SST-12-W50S-A120-H4501 LUMINUS | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 14
Technical content
Features
(Part #) Product Datasheet PDS-003181 Rev 02 © 2023 Luminus Devices, Inc. - All Rights Reserved 1145 Sonora Ct., Sunnyvale, CA 94086 USA CCT Minimum Flux Bin1 Minimum Flux (lm) Chromaticity Bin Kit Code2 Ordering Part Numbers 5000K H4 285
501 SST-12-W50S-A120-H4501
502 SST-12-W50S-A120-H4502
501 SST-12-W50S-A120-H5501
502 SST-12-W50S-A120-H5502
571 SST-12-W57S-A120-H4571
572 SST-12-W57S-A120-H4572
571 SST-12-W57S-A120-H5571
572 SST-12-W57S-A120-H5572
651 SST-12-W65S-A120-H4651
652 SST-12-W65S-A120-H4652
651 SST-12-W65S-A120-H5651
652 SST-12-W65S-A120-H5652
- The Ordering Part Number specifies the Minimum Flux Bin in shipment; higher flux bins may be shipped without advance notice. Please refer to ‘Luminous Flux Binning’ table for details of all flux bins. 2. Shipments always adhere to the color bins specified in each Chromaticity Bin Kit. See ‘Chromaticity Bin Kit Codes’ table for the color bins included in each Bin Kit. SST-12-WxS High Power SST Product Datasheet
PDS-003181 Rev 02 © 2023 Luminus Devices, Inc. - All Rights Reserved 1145 Sonora Ct., Sunnyvale, CA 94086 USA Luminous Flux Binning Flux Bin Code Binning @ 700 mA, Tj=85°C1 @ 350 mA, Tj=25°C2 Correlated Minimum Flux (lm) @ Tj=85°C2 Minimum Flux (lm) Maximum Flux (lm) Minimum Flux (lm) 350 mA 1000 mA 1800mA 2400 mA H3 267 285 164 147 355 547 657 H4 285 305 176 157 379 584 701 H5 305 324 188 168 406 625 750 J2 324 345 200 178 431 664 797 J3 345 367 213 190 459 707 849 Forward Voltage Binning Notes 1. LEDs are measured at 25°C ambient temperature with 700 mA 20ms single pulse. The measured values are correlated to 700 mA at 85°C junction temperature (Tj). Luminus maintains a ±6% tolerance on flux measurement. 2. Flux values at other junction temperature (Tj) and/or forward current conditions are calculated and for reference only. Note: Individual voltage bins are not orderable. Voltage Bin Code Binning @ 700 mA, Tj=85°C Minimum Voltage (V) Maximum Voltage (V) VH 2.5 2.7 VJ 2.7 2.9 VK 2.9 3.1 Part Number Nomenclature Product Family Light Emission Area Light Color Package Configuration Bin Kit S: Surface Mount S: Dome Lensed T: Single Emitter 12: 1.2 mm2 W: White <xx> Color Temperature 50: 5000K 65: 6500K <y> CRI Category Code S: CRI>65 <p> Solder Pad Configuration A: type A - see page 11 120: 120° <ff> Minimun Flux Bin, see ‘Luminous Flux Binning’ table for details <ccc> Chromaticity Bin Kit, see ‘Chromaticity Bin Kit Codes’ table for details SST-12-WxS High Power SST Product Datasheet
PDS-003181 Rev 02 © 2023 Luminus Devices, Inc. - All Rights Reserved Chromaticity Binning Coordinates 1145 Sonora Ct., Sunnyvale, CA 94086 USA CCT Bin Code CIEx CIEy Bin Code CIEx CIEy Bin Code CIEx CIEy Bin Code CIEx CIEy 5000K DA 0.3371 0.349 DB 0.3376 0.3616 DC 0.3463 0.3687 DD 0.3451 0.3554 DH 0.3366 0.3369 DE 0.3381 0.3762 DF 0.348 0.384 DG 0.344 0.3428 5700K CA 0.3215 0.335 CB 0.3207 0.3462 CC 0.329 0.3538 CD 0.329 0.3417 CH 0.3222 0.3243 CE 0.3196 0.3602 CF 0.329 0.369 CG 0.329 0.33 6500K BA 0.3048 0.3207 BB 0.3028 0.3304 BC 0.3115 0.3391 BD 0.313 0.329 BH 0.3068 0.3113 BE 0.3005 0.3415 BF 0.3099 0.3509 BG 0.3144 0.3186 SST-12-WxS High Power SST Product Datasheet
(Part #) Product Datasheet Chromaticity Binning Diagram PDS-003181 Rev 02 © 2023 Luminus Devices, Inc. - All Rights Reserved 1145 Sonora Ct., Sunnyvale, CA 94086 USA Chromaticity Bin Kit Codes CCT Bin Kit Chromaticity Bins 5000K
501 DA, DB, DC, DD, DE, DF, DG, DH
502 DA, DB, DC, DD
571 CA, CB, CC, CD, CE, CF, CG, CH
572 CA, CB, CC, CD
651 BA, BB, BC, BD, BE, BF, BG, BH
652 BA, BB, BC, BD
Note: Luminus maintains a tolerance of ±0.005 on chromaticity (CIEx, CIEy), and ±2 on Color Rendering Index (CRI) measurements. SST-12-WxS High Power SST Product Datasheet BH BD BE BF CB CE CH CC CD CA BA BB BC BG CF DE DB CG DD DH DA DF DC DG 5000K 5700K 6500K 0.260 0.270 0.280 0.290 0.300 0.310 0.320 0.330 0.340 0.350 0.360 0.370 0.380 0.390 0.400 0.410 0.420 CIEy CIEx 501 571 651 502 572 652
Parameter Symbol Minimum Typical Maximum Unit Viewing Angle (FWHM) 2θ1/2 120 Degree Color Rendering Index CRI 65 70 Thermal resistance (Electrical) Junction/Solder Point Rthjs-EL 4.9 °C/W Forward Voltage (@ If=700 mA, Tj=85°C) Vf 2.5 2.9 3.1 V DC Forward Current (Details refer to Maximum Permissible DC Current vs Junction Temperature) If 0.1 2.4 1.8 A Junction Temperature Tj 130 150 °C Power Dissipation Pd 8 6 W Surge Current (t< 10 ms, Duty Cycle < 10%) Is-max 3.6 2.5 A Reverse Voltage (Ir=10 mA) Vr 5 V Operating Temperature Topr -40 100 °C Storage Temperature Tstg -40 100 °C ESD withstand Voltage HBM Per ANSI/ESDA/JEDEC JS-001 VHBM 8 kV ESD withstand Voltage CDM Per ANSI/ESDA/JEDEC JS-002 VCDM 1 kV Product Characteristics PDS-003181 Rev 02 © 2023 Luminus Devices, Inc. - All Rights Reserved 1145 Sonora Ct., Sunnyvale, CA 94086 USA SST-12-WxS High Power SST Product Datasheet Maximum Permissible DC Current vs. Junction Temperature 400 800 1200 1600 2000 2400 2800 0 20 40 60 80 100 120 140 160 Max DC Current (mA) Maximum Junction Temperature(℃)
PDS-003181 Rev 02 © 2023 Luminus Devices, Inc. - All Rights Reserved Optical & Electrical Characteristics 1145 Sonora Ct., Sunnyvale, CA 94086 USA Relative Luminous Flux vs. Forward Current Relative Luminous Flux vs. Temperature(Tj) Forward Voltage vs. Forward Current Relative Forward Voltage vs. Temperature(Tj) Relative Chromaticity vs. Forward Current Relative Chromaticity vs. Temperature(Tj) Φv/Φv(0.7 A), Tj = 85°C Φv/Φv(85°C), If=0.7 A Vf=f(If), Tj=85°C ΔVf=Vf(Tj)-Vf(85°C), If=0.7 A ΔCIEx,y=CIEx,y(If)-CIEx,y (0.7 A), Tj=85°C ΔCIEx,y=CIEx,y(Tj)-CIEx,y(85°C), If=0.7 A 80% 85% 90% 95% 100% 105% 110% 115% 20 40 60 80 100 120 140 Relative Luminous Flux Tj (°C) 2.50 2.60 2.70 2.80 2.90 3.00 3.10 3.20 3.30 Forward Voltage (Vf) If (A) -0.004 -0.003 -0.002 -0.001 0.000 0.001 0.002 20 40 60 80 100 120 140 Δ CIEx, Δ CIEy Tj (°C) Δ CIEx Δ CIEy -0.09 -0.06 -0.03 0.00 0.03 0.06 0.09 0.12 20 40 60 80 100 120 140 Δ Forward Voltage (Vf) Tj (°C) SST-12-WxS High Power SST Product Datasheet
PDS-003181 Rev 02 © 2023 Luminus Devices, Inc. - All Rights Reserved Relative Spectral Power Distribution 1145 Sonora Ct., Sunnyvale, CA 94086 USA Typical Radiation Characteristics If=0.7 A, Tj=25°C 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 380 430 480 530 580 630 680 730 780 Relative Radiant Power Wavelength (nm) 5000K 5700K 6500K If=0.7 A, Tj=85°C SST-12-WxS High Power SST Product Datasheet
(Part #) Product Datasheet PDS-003181 Rev 02 © 2023 Luminus Devices, Inc. - All Rights Reserved 1145 Sonora Ct., Sunnyvale, CA 94086 USA Soldering Profile SST-12-WxS High Power SST Product Datasheet Notes 1. Product complies to Moisture Sensitivity Level 3 (MSL 3). 2. The numbers in the table are specific to SAC305. Luminus recommends using an SAC305 solder paste with a no-clean flux for RoHS compliant products. 3. During the pick and place process, axial forces on the dome (or window) should not exceed 0.5 Newtons (N). 4. Use of a multi-zone IR reflow oven with a nitrogen blanket is recommended. 5. Time-temperature profile of the reflow process showing the four functional profile zones are defined in IPC-7801. Temperature is referenced to the center of the PCB. 6. Luminus recommends to use the solder paste data sheet information as a starting point in time-temperature process development. 7. These are general guidelines. Consult the solder paste manufacturer’s datasheet for guidelines specific to the alloy and flux combination used in your application. For more information, please refer to: https://luminusdevices.zendesk.com/hc/en-us/articles/360060306692-How-do-I-Reflow-Solder-Luminus-SMD-Components- 8. For any technical questions about soldering process, please contact Luminus at techsupport@luminus.com. SMT Rework Guideline Manual Hotplate Reflow Hot Air Gun Reflow Heating Time < 60 sec Hotplate Temperature < 245°C < 150°C Temperature Time Preheat RT to 150°C 1 - 2.5°C/sec Soak 150°C to 180°C 0.4 - 1°C/sec Reflow 180 to TL + 20°C 3 - 6°C/sec Cool down Peak to below 150°C 3 - 7°C/sec Liquidus Temperature, TL (SAC305 = 220°C) Peak Temperature (235 - 245°C) Time Above Liquidus (45 - 90 sec) 65 -> 200°C, 120 - 250 sec max
PDS-003181 Rev 02 © 2023 Luminus Devices, Inc. - All Rights Reserved 1145 Sonora Ct., Sunnyvale, CA 94086 USA Storage: 1. Before opening the package The LEDs should be kept at a temperature lower than 40°C and relative humidity lower than 90%. The LEDs should be used within a year. When storing the LEDs, moisture proof package with absorbent material (silica gel) is recommended. 2. After opening the package The LEDs should be kept at a temperature lower than 30°C and relative humidity lower than 60%. The LEDs should be soldered within 168 hours (7 days) after opening the moisture proof package. If unused LEDs remain, they should be stored in moisture proof packages, such as sealed containers with moisture absorbent material (silica gel). It is also recommended to return the unused LEDs to the original moisture proof package and to seal it again. If the moisture absorbent material (silica gel) vaporizes or passes the expiration date, baking treatment should be performed by using the following conditions : 60°C for 20 hours. The LED’s electrode and lead frame comprise a silver plated copper alloy. The silver surface may be affected by environments. Please avoid conditions which may cause the LEDs to corrode or discolor. The corrosion or discoloration might lower solderability or affect optical characteristics. Please avoid rapid transition in ambient temperature, especially in high humidity environments where condensation can occur. Static Electricity: 1. The products are sensitive to static electricity, and care should be taken when handling them. 2. Static electricity or surge voltage will damage the LEDs. It is recommended to wear anti-electrostatic gloves or wristband when handling the LEDs. 3. All devices, equipment and machinery must be properly grounded. It is recommended that measures be taken against surge voltage to the equipment that mounts the LEDs. SST-12-WxS High Power SST Product Datasheet
All dimensions are in millimeter ± 0.13 mm PDS-003181 Rev 02 © 2023 Luminus Devices, Inc. - All Rights Reserved 1145 Sonora Ct., Sunnyvale, CA 94086 USA Package Configuration Recommended PCB Solder Pad and Stencil Pattern All dimensions are in millimeter ± 0.13 mm 3.45+ 0.20 0.00 3.45+ 0.20 0.00 CENTER OF DIE EMITTING AREA R1.30 0.70 2.00±0.10 1.30 0.48 0.48 3.25 2.30 0.10 0.10 ANODECATHODE REVISIONS ECO REV. DESCRIPTION DATE APPROVED A 3/12/2018 D C B AA B C D 12345678 8 7 6 5 4 3 2 1 X = 0.5mm .X = 0.127mm .XX = 0.050mm .XXX = 0.010mm NONE DRAWING, OUTLINE,003147,SST,12,WXX,A120 X.XIE
1145 SONORA COURT
SUNNYVALE, CA 94086 408-708-7000 DESCRIPTION: A SURFACES
0.8 MICRONS
UNLESS OTHERWISE SPECIFIED TOLERANCES ARE MILLIMETERS [INCHES] This document and its contents are confidential information of Luminus Devices, Inc. Copyright 2005 Luminus Device,Inc. All rights reserved. B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:1 OF 2DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: DWG-003147 ANGLES 0.5 PROPRIETARY AND CONFIDENTIAL SST-12-WxS High Power SST Product Datasheet 3.45+ 0.20 0.00 3.45+ 0.20 0.00 CENTER OF DIE EMITTING AREA R1.30 0.70 2.00±0.10 1.30 0.48 0.48 3.25 2.30 0.10 0.10 ANODECATHODE REVISIONS ECO REV. DESCRIPTION DATE APPROVED A 3/12/2018 D C B AA B C D 12345678 8 7 6 5 4 3 2 1 X = 0.5mm .X = 0.127mm .XX = 0.050mm .XXX = 0.010mm NONE DRAWING, OUTLINE,003147,SST,12,WXX,A120 X.XIE SUNNYVALE, CA 94086 408-708-7000 DESCRIPTION: A SURFACES UNLESS OTHERWISE SPECIFIED TOLERANCES ARE MILLIMETERS [INCHES] This document and its contents are confidential information of Luminus Devices, Inc. Copyright 2005 Luminus Device,Inc. All rights reserved. B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:1 OF 2DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: DWG-003147 ANGLES 0.5 PROPRIETARY AND CONFIDENTIAL 0.50 0.48 3.25 3.25 0.48 0.58 0.75 0.25 3.25 1.15 2.30 3.25 1.30 Recommended PCB Solder Pad Recommended Stencil Pattern D C B AA B C D 12345678 8 7 6 5 4 3 2 1 25:1 DRAWING, OUTLINE,003147,SST,12,WXX,A120 X.XIE DESCRIPTION: AMILLIMETERS [INCHES] This document and its contents are confidential information of Luminus Devices, Inc. Copyright 2005 Luminus Device,Inc. All rights reserved. B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: PROPRIETARY AND CONFIDENTIAL ALL MEASUREMENTS AER 0.13mm UNLESS OTHERWISE SPECIFIED TOLERANCES ARE DWG-003147
2 OF 2
0.50 0.48 3.25 3.25 0.48 0.58 0.75 0.25 3.25 1.15 2.30 3.25 1.30 Recommended PCB Solder Pad Recommended Stencil Pattern D C B AA B C D 12345678 8 7 6 5 4 3 2 1 25:1 DRAWING, OUTLINE,003147,SST,12,WXX,A120 X.XIE DESCRIPTION: AMILLIMETERS [INCHES] This document and its contents are confidential information of Luminus Devices, Inc. Copyright 2005 Luminus Device,Inc. All rights reserved. B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: PROPRIETARY AND CONFIDENTIAL ALL MEASUREMENTS AER 0.13mm UNLESS OTHERWISE SPECIFIED TOLERANCES ARE DWG-003147
PDS-003181 Rev 02 © 2023 Luminus Devices, Inc. - All Rights Reserved 1145 Sonora Ct., Sunnyvale, CA 94086 USA Tape and Reel SST-20-W Product Datasheet Preliminary PDS-002946 Rev03 Draft01 © 2017 Luminus Devices, Inc. - All Rights Reserved
1145 Sonora Court Sunnyvale, CA 94086 USA
Note 1: Dimensions are in millimeters &$7+2'(6,'( $12'(6,'( 6(&7,21$$ 6(&7,21%% 7239,(: '(7$,/' '(7$,/& 127(6 (037<32&.(76 (037<32&.(76 0867&203/<72(,$& 815((/,1*',5(&7,21 815((/,1*',5(&7,21 Tape and Reel - A120 and B120 Package Configurations1 SST-20-W Product Datasheet Preliminary PDS-002946 Rev03 Draft01 © 2017 Luminus Devices, Inc. - All Rights Reserved Note 1: Dimensions are in millimeters &$7+2'(6,'( $12'(6,'( 6(&7,21$$ 6(&7,21%% 7239,(: '(7$,/' '(7$,/& 127(6 (037<32&.(76 (037<32&.(76 0867&203/<72(,$& 815((/,1*',5(&7,21 815((/,1*',5(&7,21 Tape and Reel - A120 and B120 Package Configurations1 Notes: 1. Final tape and reel packaging must meet the requirements of JEDEC-STD-033 , LEVEL 2A . 2. Leave 304.8 mm[12.00 in] of type empty for lead in (38 empty pockets) 3. Leave 457.2 mm[18.00 in] of type empty for trailer (57 empty pockets) 4. Must comply to EIA-481-C-2003 5. Each reel contains 1,000 units SST-12-WxS High Power SST Product Datasheet
PDS-003181 Rev 02 © 2023 Luminus Devices, Inc. - All Rights Reserved 1145 Sonora Ct., Sunnyvale, CA 94086 USA Humidity Card (bag) Desiccant (bag) Vacuum sealed antistatic bag Label: contains the type, Lot #, Quality, Product parameters Humidity card (bag) Desiccant (bag) Vacuum sealed anti-static bag Label contains the type, lot number, quantity and product parameters Packaged Reel Label on Reel Label Information CPN Luminus ordering part number MPN For Luminus internal use QTY Quantity of parts per reel Flux Single flux bin code (see Luminous Flux Binning table on page 3) Voltage Single voltage bin code (see Forward Voltage Binning table on page 3) Color Single chromaticity bin code (see Chromaticity Bin Coordinates table on page 4) CRI N/A Lot ID & Reel ID For Luminus internal use SST-12-WxS High Power SST Product Datasheet SST-12-W65S-A120
PDS-003181 Rev 02 © 2023 Luminus Devices, Inc. - All Rights Reserved 1145 Sonora Ct., Sunnyvale, CA 94086 USA *Capacity 5 reels per box *Capacity 10 reels per box Label: contains the type, Lot #, Quality, Product parameters Box Size 1 - 5 reels per box Size: 22.5 x 24.5 x 6.5 cm Label contains the type, lot number, quantity and product parameters Label contains the type, lot number, quantity and product parameters Box Size 2 - 10 reels per box Size: 22.5 x 24.5 x 13 cm Packaging Boxes Shipping Label on Packaging Box Multiple labels are attached to the box (one label per reel inside the box) Label Information CPN Luminus ordering part number CID Customer ID QTY Quantity of parts per reel Flux Single flux bin code (see Luminous Flux Binning table on page 3) Voltage Single voltage bin code (see Forward Voltage Binning table on page 3) Color Single chromaticity bin code (see Chromaticity Bin Coordinates table on page 4) CRI N/A Lot ID & Reel ID For Luminus internal use SST-12-WxS High Power SST Product Datasheet SST-12-W65S-A120-XXXXX Rev.01