SST-12-W27H-A120-D3271 LUMINUS | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 15
Technical content
Features
(Part #) Product Datasheet PDS-003214 Rev 02 © 2023 Luminus Devices, Inc. - All Rights Reserved 1145 Sonora Ct., Sunnyvale, CA 94086 USA CCT Minimum Flux Bin1 Minimum Flux (lm) Chromaticity Bin Kit Code2 Ordering Part Numbers 2700K D3 93
271 SST-12-W27H-A120-D3271
272 SST-12-W27H-A120-D3272
271 SST-12-W27H-A120-D4271
272 SST-12-W27H-A120-D4272
301 SST-12-W30H-A120-D4301
302 SST-12-W30H-A120-D4302
301 SST-12-W30H-A120-D5301
302 SST-12-W30H-A120-D5302
351 SST-12-W35H-A120-D5351
352 SST-12-W35H-A120-D5352
351 SST-12-W35H-A120-E2351
352 SST-12-W35H-A120-E2352
401 SST-12-W40H-A120-E2401
402 SST-12-W40H-A120-E2402
401 SST-12-W40H-A120-E3401
402 SST-12-W40H-A120-E3402
- The Ordering Part Number specifies the Minimum Flux Bin in shipment; higher flux bins may be shipped without advance notice. Please refer to ‘Luminous Flux Binning’ table for details of all flux bins. 2. Shipments always adhere to the color bins specified in each Chromaticity Bin Kit. See ‘Chromaticity Bin Kit Codes’ table for the color bins included in each Bin Kit. SST-12-WxH High Power SST Product Datasheet
PDS-003214 Rev 02 © 2023 Luminus Devices, Inc. - All Rights Reserved 1145 Sonora Ct., Sunnyvale, CA 94086 USA Luminous Flux Binning Flux Bin Code Binning @ 350 mA, Tj=85°C1 @ 350 mA, Tj=25°C1 Correlated Minimum Flux (lm) @ Tj=85°C2 Minimum Flux (lm) Maximum Flux (lm) Minimum Flux (lm) 700 mA 1000 mA 1500 mA D3 93 100 104 167 223 301 D4 100 107 112 179 239 324 D5 107 114 120 192 256 347 E2 114 122 128 204 273 369 E3 122 130 137 219 292 395 E4 130 139 146 233 311 421 E5 139 148 156 249 333 450 Forward Voltage Binning Notes 1. LEDs are measured at 25°C ambient temperature with 350 mA 20ms single pulse. The measured values are correlated to 350 mA at 85°C junction temperature (Tj). Luminus maintains a ±6% tolerance on flux measurement. 2. Flux values at other junction temperature (Tj) and/or forward current conditions are calculated and for reference only. Note: Individual voltage bins are not orderable. Voltage Bin Code Binning @ 350 mA, Tj=85°C Minimum Voltage (V) Maximum Voltage (V) VH 2.5 2.7 VJ 2.7 2.9 Part Number Nomenclature Product Family Light Emission Area Light Color Package Configuration Bin Kit S: Surface Mount S: Dome Lensed T: Single Emitter 12: 1.2 mm2 W: White <xx> Color Temperature 27: 2700K 40: 4000K <y> CRI Category Code H: CRI>95 <p> Solder Pad Configuration A: type A - see page 12 120: 120° <ff> Minimum Flux Bin, see ‘Luminous Flux Binning’ table for details <ccc> Chromaticity Bin Kit, see ‘Chromaticity Bin Kit Codes’ table for details SST-12-WxH High Power SST Product Datasheet
PDS-003214 Rev 02 © 2023 Luminus Devices, Inc. - All Rights Reserved Chromaticity Binning Coordinates 1145 Sonora Ct., Sunnyvale, CA 94086 USA SST-12-WxH High Power SST Product Datasheet CCT Bin Code CIEx CIEy Bin Code CIEx CIEy Bin Code CIEx CIEy Bin Code CIEx CIEy 2700K JA1 0.4373 0.3893 JA2 0.4418 0.3981 JA3 0.4475 0.3994 JA4 0.4428 0.3906 JB1 0.4465 0.4071 JB2 0.4513 0.4164 JB3 0.4573 0.4178 JB4 0.4523 0.4085 JC1 0.4582 0.4099 JC2 0.4634 0.4193 JC3 0.4695 0.4207 JC4 0.4641 0.4112 JD1 0.4483 0.3919 JD2 0.4532 0.4008 JD3 0.4589 0.4021 JD4 0.4538 0.3931 3000K HA1 0.4147 0.3814 HA2 0.4183 0.3898 HA3 0.4242 0.3919 HA4 0.4203 0.3833 HB1 0.4221 0.3984 HB2 0.4259 0.4073 HB3 0.4322 0.4096 HB4 0.4281 0.4006 HC1 0.4342 0.4028 HC2 0.4385 0.4119 HC3 0.4449 0.4141 HC4 0.4403 0.4049 HD1 0.4259 0.3853 HD2 0.43 0.3939 HD3 0.4359 0.3960 HD4 0.4316 0.3873
PDS-003214 Rev 02 © 2023 Luminus Devices, Inc. - All Rights Reserved Chromaticity Binning Coordinates 1145 Sonora Ct., Sunnyvale, CA 94086 USA SST-12-WxH High Power SST Product Datasheet CCT Bin Code CIEx CIEy Bin Code CIEx CIEy Bin Code CIEx CIEy Bin Code CIEx CIEy 3500K GA1 0.3889 0.369 GA2 0.3915 0.3768 GA3 0.3981 0.38 GA4 0.3953 0.372 GB1 0.3941 0.3848 GB2 0.3968 0.393 GB3 0.4040 0.3966 GB4 0.401 0.3882 GC1 0.408 0.3916 GC2 0.4113 0.4001 GC3 0.4186 0.4037 GC4 0.415 0.395 GD1 0.4017 0.3751 GD2 0.4048 0.3832 GD3 0.4116 0.3865 GD4 0.4082 0.3782 4000K FA1 0.367 0.3578 FA2 0.3686 0.3649 FA3 0.3744 0.3685 FA4 0.3726 0.3612 FB1 0.3702 0.3722 FB2 0.3719 0.3797 FB3 0.3782 0.3837 FB4 0.3763 0.376 FC1 0.3825 0.3798 FC2 0.3847 0.3877 FC3 0.3912 0.3917 FC4 0.3887 0.3836 FD1 0.3783 0.3646 FD2 0.3804 0.3721 FD3 0.3863 0.3758 FD4 0.384 0.3681
(Part #) Product Datasheet Chromaticity Binning Diagram PDS-003214 Rev 02 © 2023 Luminus Devices, Inc. - All Rights Reserved 1145 Sonora Ct., Sunnyvale, CA 94086 USA Chromaticity Bin Kit Codes CCT Bin Kit Chromaticity Bins 2700K
271 JA1, JA2, JA3, JA4, JB1, JB2, JB3, JB4,
JC1, JC2, JC3, JC4, JD1, JD2, JD3, JD4
272 JA3, JB4, JC1, JD2
301 HA1, HA2, HA3, HA4, HB1, HB2, HB3, HB4,
HC1, HC2, HC3, HC4, HD1, HD2, HD3, HD4
302 HA3, HB4, HC1, HD2
351 GA1, GA2, GA3, GA4, GB1, GB2, GB3, GB4,
GC1, GC2, GC3, GC4, GD1, GD2, GD3, GD4
352 GA3, GB4, GC1, GD2
401 FA1, FA2, FA3, FA4, FB1, FB2, FB3, FB4,
FC1,FC2, FC3, FC4, FD1, FD2, FD3, FD4
402 FA3, FB4, FC1, FD2
Note: Luminus maintains a tolerance of ±0.005 on chromaticity (CIEx, CIEy), and ±2 on Color Rendering Index (CRI) measurements. SST-12-WxH High Power SST Product Datasheet JB1 JB2 JB3 JB4 JC1 JC2 JC3 JC4 JD4 2700K 3000K JD3 JA3 JD1 JD2 JA2 JA4 GD3 HA2 HA3 HA4 HA1 HB1 HB2 HB3 HB4 JA1 HC2 HC3 HC4HC1 HD2 HD3 HD4 HD1 4000K 3500K GD2 GB2 GB3 GD1 GD4 GC1 GC2 GC3 GC4 GA4 GB1 GB4 GA3 FA2 FA3 FA4 FA1 FB1 FB2 FB3 FB4 FC2 GA2 FC4 FC3 GA1 FD4 FD1 FC1 FD3 FD2 0.350 0.360 0.370 0.380 0.390 0.400 0.410 0.420 0.430 0.440 0.450 CIEy CIEx 271 301 272 302 352 402 351 401
Parameter Symbol Minimum Typical Maximum Unit Viewing Angle (FWHM) 2θ1/2 120 Degree Color Rendering Index1 (Tj=85°C) CRI 95 Color Rendering, R9 (Tj=85°C) R9 50 Thermal resistance (Electrical) Junction/Solder Point Rthjs-EL 4.9 °C/W Junction Temperature Tj 150 °C Forward Voltage (@ If=350 mA, Tj=85°C) Vf 2.5 2.7 2.9 V DC Forward Current If 0.1 1.5 A Surge Current (t< 10 ms, Duty Cycle < 10%) Is-max 2.5 A Reverse Voltage (Ir=10 mA) Vr 5 V Power Dissipation Pd 4.9 W Operating Temperature Topr -40 100 °C Storage Temperature Tstg -40 100 °C ESD withstand Voltage HBM Per ANSI/ESDA/JEDEC JS-001 VHBM 8 kV ESD withstand Voltage CDM Per ANSI/ESDA/JEDEC JS-002 VCDM 1 kV Product Characteristics PDS-003214 Rev 02 © 2023 Luminus Devices, Inc. - All Rights Reserved 1145 Sonora Ct., Sunnyvale, CA 94086 USA SST-12-WxH High Power SST Product Datasheet Notes 1. Luminus maintains a tolerance of ±2 on Color Rendering Index (CRI) measurement.
PDS-003214 Rev 02 © 2023 Luminus Devices, Inc. - All Rights Reserved Optical & Electrical Characteristics 1145 Sonora Ct., Sunnyvale, CA 94086 USA Relative Luminous Flux vs. Forward Current Relative Luminous Flux vs. Temperature(Tj) Forward Voltage vs. Forward Current Relative Forward Voltage vs. Temperature(Tj) Relative Chromaticity vs. Forward Current Relative Chromaticity vs. Temperature(Tj) Φv/Φv(0.35 A), Tj = 85°C Φv/Φv(85°C), If=0.35 A Vf=f(If), Tj=85°C ΔVf=Vf(Tj)-Vf(85°C), If=0.35 A ΔCIEx,y=CIEx,y(If)-CIEx,y (0.35 A), Tj=85°C ΔCIEx,y=CIEx,y(Tj)-CIEx,y(85°C), If=0.35 A 50% 100% 150% 200% 250% 300% 350% Relative Luminous Flux If (A) 80% 85% 90% 95% 100% 105% 110% 115% 20 40 60 80 100 120 140 Relative Luminous Flux Tj (°C) 2.50 2.60 2.70 2.80 2.90 3.00 3.10 Forward Voltage (Vf) If (A) -0.008 -0.006 -0.004 -0.002 0.000 0.002 0.004 0.006 0.008 0.010 20 40 60 80 100 120 140 Δ CIEx, Δ CIEy Tj (°C) Δ CIEx Δ CIEy -0.08 -0.06 -0.04 -0.02 0.00 0.02 0.04 0.06 0.08 20 40 60 80 100 120 140 Δ Forward Voltage (Vf) Tj (°C) SST-12-WxH High Power SST Product Datasheet
PDS-003214 Rev 02 © 2023 Luminus Devices, Inc. - All Rights Reserved Relative Spectral Power Distribution 1145 Sonora Ct., Sunnyvale, CA 94086 USA Typical Radiation Characteristics If=0.35 A, Tj=25°C 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 380 430 480 530 580 630 680 730 780 Relative Radiant Power Wavelength (nm) 2700K 3000K 3500K 4000K If=0.35 A, Tj=85°C SST-12-WxH High Power SST Product Datasheet
(Part #) Product Datasheet PDS-003214 Rev 02 © 2023 Luminus Devices, Inc. - All Rights Reserved 1145 Sonora Ct., Sunnyvale, CA 94086 USA Soldering Profile SST-12-WxH High Power SST Product Datasheet Notes 1. Product complies to Moisture Sensitivity Level 3 (MSL 3). 2. The numbers in the table are specific to SAC305. Luminus recommends using an SAC305 solder paste with a no-clean flux for RoHS compliant products. 3. During the pick and place process, axial forces on the dome (or window) should not exceed 0.5 Newtons (N). 4. Use of a multi-zone IR reflow oven with a nitrogen blanket is recommended. 5. Time-temperature profile of the reflow process showing the four functional profile zones are defined in IPC-7801. Temperature is referenced to the center of the PCB. 6. Luminus recommends to use the solder paste data sheet information as a starting point in time-temperature process development. 7. These are general guidelines. Consult the solder paste manufacturer’s datasheet for guidelines specific to the alloy and flux combination used in your application. For more information, please refer to: https://luminusdevices.zendesk.com/hc/en-us/articles/360060306692-How-do-I-Reflow-Solder-Luminus-SMD-Components- 8. For any technical questions about soldering process, please contact Luminus at techsupport@luminus.com. SMT Rework Guideline Manual Hotplate Reflow Hot Air Gun Reflow Heating Time < 60 sec Hotplate Temperature < 245°C < 150°C Temperature Time Preheat RT to 150°C 1 - 2.5°C/sec Soak 150°C to 180°C 0.4 - 1°C/sec Reflow 180 to TL + 20°C 3 - 6°C/sec Cool down Peak to below 150°C 3 - 7°C/sec Liquidus Temperature, TL (SAC305 = 220°C) Peak Temperature (235 - 245°C) Time Above Liquidus (45 - 90 sec) 65 -> 200°C, 120 - 250 sec max
PDS-003214 Rev 02 © 2023 Luminus Devices, Inc. - All Rights Reserved 1145 Sonora Ct., Sunnyvale, CA 94086 USA Storage: 1. Before opening the package The LEDs should be kept at a temperature lower than 40°C and relative humidity lower than 90%. The LEDs should be used within a year. When storing the LEDs, moisture proof package with absorbent material (silica gel) is recommended. 2. After opening the package The LEDs should be kept at a temperature lower than 30°C and relative humidity lower than 60%. The LEDs should be soldered within 168 hours (7 days) after opening the moisture proof package. If unused LEDs remain, they should be stored in moisture proof packages, such as sealed containers with moisture absorbent material (silica gel). It is also recommended to return the unused LEDs to the original moisture proof package and to seal it again. If the moisture absorbent material (silica gel) vaporizes or passes the expiration date, baking treatment should be performed by using the following conditions : 60°C for 20 hours. The LED’s electrode and lead frame comprise a silver plated copper alloy. The silver surface may be affected by environments. Please avoid conditions which may cause the LEDs to corrode or discolor. The corrosion or discoloration might lower solderability or affect optical characteristics. Please avoid rapid transition in ambient temperature, especially in high humidity environments where condensation can occur. Static Electricity: 1. The products are sensitive to static electricity, and care should be taken when handling them. 2. Static electricity or surge voltage will damage the LEDs. It is recommended to wear anti-electrostatic gloves or wristband when handling the LEDs. 3. All devices, equipment and machinery must be properly grounded. It is recommended that measures be taken against surge voltage to the equipment that mounts the LEDs. SST-12-WxH High Power SST Product Datasheet
All dimensions are in millimeter ± 0.13 mm PDS-003214 Rev 02 © 2023 Luminus Devices, Inc. - All Rights Reserved 1145 Sonora Ct., Sunnyvale, CA 94086 USA Package Configuration Recommended PCB Solder Pad and Stencil Pattern All dimensions are in millimeter ± 0.13 mm 3.45+ 0.20 0.00 3.45+ 0.20 0.00 CENTER OF DIE EMITTING AREA R1.30 0.70 2.00±0.10 1.30 0.48 0.48 3.25 2.30 0.10 0.10 ANODECATHODE REVISIONS ECO REV. DESCRIPTION DATE APPROVED A 3/12/2018 D C B AA B C D 12345678 8 7 6 5 4 3 2 1 X = 0.5mm .X = 0.127mm .XX = 0.050mm .XXX = 0.010mm NONE DRAWING, OUTLINE,003147,SST,12,WXX,A120 X.XIE
1145 SONORA COURT
SUNNYVALE, CA 94086 408-708-7000 DESCRIPTION: A SURFACES
0.8 MICRONS
UNLESS OTHERWISE SPECIFIED TOLERANCES ARE MILLIMETERS [INCHES] This document and its contents are confidential information of Luminus Devices, Inc. Copyright 2005 Luminus Device,Inc. All rights reserved. B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:1 OF 2DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: DWG-003147 ANGLES 0.5 PROPRIETARY AND CONFIDENTIAL SST-12-WxH High Power SST Product Datasheet 3.45+ 0.20 0.00 3.45+ 0.20 0.00 CENTER OF DIE EMITTING AREA R1.30 0.70 2.00±0.10 1.30 0.48 0.48 3.25 2.30 0.10 0.10 ANODECATHODE REVISIONS ECO REV. DESCRIPTION DATE APPROVED A 3/12/2018 D C B AA B C D 12345678 8 7 6 5 4 3 2 1 X = 0.5mm .X = 0.127mm .XX = 0.050mm .XXX = 0.010mm NONE DRAWING, OUTLINE,003147,SST,12,WXX,A120 X.XIE SUNNYVALE, CA 94086 408-708-7000 DESCRIPTION: A SURFACES UNLESS OTHERWISE SPECIFIED TOLERANCES ARE MILLIMETERS [INCHES] This document and its contents are confidential information of Luminus Devices, Inc. Copyright 2005 Luminus Device,Inc. All rights reserved. B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:1 OF 2DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: DWG-003147 ANGLES 0.5 PROPRIETARY AND CONFIDENTIAL 0.50 0.48 3.25 3.25 0.48 0.58 0.75 0.25 3.25 1.15 2.30 3.25 1.30 Recommended PCB Solder Pad Recommended Stencil Pattern D C B AA B C D 12345678 8 7 6 5 4 3 2 1 25:1 DRAWING, OUTLINE,003147,SST,12,WXX,A120 X.XIE DESCRIPTION: AMILLIMETERS [INCHES] This document and its contents are confidential information of Luminus Devices, Inc. Copyright 2005 Luminus Device,Inc. All rights reserved. B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: PROPRIETARY AND CONFIDENTIAL ALL MEASUREMENTS AER 0.13mm UNLESS OTHERWISE SPECIFIED TOLERANCES ARE DWG-003147
2 OF 2
0.50 0.48 3.25 3.25 0.48 0.58 0.75 0.25 3.25 1.15 2.30 3.25 1.30 Recommended PCB Solder Pad Recommended Stencil Pattern D C B AA B C D 12345678 8 7 6 5 4 3 2 1 25:1 DRAWING, OUTLINE,003147,SST,12,WXX,A120 X.XIE DESCRIPTION: AMILLIMETERS [INCHES] This document and its contents are confidential information of Luminus Devices, Inc. Copyright 2005 Luminus Device,Inc. All rights reserved. B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: PROPRIETARY AND CONFIDENTIAL ALL MEASUREMENTS AER 0.13mm UNLESS OTHERWISE SPECIFIED TOLERANCES ARE DWG-003147
PDS-003214 Rev 02 © 2023 Luminus Devices, Inc. - All Rights Reserved 1145 Sonora Ct., Sunnyvale, CA 94086 USA Tape and Reel SST-20-W Product Datasheet Preliminary PDS-002946 Rev03 Draft01 © 2017 Luminus Devices, Inc. - All Rights Reserved
1145 Sonora Court Sunnyvale, CA 94086 USA
Note 1: Dimensions are in millimeters &$7+2'(6,'( $12'(6,'( 6(&7,21$$ 6(&7,21%% 7239,(: '(7$,/' '(7$,/& 127(6 (037<32&.(76 (037<32&.(76 0867&203/<72(,$& 815((/,1*',5(&7,21 815((/,1*',5(&7,21 Tape and Reel - A120 and B120 Package Configurations1 SST-20-W Product Datasheet Preliminary PDS-002946 Rev03 Draft01 © 2017 Luminus Devices, Inc. - All Rights Reserved Note 1: Dimensions are in millimeters &$7+2'(6,'( $12'(6,'( 6(&7,21$$ 6(&7,21%% 7239,(: '(7$,/' '(7$,/& 127(6 (037<32&.(76 (037<32&.(76 0867&203/<72(,$& 815((/,1*',5(&7,21 815((/,1*',5(&7,21 Tape and Reel - A120 and B120 Package Configurations1 Notes: 1. Final tape and reel packaging must meet the requirements of JEDEC-STD-033 , LEVEL 2A . 2. Leave 304.8 mm[12.00 in] of type empty for lead in (38 empty pockets) 3. Leave 457.2 mm[18.00 in] of type empty for trailer (57 empty pockets) 4. Must comply to EIA-481-C-2003 5. Each reel contains 1,000 units SST-12-WxH High Power SST Product Datasheet
PDS-003214 Rev 02 © 2023 Luminus Devices, Inc. - All Rights Reserved 1145 Sonora Ct., Sunnyvale, CA 94086 USA Humidity Card (bag) Desiccant (bag) Vacuum sealed antistatic bag Label: contains the type, Lot #, Quality, Product parameters Humidity card (bag) Dessicant (bag) Vacuum sealed anti-static bag Label contains the type, lot number, quantity and product parameters Packaged Reel Label on Reel Label Information CPN Luminus ordering part number MPN For Luminus internal use QTY Quantity of parts per reel Flux Single flux bin code (see Luminous Flux Binning table on page 3) Voltage Single voltage bin code (see Forward Voltage Binning table on page 3) Color Single chromaticity bin code (see Chromaticity Bin Coordinates table on page 4 & 5) CRI N/A Lot ID & Reel ID For Luminus internal use SST-12-WxH High Power SST Product Datasheet SST-12-W30H-A120
PDS-003214 Rev 02 © 2023 Luminus Devices, Inc. - All Rights Reserved 1145 Sonora Ct., Sunnyvale, CA 94086 USA *Capacity 5 reels per box *Capacity 10 reels per box Label: contains the type, Lot #, Quality, Product parameters Box Size 1 - 5 reels per box Size: 22.5 x 24.5 x 6.5 cm Label contains the type, lot number, quantity and product parameters Label contains the type, lot number, quantity and product parameters Box Size 2 - 10 reels per box Size: 22.5 x 24.5 x 13 cm Packaging Boxes Shipping Label on Packaging Box Multiple labels are attached to the box (one label per reel inside the box) Label Information CPN Luminus ordering part number CID Customer ID QTY Quantity of parts per reel Flux Single flux bin code (see Luminous Flux Binning table on page 3) Voltage Single voltage bin code (see Forward Voltage Binning table on page 3) Color Single chromaticity bin code (see Chromaticity Bin Coordinates table on page 4 & 5) CRI N/A Lot ID & Reel ID For Luminus internal use SST-12-WxH High Power SST Product Datasheet SST-12-W30H-A120-XXXXX Rev.01