reel packaging must meet the requirements of JEDEC-STD-033, LEVEL 2A. SST-20-W Product Datasheet Preliminary PDS-002946 Rev03 Draft01 © 2017 Luminus Devices, Inc. - All Rights Reserved Note 1: Dimensions are in millimeters &$7+2'(6,'( $12'(6,'( 6(&7,21$$ 6(&7,21%% 7239,(: '(7$,/' '(7$,/& 127(6 (037<32&.(76 (037<32&.(76 0867&203/<72(,$& 815((/,1*',5(&7,21 815((/,1*',5(&7,21 Tape and Reel - A120 and B120 Package Configurations1

Label Fields: CPN: Luminus ordering part number CID: Customer’s part number QTY: Quantity of parts per reel Flux: Bin as defined on page 3 Voltage: Bin as defined on page 3 Color: Bin as defined on page 4 CRI: NA Lot ID & Reel ID: For Luminus internal use XXX-XX-XXXX-XXXX-XXXXXXXXX Reel ID 13PDS-003348 Rev 02 www.luminus.com XXX Label on Reel Label on Packaging Box XXXXXX XXX-XXX-XXXX-XXXX XXX Label Fields: CPN: Luminus ordering part number MPN: For Luminus internal use QTY: Quantity of parts per reel Flux: Bin as defined on page 3 Voltage: Bin as defined on page 3 Color: Bin as defined on page 4 CRI: NA Lot ID & Reel ID: For Luminus internal use

14PDS-003348 Rev 02 www.luminus.com Humidity Card (bag) Desiccant (bag) Vacuum sealed antistatic bag Label: contains the type, Lot #, Quality, Product parameters Humidity card (bag) Desiccant (bag) Vacuum sealed anti-static bag Label contains the type, lot number, quantity and product parameters *Capacity 5 reels per box *Capacity 10 reels per box Label: contains the type, Lot #, Quality, Product parameters Box Size 1 - 5 reels per box Size: 22.5 x 24.5 x 6.5 cm Capacity: Label contains the type, lot number, quantity and product parameters Label contains the type, lot number, quantity and product parameters Box Size 2 - 10 reels per box Size: 22.5 x 24.5 x 13 cm Capacity Packaged Reel Packaging boxes Packing Configuration:

• 1,000 units per reel
• Each reel is enclosed in anti-static bag
• Shipping label is placed on top of each reel
• Multiple labels are attached to the box (one label per reel inside the box)

15PDS-003348 Rev 02 www.luminus.com Static Electricity 1. The products are sensitive to static electricity, and care should be taken when handling them. 2. Static electricity or surge voltage will damage the LEDs. It is recommended to wear anti-electrostatic gloves or wristband when handling the LEDs. 3. All devices, equipment and machinery must be properly grounded. It is recommended that measures be taken against surge voltage to the equipment that mounts the LEDs. Reference: APN-002815 Electrical Stress Damage to LEDs and How to Prevent It Storage 1. Before opening the package The LEDs should be kept at a temperature lower than 40°C and relative humidity lower than 90%. The LEDs should be used within a year. When storing the LEDs, moisture proof package with absorbent material (silica gel) is recommended. 2. After opening the package The LEDs should be kept at a temperature lower than 30°C and relative humidity lower than 60%. The LEDs should be soldered within 168 hours (7 days) after opening the moisture proof package. If unused LEDs remain, they should be stored in moisture proof packages, such as sealed containers with moisture absorbent material (silica gel). It is also recommended to return the unused LEDs to the original moisture proof package and to seal it again. If the moisture absorbent material (silica gel) vaporizes or passes the expiration date, baking treatment should be performed by using the following conditions : 60°C for 20 hours. The LED’s electrode and lead frame comprise a silver plated copper alloy. The silver surface may be affected by environments. Please avoid conditions which may cause the LEDs to corrode or discolor. The corrosion or discoloration might lower solderability or affect optical characteristics. Please avoid rapid transition in ambient temperature, especially in high humidity environments where condensation can occur.