SST-12-WH40-A2-B6401

SST-12-WH LUMINUS | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 15

Technical content

Features

• A round emitter delivers superior beam quality and higher optical efficiency than square emitters for directional lighting applications.
• The vertical chip’s high lumen density reduces the optics’ size while maximizing the intensity and beam distance.
• The phosphor-on-chip technology features high color uniformity over radiation angle, enabling superior light quality for beam spots.
• Maximum Drive Current: 1.5 A
• Color Temperature: 2700K, 3000K, 3500K, 4000K
• Color Rendering Index: > 95
• Low thermal resistance: 4.9°C/W
• ANSI-compatible chromaticity bins
• Electrically isolated thermal path
• 8 kV HBM ESD rating per ANSI/ESDA/JEDEC JS-001

Luminous Flux Chromaticity Bin Kit3 Ordering Part Number Minimum Flux Bin1 Minimum Flux2 > 95 2700K B2 100 lm

271 SST-12-WH27-A2-B2271

272 SST-12-WH27-A2-B2272

271 SST-12-WH27-A2-B3271

272 SST-12-WH27-A2-B3272

301 SST-12-WH30-A2-B3301

302 SST-12-WH30-A2-B3302

301 SST-12-WH30-A2-B4301

302 SST-12-WH30-A2-B4302

351 SST-12-WH35-A2-B4351

352 SST-12-WH35-A2-B4352

351 SST-12-WH35-A2-B5351

352 SST-12-WH35-A2-B5352

401 SST-12-WH40-A2-B5401

402 SST-12-WH40-A2-B5402

401 SST-12-WH40-A2-B6401

402 SST-12-WH40-A2-B6402

Ordering Information

2PDS-003349 Rev 02 www.luminus.com Note: 1. The Ordering Part Number specifies the Minimum Flux Bin in shipment; higher flux bins may be shipped without advance notice. Please refer to ‘Luminous Flux Binning’ table for details of all flux bins. 2. Product test condition: If =350 mA, Tj=85°C. 3. Shipments always adhere to the color bins specified in each Chromaticity Bin Kit. See ‘Chromaticity Bin Kit Codes’ table for the color bins included in each Bin Kit. Product Family Chip Area Color Package Configuration Bin Kit S: Surface Mount S: Dome Lensed T: Single Emitter 12: 1.2 mm2 W: White <x> CRI Category Code H: CRI>95 <yy> Color Temperature 27: 2700K 40: 4000K <p> Solder Pad Configuration A: type A - see page 11 <#> Chip Generation 2: Gen 2 <ff> Minimum Flux Bin, see ‘Luminus Flux Binning’ table for details <ccc> Chromaticity Bin Kit, see ‘Chromaticity Bin Kit Codes’ table for details Part Number Nomenclature

Binning @ 350 mA Correlated Minimum Flux (lm) @ Tj=85°C2 Tj= 85°C1 Tj= 25°C Minimum Flux (lm) Maximum Flux (lm) Minimum Flux (lm) 700 mA 1000 mA 1500 mA B1 95 100 106 172 231 315 B2 100 107 112 181 243 332 B3 107 114 120 194 260 355 B4 114 121 128 206 277 378 B5 121 128 136 219 294 402 B6 128 135 143 232 311 425 B7 135 142 151 244 328 448 Luminous Flux Binning1,2 Voltage Bin Code3 Binning @ 350 mA, Tj= 85°C Minimum Voltage (V) Maximum Voltage (V) VH 2.5 2.7 VJ 2.7 2.9 Note: 1. LEDs are measured at 25°C ambient temperature with 350 mA 20 ms single pulse. The measured values are correlated to values at 85°C junction temperature (Tj). Luminus maintains a ±6% tolerance on flux measurement. 2. Flux values at other junction temperature (Tj) and/or forward current conditions are calculated and for reference only. 3. Individual voltage bins are not orderable. Forward Voltage Binning3 SST -12-WH Gen 2 Product Datasheet 3PDS-003349 Rev 02 www.luminus.com Binning Structure

4PDS-003349 Rev 02 www.luminus.com Binning Structure CCT Bin Code CIEx CIEy Bin Code CIEx CIEy Bin Code CIEx CIEy Bin Code CIEx CIEy 2700K JA1 0.4373 0.3893 JA2 0.4418 0.3981 JA3 0.4475 0.3994 JA4 0.4428 0.3906 JB1 0.4465 0.4071 JB2 0.4513 0.4164 JB3 0.4573 0.4178 JB4 0.4523 0.4085 JC1 0.4582 0.4099 JC2 0.4634 0.4193 JC3 0.4695 0.4207 JC4 0.4641 0.4112 JD1 0.4483 0.3919 JD2 0.4532 0.4008 JD3 0.4589 0.4021 JD4 0.4538 0.3931 3000K HA1 0.4147 0.3814 HA2 0.4183 0.3898 HA3 0.4242 0.3919 HA4 0.4203 0.3833 HB1 0.4221 0.3984 HB2 0.4259 0,4006 HB3 0.4322 0.4096 HB4 0.4281 0.4006 HC1 0.4342 0.4119 HC2 0.4385 0.4119 HC3 0.4449 0.4141 HC4 0.4403 0.4049 HD1 0.4259 0.3939 HD2 0.4300 0.3939 HD3 0.4359 0.3960 HD4 0.4316 0.3873 Chromaticity Binning Coordinates

5PDS-003349 Rev 02 www.luminus.com Binning Structure CCT Bin Code CIEx CIEy Bin Code CIEx CIEy Bin Code CIEx CIEy Bin Code CIEx CIEy 3500K GA1 0.3889 0.3690 GA2 0.3915 0.3768 GA3 0.3981 0.3800 GA4 0.3953 0.3720 GB1 0.3941 0.3848 GB2 0.3968 0.3930 GB3 0.4040 0.3966 GB4 0.4010 0.3882 GC1 0.4080 0.3916 GC2 0.4113 0.4001 GC3 0.4186 0.4037 GC4 0.4150 0.3950 GD1 0.4017 0.3751 GD2 0.4048 0.3832 GD3 0.4116 0.3865 GD4 0.4082 0.3782 4000K FA1 0.3670 0.3578 FA2 0.3686 0.3649 FA3 0.3744 0.3685 FA4 0.3726 0.3612 FB1 0.3702 0.3722 FB2 0.3719 0.3797 FB3 0.3782 0.3837 FB4 0.3763 0.3760 FC1 0.3825 0.3798 FC2 0.3847 0.3877 FC3 0.3912 0.3917 FC4 0.3887 0.3836 FD1 0.3783 0.3646 FD2 0.3804 0.3721 FD3 0.3863 0.3758 FD4 0.3840 0.3681 Chromaticity Binning Coordinates

6PDS-003349 Rev 02 www.luminus.com Binning Structure Chromaticity Binning Diagram1,2 Note: 1. LED chromaticity is measured and binned at 25°C ambient temperature with 350 mA 20 ms single pulse. 2. Luminus maintains a tolerance of ±0.005 on Chromaticity (CIEx, CIEy) measurement. CCT Bin Kit Chromaticity Bins 2700K

271 JA1, JA2, JA3, JA4, JB1, JB2, JB3, JB4,

JC1, JC2, JC3, JC4, JD1, JD2, JD3, JD4

272 JA3, JB4, JC1, JD2

301 HA1, HA2, HA3, HA4, HB1, HB2, HB3, HB4

HC1, HC2, HC3, HC4, HD1, HD2, HD3, HD4

302 HA3, HB4, HC1, HD2

351 GA1, GA2, GA3, GA4, GB1, GB2, GB3, GB4,

GC1, GC2, GC3, GC4, GD1, GD2, GD3, GD4

352 GA3, GB4, GC1, GD2

401 FA1, FA2, FA3, FA4, FB1, FB2, FB3, FB4,

FC1,FC2, FC3, FC4, FD1, FD2, FD3, FD4

402 FA3, FB4, FC1, FD2

Chromaticity Bin Kit Codes

Minimum If min 0.1 A Maximum If max 1.5 Surge Current (t<10 ms, Duty Cycle < 10%) Is max 2.5 A Reverse Voltage (@ If= 10 mA) Vr 5 V Power Dissipation PD 5 W Junction Temperature Tj max 150 °C Operating Temperature Topr -40 to 100 °C Storage Temperature Tstg -40 to 100 °C ESD withstand Voltage HBM Per ANSI/ESDA/JEDEC JS-001 VHBM 8 kV ESD withstand Voltage CDM Per ANSI/ESDA/JEDEC JS-002 VCDM 1 kV SST -12-WH Gen 2 Product Datasheet 7PDS-003349 Rev 02 www.luminus.com Product Characteristics Parameter Symbol Value Unit Color Rendering Index1 (Tj=85°C) CRI > 95 Color Rendering, R9 (Tj = 85°C) R9min > 50 Viewing Angle (FWHM) 2θ1/2 120 ° Forward Voltage (If =350 mA, Tj = 85°C) Minimum Vf min 2.5 VTypical Vf typ 2.7 Maximum Vf max 2.9 Temperature Coefficient of Voltage ∂Vf/∂T -1.14 mV/°C Thermal Resistance (Electrical) Junction/Solder Point Rthjs-EL 4.9 °C/W Note: 1. Luminus maintains a tolerance of ±2 on Color Rendering Index (CRI) measurement.

Forward Current: φv/φv(0.35 A), Tj= 85°C Temperature (Tj): φv/φv(85°C), If = 0.35 A Forward Voltage Forward Current: ΔVf = Vf(If)- Vf(0.35 A), Tj = 85°C Temperature (Tj): ΔVf = Vf(Tj) - Vf(85°C), If = 0.35 A Relative Chromaticity Forward Current: ΔCIEx,y= CIEx,y(If) - CIEx,y(0.35 A), Tj = 85°C Temperature (Tj): ΔCIEx,y= CIEx,y(Tj) - CIEx,y(25°C), If = 0.35 A 8PDS-003349 Rev 02 www.luminus.com

Relative Spectral Power Distribution If = 0.35 A; Tj = 25°C If = 0.35 A; Tj = 85°C 9PDS-003349 Rev 02 www.luminus.com

10PDS-003349 Rev 02 www.luminus.com Soldering Profile SMT Rework Guideline Manual Hotplate Reflow Hot Air Gun Reflow Heating Time < 60 sec Hotplate Temperature < 245°C < 150°C Note: 1. Product complies to Moisture Sensitivity Level 3 (MSL 3). 2. The numbers in the table are specific to SAC305. Luminus recommends using an SAC305 solder paste with a no-clean flux for RoHS compliant products. 3. During the pick and place process, axial forces on the dome (or window) should not exceed 0.5 Newtons (N). 4. Use of a multi-zone IR reflow oven with a nitrogen blanket is recommended. 5. Time-temperature profile of the reflow process showing the four functional profile zones are defined in IPC-7801. Temperature is referenced to the center of the PCB. 6. Luminus recommends to use the solder paste data sheet information as a starting point in time-temperature process development. 7. These are general guidelines. Consult the solder paste manufacturer’s datasheet for guidelines specific to the alloy and flux combination used in your application. For more information, please refer to: https://luminusdevices.zendesk.com/hc/en-us/articles/360060306692-How-do-I-Reflow-Solder-Luminus-SMD-Components- 8. For any technical questions about soldering process, please contact Luminus at techsupport@luminus.com. Temperature Time Preheat RT to 150°C 1 - 2.5°C/sec Soak 150°C to 180°C 0.4 - 1°C/sec Reflow 180 to TL + 20°C 3 - 6°C/sec Cool down Peak to below 150°C 3 - 7°C/sec Liquidus Temperature, TL (SAC305 = 220°C) Peak Temperature (235 - 245°C) Time Above Liquidus (45 - 90 sec) 65 -> 200°C, 120 - 250 sec max

11PDS-003349 Rev 02 www.luminus.com Note: 1. All dimensions are in millimeter ± 0.13 mm 3.45 3.45 FRONT VIEW OPTICAL REFERENCE ANODE 0.68 0.45 R1.30 1.98 3.25 2.30 2X0.50 2X0.48 3.25 1.30 ANODE CATHODE SIDE VIEW BACK VIEW D C B AA B C D 12345678 8 7 6 5 4 3 2 1 25:1 DRAWING,003098,OUTLINE,SST-20-W-A120 X.XIE

1145 SONORA COURT

SUNNYVALE, CA 94086 408-708-7000 DESCRIPTION: 01ALL MEASUREMENTS AER 0.13mm UNLESS OTHERWISE SPECIFIED TOLERANCES ARE MILLIMETERS [INCHES] This document and its contents are confidential information of Luminus Devices, Inc. Copyright 2005 Luminus Device,Inc. All rights reserved. B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: PROPRIETARY AND CONFIDENTIAL DWG-003098 0.50 0.48 3.25 3.25 0.48 0.58 0.75 0.25 3.25 1.15 2.30 3.25 1.30 Recommended PCB Solder Pad Recommended Stencil Pattern D C B AA B C D 12345678 8 7 6 5 4 3 2 1 25:1 DRAWING,OUTLINE,SST-20-W-A120 X.XIE SUNNYVALE, CA 94086 408-708-7000 DESCRIPTION: P01MILLIMETERS [INCHES] This document and its contents are confidential information of Luminus Devices, Inc. Copyright 2005 Luminus Device,Inc. All rights reserved. B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: PROPRIETARY AND CONFIDENTIAL ALL MEASUREMENTS AER 0.13mm UNLESS OTHERWISE SPECIFIED TOLERANCES ARE 0.50 0.48 3.25 3.25 0.48 0.58 0.75 0.25 3.25 1.15 2.30 3.25 1.30 Recommended PCB Solder Pad Recommended Stencil Pattern D C B AA B C D 12345678 8 7 6 5 4 3 2 1 25:1 DRAWING,OUTLINE,SST-20-W-A120 X.XIE SUNNYVALE, CA 94086 408-708-7000 DESCRIPTION: P01MILLIMETERS [INCHES] This document and its contents are confidential information of Luminus Devices, Inc. Copyright 2005 Luminus Device,Inc. All rights reserved. B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: PROPRIETARY AND CONFIDENTIAL ALL MEASUREMENTS AER 0.13mm UNLESS OTHERWISE SPECIFIED TOLERANCES ARE 3.45+ 0.20 0.00 3.45+ 0.20 0.00 CENTER OF DIE EMITTING AREA R1.30 0.70 2.00±0.10 1.30 0.48 0.48 3.25 2.30 0.10 0.10 ANODECATHODE REVISIONS ECO REV. DESCRIPTION DATE APPROVED A 3/12/2018 D C B AA B C D 12345678 8 7 6 5 4 3 2 1 X = 0.5mm .X = 0.127mm .XX = 0.050mm .XXX = 0.010mm NONE DRAWING, OUTLINE,003147,SST,12,WXX,A120 X.XIE SUNNYVALE, CA 94086 408-708-7000 DESCRIPTION: A SURFACES

0.8 MICRONS

UNLESS OTHERWISE SPECIFIED TOLERANCES ARE MILLIMETERS [INCHES] This document and its contents are confidential information of Luminus Devices, Inc. Copyright 2005 Luminus Device,Inc. All rights reserved. B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:1 OF 2DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: DWG-003147 ANGLES 0.5 PROPRIETARY AND CONFIDENTIAL

12PDS-003349 Rev 02 www.luminus.com SST-20-W Product Datasheet Preliminary PDS-002946 Rev03 Draft01 © 2017 Luminus Devices, Inc. - All Rights Reserved

1145 Sonora Court Sunnyvale, CA 94086 USA

Note 1: Dimensions are in millimeters &$7+2'(6,'( $12'(6,'( 6(&7,21$$ 6(&7,21%% 7239,(: '(7$,/' '(7$,/& 127(6 (037<32&.(76 (037<32&.(76 0867&203/<72(,$& 815((/,1*',5(&7,21 815((/,1*',5(&7,21 Tape and Reel - A120 and B120 Package Configurations1 SST-20-W Product Datasheet Preliminary PDS-002946 Rev03 Draft01 © 2017 Luminus Devices, Inc. - All Rights Reserved Note 1: Dimensions are in millimeters &$7+2'(6,'( $12'(6,'( 6(&7,21$$ 6(&7,21%% 7239,(: '(7$,/' '(7$,/& 127(6 (037<32&.(76 (037<32&.(76 0867&203/<72(,$& 815((/,1*',5(&7,21 815((/,1*',5(&7,21 Tape and Reel - A120 and B120 Package Configurations1 Note: 1. Each reel contains 1,000 units. 2. Leave 160 mm of type empty for lead in (20 empty pockets). 3. Leave 480 mm of type empty for trailer (60 empty pockets). 4. Must comply to EIA-481-C-2003. 5. Final tape and reel packaging must meet the requirements of JEDEC-STD-033, LEVEL 2A. SST-20-W Product Datasheet Preliminary PDS-002946 Rev03 Draft01 © 2017 Luminus Devices, Inc. - All Rights Reserved Note 1: Dimensions are in millimeters &$7+2'(6,'( $12'(6,'( 6(&7,21$$ 6(&7,21%% 7239,(: '(7$,/' '(7$,/& 127(6 (037<32&.(76 (037<32&.(76 0867&203/<72(,$& 815((/,1*',5(&7,21 815((/,1*',5(&7,21 Tape and Reel - A120 and B120 Package Configurations1

Label Fields: CPN: Luminus ordering part number CID: Customer’s part number QTY: Quantity of parts per reel Flux: Bin as defined on page 3 Voltage: Bin as defined on page 3 Color: Bin as defined on page 4 & 5 CRI: NA Lot ID & Reel ID: For Luminus internal use XXX-XX-XXXX-XXXX-XXXXXXXXX Reel ID 13PDS-003349 Rev 02 www.luminus.com XXX Label on Reel Label on Packaging Box XXXXXX XXX-XXX-XXXX-XXXX XXX Label Fields: CPN: Luminus ordering part number MPN: For Luminus internal use QTY: Quantity of parts per reel Flux: Bin as defined on page 3 Voltage: Bin as defined on page 3 Color: Bin as defined on page 4 & 5 CRI: NA Lot ID & Reel ID: For Luminus internal use

14PDS-003349 Rev 02 www.luminus.com Humidity Card (bag) Desiccant (bag) Vacuum sealed antistatic bag Label: contains the type, Lot #, Quality, Product parameters Humidity card (bag) Desiccant (bag) Vacuum sealed anti-static bag Label contains the type, lot number, quantity and product parameters *Capacity 5 reels per box *Capacity 10 reels per box Label: contains the type, Lot #, Quality, Product parameters Box Size 1 - 5 reels per box Size: 22.5 x 24.5 x 6.5 cm Label contains the type, lot number, quantity and product parameters Label contains the type, lot number, quantity and product parameters Box Size 2 - 10 reels per box Size: 22.5 x 24.5 x 13 cm Packaged Reel Packaging boxes Packing Configuration:

• 1,000 units per reel
• Each reel is enclosed in anti-static bag
• Shipping label is placed on top of each reel
• Multiple labels are attached to the box (one label per reel inside the box)

15PDS-003349 Rev 02 www.luminus.com Static Electricity 1. The products are sensitive to static electricity, and care should be taken when handling them. 2. Static electricity or surge voltage will damage the LEDs. It is recommended to wear anti-electrostatic gloves or wristband when handling the LEDs. 3. All devices, equipment and machinery must be properly grounded. It is recommended that measures be taken against surge voltage to the equipment that mounts the LEDs. Reference: APN-002815 Electrical Stress Damage to LEDs and How to Prevent It Storage 1. Before opening the package The LEDs should be kept at a temperature lower than 40°C and relative humidity lower than 90%. The LEDs should be used within a year. When storing the LEDs, moisture proof package with absorbent material (silica gel) is recommended. 2. After opening the package The LEDs should be kept at a temperature lower than 30°C and relative humidity lower than 60%. The LEDs should be soldered within 168 hours (7 days) after opening the moisture proof package. If unused LEDs remain, they should be stored in moisture proof packages, such as sealed containers with moisture absorbent material (silica gel). It is also recommended to return the unused LEDs to the original moisture proof package and to seal it again. If the moisture absorbent material (silica gel) vaporizes or passes the expiration date, baking treatment should be performed by using the following conditions : 60°C for 20 hours. The LED’s electrode and lead frame comprise a silver plated copper alloy. The silver surface may be affected by environments. Please avoid conditions which may cause the LEDs to corrode or discolor. The corrosion or discoloration might lower solderability or affect optical characteristics. Please avoid rapid transition in ambient temperature, especially in high humidity environments where condensation can occur.