SST-10-UV-A130-H395-00

SST-10-UV_V01 LUMINUS | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 15

Technical content

Features

• High Power UV LED with peak wavelengths 365 nm, 385 nm, 395 nm, 405 nm and 415 nm
• Industry standard 3.5 mm x 3.5 mm package
• 130° viewing angle
• Low Thermal Resistance : 1.4 °C/W
• Built-in ESD Protection
• Environmentally friendly: REACH, RoHS and Halogen compliant Table of Contents Angular Distribution and Typical

Product Family Chip Area Color Package Configuration1 Bin Kit2,3 SST: Surface Mount package 10: 1 mm2 UV: Ultraviolet A130: "A" solder pad layout and 130° lens B130: "B" solder pad layout and 130° lens Refer to ordering part numbers in this document SST 10 UV X130 <FWWW-00> Note: 1. Refer to drawings on page 10 & 11 for details on "A" and "B" solder pad layouts. 2. A Bin Kit represents a group of flux and wavelength bins that are shippable for a given ordering part number. Individual bins are not orderable. 3. Flux Bin listed is minimum bin shipped - higher bins may be included at Luminus’ discretion. Color Wavelength Range (nm) Luminous Flux Wavelength Bins Solder Pad Ordering Part Number Min. Flux Bin Min. Flux UV 365-375 F 810 mW 365, 370 A SST-10-UV-A130-F365-00 B SST-10-UV-B130-F365-00 G 900 mW A SST-10-UV-A130-G365-00 B SST-10-UV-B130-G365-00 380-390 G 900 mW 380, 385 A SST-10-UV-A130-G385-00 B SST-10-UV-B130-G385-00 H 990 mW A SST-10-UV-A130-H385-00 B SST-10-UV-B130-H385-00 390-400 G 900 mW 390, 395 A SST-10-UV-A130-G395-00 B SST-10-UV-B130-G395-00 H 990 mW A SST-10-UV-A130-H395-00 B SST-10-UV-B130-H395-00 400-410 G 900 mW 400, 405 A SST-10-UV-A130-G405-00 B SST-10-UV-B130-G405-00 410-420 G 900 mW 410, 415 A SST-10-UV-A130-G415-00 B SST-10-UV-B130-G415-00 Ordering Part Numbers1

Ordering Information

2PDS-002674 Rev 05 www.luminus.com

SST-10-UV LEDs are specified for flux peak wavelength and voltage at a drive current of 500 mA with a 20 ms pulse at 25°C and placed into one of the following Flux, Peak Wavelength and Forward Voltage Bins. Color Power Flux Bin (F) Minimum Flux (mW) Maximum Flux (mW) UV F 810 900 G 900 990 H 990 1080 I 1080 1170 J 1170 1260 K 1260 1350 Flux Bins Color Voltage Bin Minimum Voltage (V) Maximum Voltage (V) UV V0 2.8 3.0 V1 3.0 3.2 V2 3.2 3.4 V3 3.4 3.6 V4 3.6 3.8 V5 3.8 4.0 Note: 1. Luminus maintains a +/- 6% tolerance on flux measurements. Forward Voltage Bins SST -10-UV Product Datasheet 3PDS-002674 Rev 05 www.luminus.com Color Wavelength Bin (WWW) Minimum Wavelength (nm) Maximum Wavelength (nm) UV 365 365 370 370 370 375 380 380 385 385 385 390 390 390 395 395 395 400 400 400 405 405 405 410 410 410 415 415 415 420 Peak Wavelength Bins

Absolute Maximum Forward Current (CW) If 365 1 A If 385-415 1.5 Storage Temperature Ts min -40 Ts max 100 Junction Temperature Tj max 100 °C ESD sensitivity ANSI/ESDA/JEDEC JS-001 (HBM, Class 2) VESD 6000 V SST -10-UV Product Datasheet Note: 1. For reference only. 2. SST-10-UV LEDs are designed for operation to an absolute maximum current as specified above. Product lifetime data is specified at or below maximum drive current. Sustained operation beyond absolute maximum currents will result in a reduction of device life time . Actual device lifetimes will also depend on junction temperature and operation beyond maximum junction temperature is not recommended. Contact Luminus for lifetime derating curves and for further information. In pulsed operation, rise time from 10-90% of forward current should be longer than 0.5 μseconds. 4PDS-002674 Rev 05 www.luminus.com

Optical and Electrical Characteristics Symbol Value Unit Emitting Area AE 1.0 mm2 Test Drive Current If 500 mA Viewing Angle 2Φ1/2 130 degree Peak Wavelength Range λ 365-375 380-390 390-400 400-410 410-415 nm Peak Wavelength (Typ) λp 370 385 395 405 415 nm Forward Voltage Peak Radiometric Flux2 ΦE 875 1015 1015 930 930 mW FWHM- Spectral bandwidth at 50% of ΦV ∆λ1/2 10 10 10 10 10 nm SST -10-UV Product Datasheet Note: 1. While SST-10-UV devices are tested at 500 mA, they can be driven at CW currents ranging from 200 mA to 1.5 A and at duty cycles ranging from 1% to 100%. Drive current and duty cycle should be adjusted as necessary to maintain the junction temperature desired to meet application lifetime requirements.. 2. Typical radiometric flux is for reference only. Minimum flux values are guaranteed based on the bin kit ordered. For product roadmap and future performance of devices, contact Luminus. 5PDS-002674 Rev 05 www.luminus.com

Relative Radiometric Flux - 365 nm/385 nm/395 nm/405 nm Forward current: φv/φv(500 mA), Tc = 25°C 50% 100% 150% 200% 250% 300% Relative Radiometric Flux If (A) 365nm 385/395/405nm Temperature: φv/φv(25°C), If = 500 mA 70% 75% 80% 85% 90% 95% 100% 105% 110% 0 10 20 30 40 50 60 70 80 90 100 Relative Radiometric Flux Tc (°C) 365nm 385/395nm 405nm Forward Voltage - 365 nm/385 nm/395 nm/405 nm Forward current: Vf = V(If), Tc = 25°C 3.2 3.4 3.6 3.8 4.2 Forward Voltage (Vf) If (A) 365nm 385nm 395/405nm Temperature: ∆Vf = V(Tc) - V(25°C), If = 500 mA -0.4 -0.2 0.2 0.4 0 10 20 30 40 50 60 70 80 90 100 Forward Voltage (Vf) Tc (°C) 365nm 385/395/405nm Peak Wavelength Shift - 365 nm/385 nm/395 nm/405 nm Forward current: ∆λp= λp(If) - λp(500 mA), Tc = 25°C -3.0 -1.5 0.0 1.5 3.0 4.5 Δ Peak Wavelength (λp) If (A) 405nm 365/385/395nm Temperature: ∆λp= λp(Tc) - λp(25°C), If = 500 mA -2.0 -1.0 0.0 1.0 2.0 3.0 4.0 5.0 0 10 20 30 40 50 60 70 80 90 100 Δ Peak Wavelength (λp) Tc (°C) 365/385/395nm 405nm 6PDS-002674 Rev 05 www.luminus.com

Relative Radiometric Flux - 415 nm Forward current: φv/φv(500 mA), Tc = 25°C 50% 100% 150% 200% 250% 300% Relative Radiometric Power If (A) Temperature: φv/φv(25°C), If = 500 mA Forward Voltage - 415 nm Forward current: Vf = V(If), Tc = 25°C -0.30 -0.20 -0.10 0.00 0.10 0.20 0.30 0.40 Δ Forward Voltage (Vf) If (A) Temperature: ∆Vf = V(Tc) - V(25°C), If = 500 mA Peak Wavelength Shift - 415 nm Forward current: ∆λp= λp(If) - λp(500 mA), Tc = 25°C -0.6 -0.4 -0.2 0.0 0.2 0.4 0.6 Δ Peak Wavelength (λp) If (A) Temperature: ∆λp= λp(Tc) - λp(25°C), If = 500 mA 7PDS-002674 Rev 05 www.luminus.com

Angular Intensity Distribution Angular Distribution and Typical Spectrum Typical Spectrum 0.0 0.2 0.4 0.6 0.8 1.0 300 320 340 360 380 400 420 440 460 480 500 Relative Intensity Wavelength (nm) 365 nm 385 nm 395 nm 405 nm 415 nm Iref = f(Φ); Tc = 25°C Φref = f(λ); If = 500 mA; Tc = 25°C 8PDS-002674 Rev 05 www.luminus.com

9PDS-002674 Rev 05 www.luminus.com Soldering Profile SMT Rework Guideline Manual Hotplate Reflow Hot Air Gun Reflow Heating Time < 60 sec Hotplate Temperature < 245°C < 150°C Note: 1. Product complies to Moisture Sensitivity Level 1 (MSL 1). 2. The numbers in the table are specific to SAC305. Luminus recommends using an SAC305 solder paste with a no-clean flux for RoHS compliant products. 3. During the pick and place process, axial forces on the dome (or window) should not exceed 0.5 Newtons (N). 4. Use of a multi-zone IR reflow oven with a nitrogen blanket is recommended. 5. Time-temperature profile of the reflow process showing the four functional profile zones are defined in IPC-7801. Temperature is referenced to the center of the PCB. 6. Luminus recommends to use the solder paste data sheet information as a starting point in time-temperature process development. 7. These are general guidelines. Consult the solder paste manufacturer’s datasheet for guidelines specific to the alloy and flux combination used in your application. For more information, please refer to: https://luminusdevices.zendesk.com/hc/en-us/articles/360060306692-How-do-I-Reflow-Solder-Luminus-SMD-Components- 8. For any technical questions about soldering process, please contact Luminus at techsupport@luminus.com. Temperature Time Preheat RT to 150°C 1 - 2.5°C/sec Soak 150°C to 180°C 0.4 - 1°C/sec Reflow 180 to TL + 20°C 3 - 6°C/sec Cool down Peak to below 150°C 3 - 7°C/sec Liquidus Temperature, TL (SAC305 = 220°C) Peak Temperature (235 - 245°C) Time Above Liquidus (45 - 90 sec) 65 -> 200°C, 120 - 250 sec max

Mechanical Dimensions - A130 package SST -10-UV Product Datasheet 10PDS-002674 Rev 05 www.luminus.com 3.45 3.45 FRONT VIEWANODE OPTICAL REFERENCE R1.30 0.68 1.98±0.10 1.30 SIDE VIEW CATHODE ANODE THERMAL PAD (NEUTRAL) BACK VIEW REVISIONS ECO REV. DESCRIPTION DATE APPROVED A 05/20/2022 D C B AA B C D 12345678 8 7 6 5 4 3 2 1 X = 0.5mm .X = 0.127mm .XX = 0.050mm .XXX = 0.010mm NONE DRAWING,OUTLINE,SST-08-UV-A130 X.XIE

1145 SONORA COURT

SUNNYVALE, CA 94086 408-708-7000 DESCRIPTION: A SURFACES

0.8 MICRONS

UNLESS OTHERWISE SPECIFIED TOLERANCES ARE MILLIMETERS [INCHES] This document and its contents are confidential information of Luminus Devices, Inc. Copyright 2005 Luminus Device,Inc. All rights reserved. B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:1 OF 2DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: DWG- ANGLES 0.5 PROPRIETARY AND CONFIDENTIAL 0.50 0.48 3.25 3.25 0.48 0.58 0.75 0.25 3.25 1.15 2.30 3.25 1.30 Recommended PCB Solder Pad Recommended Stencil Pattern D C B AA B C D 12345678 8 7 6 5 4 3 2 1 25:1 DRAWING, OUTLINE,SST-08-UV-A130 X.XIE DESCRIPTION: AMILLIMETERS [INCHES] This document and its contents are confidential information of Luminus Devices, Inc. Copyright 2005 Luminus Device,Inc. All rights reserved. B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: PROPRIETARY AND CONFIDENTIAL ALL MEASUREMENTS AER 0.13mm UNLESS OTHERWISE SPECIFIED TOLERANCES ARE DWG-

2 OF 2

Mechanical Dimensions - B130 package SST -10-UV Product Datasheet 11PDS-002674 Rev 05 www.luminus.com 3.45 3.45 FRONT VIEW ANODE OPTICAL REFERENCE R1.30 1.98±0.10 1.30 SIDE VIEW 1.00 1.70 2.70 2.70 CATHODE ANODE THERMAL PAD (NEUTRAL) BACK VIEW REVISIONS ECO REV. DESCRIPTION DATE APPROVED A 05/20/2022 D C B AA B C D 12345678 8 7 6 5 4 3 2 1 X = 0.5mm .X = 0.127mm .XX = 0.050mm .XXX = 0.010mm NONE DRAWING,OUTLINE,SST-08-UV-B130 X.XIE SUNNYVALE, CA 94086 408-708-7000 DESCRIPTION: A SURFACES UNLESS OTHERWISE SPECIFIED TOLERANCES ARE MILLIMETERS [INCHES] This document and its contents are confidential information of Luminus Devices, Inc. Copyright 2005 Luminus Device,Inc. All rights reserved. B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:1 OF 2DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: DWG- ANGLES 0.5 PROPRIETARY AND CONFIDENTIAL 3.45 3.45 FRONT VIEW ANODE OPTICAL REFERENCE R1.30 1.98±0.10 1.30 SIDE VIEW 1.00 1.70 2.70 2.70 CATHODE ANODE THERMAL PAD (NEUTRAL) BACK VIEW REVISIONS ECO REV. DESCRIPTION DATE APPROVED A 05/20/2022 D C B AA B C D 12345678 8 7 6 5 4 3 2 1 X = 0.5mm .X = 0.127mm .XX = 0.050mm .XXX = 0.010mm NONE DRAWING,OUTLINE,SST-08-UV-B130 X.XIE SUNNYVALE, CA 94086 408-708-7000 DESCRIPTION: A SURFACES UNLESS OTHERWISE SPECIFIED TOLERANCES ARE MILLIMETERS [INCHES] This document and its contents are confidential information of Luminus Devices, Inc. Copyright 2005 Luminus Device,Inc. All rights reserved. B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:1 OF 2DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: DWG- ANGLES 0.5 PROPRIETARY AND CONFIDENTIAL 2.70 2.70 0.35 0.50 2.70 0.25 0.55 0.40 0.50 0.90 2.70 1.70 Recommended PCB Solder Pad Recommended Stencil Pattern D C B AA B C D 12345678 8 7 6 5 4 3 2 1 25:1 DRAWING,OUTLINE,SST-08-UV-B130 X.XIE DESCRIPTION: AALL MEASUREMENTS AER 0.13mm UNLESS OTHERWISE SPECIFIED TOLERANCES ARE MILLIMETERS [INCHES] This document and its contents are confidential information of Luminus Devices, Inc. Copyright 2005 Luminus Device,Inc. All rights reserved. B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: PROPRIETARY AND CONFIDENTIAL DWG-

12PDS-002674 Rev 05 www.luminus.com &$7+2'(6,'( $12'(6,'( 6(&7,21$$ 6(&7,21%% 7239,(: '(7$,/' '(7$,/& 127(6 (037<32&.(76 (037<32&.(76 0867&203/<72(,$& 815((/,1*',5(&7,21 815((/,1*',5(&7,21

Label Fields:

• CPN: Luminus ordering part number
• CID: Customer’s part number
• QTY: Quantity of devices in pack
• Flux: Bin as defined on page 3
• Voltage: NA
• Color: Bin as defined on page 3
• CRI: NA Packing Configuration:
• 500 pieces per pack with 1 reel
• Partial pack or tray may be shipped
• Each pack is enclosed in anti-static bag
• Shipping label is placed on top of each pack XXX-XX-XXXX-XXXX-XXXXXXXXX XXX Reel ID 13PDS-002674 Rev 05 www.luminus.com

This product is sensitive to static electricity, and care should be taken when handling them. Static electricity or surge voltage will damage the LEDs. It is recommended to wear an anti-electrostatic wristband or anti-electrostatic gloves when handling the LEDs. All devices, equipment and machinery must be properly grounded. It is recommended that measures be taken to isolate LED processing equipment from potential sources of voltage surges. Reference: APN-002815 Electrical Stress Damage to LEDs and How to Prevent It Eye Safety SST-10-UV LEDs are short wavelength, UV LEDs. During operation, the LED emits high intensity UVA radiation, which is harmful to skin and eyes. UV light is also hazardous to skin and may cause cancer. Avoid exposure to deep UV light when LED is operational. Precautions must be taken to avoid looking directly at the UV light without the use of UV light protective glasses. Do not look directly at the front or at the LED’s lens when LED is operational. Integration of this LED package into LED sources (arrays, lamps or luminaires) or addition of reflective or magnifying optics may change the expected photobiological safety characteristics of such devices. The assigned risk group classification of the LED package may not necessarily indicate the risk group classification of the LED light source. Operating Conditions In order to ensure the correct functioning of these LEDs, compliance to maximum allowed specifications is important. UV LEDs are particularly sensitive to drive currents that exceed the max operating specifications and may be damaged by such drive currents. The use of current regulated drive circuits is strongly recommended when operating these devices. Customers should also provide adequate thermal management to ensure LEDs do not exceed maximum recommended temperatures. Operating LEDs at temperatures in excess of specification will result in damage and possibly complete failure of the device. 14PDS-002674 Rev 05 www.luminus.com

Revision History

Rev Date Description of Change 01 06/01/2018 Initial release. 02 08/31/2018 Added "B130" version: updated ordering part numbers, characterization graphs and mechanical drawings. 03 06/29/2021 Corrected drawings - add Vf bins - fix typos. 04 07/19/2022 Updated ordering bin codes. 05 03/21/2023 Added 415 nm CPNs and LIVT curves. Updated template and editorial correction. SST -10-UV Product Datasheet 15PDS-002674 Rev 05 www.luminus.com