SST-10-R-B90-H630 | DigiCamel IC Datasheet

Online Datasheet

Read SST-10-R-B90-H630 online.

SST-10-R_V01 LUMINUS | Alldatasheet

Document overview

Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
PDF pages: 16

Technical content

Applications

Horticulture / Growlights
Accent and effect lighting
Architectural lighting
Stage lighting Features:
High Power Red LED with Peak Wavelength of 630 nm
Wall-Plug Efficiency: typ. 49% @350 mA
80° or 120° viewing angle at 50% Iv
Low Thermal Resistance
Built-in ESD Protection
RoHS and REACH compliant PDS-002895 Rev 04 © 2023 Luminus Devices, Inc. - All Rights Reserved SST-10-R Red LED SST-10-Red Product Datasheet

1145 Sonora Court • Sunnyvale, CA 94086

Absolute Maximum Ratings . . . 4 Angular Distribution and

PDS-002895 Rev 04 © 2023 Luminus Devices, Inc. - All Rights Reserved Product Family LED Emission Area Color Package Configuration Bin kit SST: Surface Mount Package 10: 1.0 mm2 R: Red See Mechanical Drawing section Flux and Wavelength bin kit code - See available ordering codes

Ordering Information

The following table describes the bin kit ordering codes available for the SST-10 Red LEDs. Each bin kit specifies a minimum flux as well as specific chromaticity bins allowed. Please note that within each kit a maximum flux is not specified and as a result Luminus may ship any part meeting or exceeding the minimum flux specification. Shipments will always meet the listed chromaticity bins. For information on ordering bin kits not listed below, please contact Luminus. Color Luminous Flux Wavelength Bins Ordering Part Numbers Bin Kit Flux Code Min. Flux Red G 270 615,620,625 SST-10-R-B90-G630 SST-10-R-B130-G630 H 310 615,620,625 SST-10-R-B90-H630 SST-10-R-B130-H630 J 350 615,620,625 SST-10-R-B90-J630 SST-10-R-B130-J630 Ordering Part Numbers Part Number Nomenclature

PDS-002895 Rev 04 © 2023 Luminus Devices, Inc. - All Rights Reserved Binning Structure1,2 Color Flux Bin (FF) Minimum Flux (mW) Maximum Flux (mW) Red G 270 310 H 310 350 J 350 390 K 390 430 Flux Bins Color Wavelength Bin (WWW) Minimum Wavelength (nm) Maximum Wavelength (nm) Red 615 615 620 620 620 625 625 625 630 Dominant Wavelength Bins Note 1: Test condition at drive current 350 mA, 20 ms single pulse at 25°C. Note 2: Luminus maintains a +/- 6% tolerance on flux measurements.

(Part #) Product Datasheet PDS-002895 Rev 04 © 2023 Luminus Devices, Inc. - All Rights Reserved Note 1: Ratings are based on operation at a constant junction temperature of Tj = 25°C. Test conditions: 350 mA, 20 ms pulse at 25°C. Note 2: Maximum operating case temperature combined with maximum drive current defines the total maximum operating condition for the device. To prevent damage, please follow derating curves for all operating conditions. Parameter Symbol Rating Unit Forward Current2 I 1.5 A Power Dissipation P d 5.0 W Reverse Voltage V r 5 V Storage Temperature T sTG min -40 T sTG max 100 Junction Temperature2 T J 115 °C ESD Sensitivity (HBM) V b 6000 V

(Part #) Product Datasheet PDS-002895 Rev 04 © 2023 Luminus Devices, Inc. - All Rights Reserved Note 1: Ratings are based on operation at a constant junction temperature of Tj = 25°C. Test conditions: 350 mA, 20 ms pulse at 25°C. Note 2: To prevent damage, please refer to operating conditions and derating curves for appropriate maximum operating conditions. Parameter Symbol Value Unit Forward Current2 typ If 350 mA max If max 1,500 Output Power typ Φr 360 mW Forward Voltage min Vf min 1.8 Vtyp Vf 2.1 max Vf max 2.6 Wall-Plug Efficiency typ WPE 49 % Viewing Angle typ 2 Ø1/2 80 or 120 degrees Dominant Wavelength min λd min 615 nmtyp λd 621 max λd max 627 FWHM min Dλ1/2 min 16 nmtyp Dλ1/2 20 max Dλ1/2 max 24 Thermal Resistance (Electrical) typ Rth 4.3 °C/W Thermal coefficient of radiometric flux typ -0.8 % / °C Thermal coefficient of forward voltage typ -2.0 mV / °C Thermal coefficient of wavelength typ 0.07 nm / °C

(Part #) Product Datasheet PDS-002895 Rev 04 © 2023 Luminus Devices, Inc. - All Rights Reserved Relative Luminous Flux vs. Forward Current Relative Luminous Flux vs. Temperature Relative Forward Voltage vs. Forward Current Relative Forward Voltage vs. Temperature Dominant Wavelength Shift vs. Forward Current Dominant Wavelength Shift vs. Temperature Φv/Φv(0.35 A), Tj = 25°C Φv/Φv(25°C), If=0.35 A Vf=f(If), Tj=25°C ΔVf=Vf(Tj)-Vf(25°C), If=0.35 A Δλ= λ(If)-λ(0.35 A), Tj= 25°C Δλ = λ(Tj) - λ(25°C), If= 0.35 A 50% 55% 60% 65% 70% 75% 80% 85% 90% 95% 100% 105% 20 25 30 35 40 45 50 55 60 65 70 75 80 85 Relative Luminous Flux Tj (°C) 50% 100% 150% 200% 250% 300% 350% 400% Relative Luminous Flux If (A) -0.12 -0.10 -0.08 -0.06 -0.04 -0.02 0.00 0.02 20 25 30 35 40 45 50 55 60 65 70 75 80 85 Δ Forward Voltage (Vf) Tj (°C) -0.5 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 20 25 30 35 40 45 50 55 60 65 70 75 80 85 Δ Dominant Wavelength (λd) Tj (°C)

(Part #) Product Datasheet PDS-002895 Rev 04 © 2023 Luminus Devices, Inc. - All Rights Reserved 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 570 580 590 600 610 620 630 640 650 660 670 680 Relative Radiant Power Wavelength (nm) Typical Spectrum If = 0.35 A, Tj= 25°C Typical Angular Distribution - B130 Tj= 25°C Angular Distribution and Spectrum Typical Angular Distribution - B90 Tj= 25°C Conversion Table - Radiometric Power - Lumens If = 0.35 A, Tj= 25°C Dominant wavelength (nm) (mW) 615 nm 620 nm 625 nm 630 nm Flux bin G bin 270 66 lm 53 lm 41 lm 31 lm H bin 310 76 lm 60 lm 47 lm 35 lm J bin 350 86 lm 68 lm 53 lm 40 lm K bin 390 96 lm 76 lm 59 lm 44 lm

Product complies to Moisture Sensitivity Level 1 (MSL 1). 2. The numbers in the table are specific to SAC305. Luminus recommends using an SAC305 solder paste with a no-clean flux for RoHS compliant products. 3. During the pick and place process, axial forces on the dome (or window) should not exceed 0.5 Newtons (N). 4. Use of a multi-zone IR reflow oven with a nitrogen blanket is recommended. 5. Time-temperature profile of the reflow process showing the four functional profile zones are defined in IPC-7801. Temperature is referenced to the center of the PCB. 6. Luminus recommends to use the solder paste data sheet information as a starting point in time-temperature process development. 7. These are general guidelines. Consult the solder paste manufacturer’s datasheet for guidelines specific to the alloy and flux combination used in your application. For more information, please refer to: https://luminusdevices.zendesk.com/hc/en-us/articles/360060306692-How-do-I-Reflow-Solder-Luminus-SMD-Components- 8. For any technical questions about soldering process, please contact Luminus at techsupport@luminus.com. SMT Rework Guideline Manual Hotplate Reflow Hot Air Gun Reflow Heating Time < 60 sec Hotplate Temperature < 245°C < 150°C Temperature Time Preheat RT to 150°C 1 - 2.5°C/sec Soak 150°C to 180°C 0.4 - 1°C/sec Reflow 180 to TL + 20°C 3 - 6°C/sec Cool down Peak to below 150°C 3 - 7°C/sec Liquidus Temperature, TL (SAC305 = 220°C) Peak Temperature (235 - 245°C) Time Above Liquidus (45 - 90 sec) 65 -> 200°C, 120 - 250 sec max Soldering Profile

PDS-002895 Rev 04 © 2023 Luminus Devices, Inc. - All Rights Reserved Mechanical Dimensions - B130 Package 3.45 3.45 CENTER OF DIE EMITTING AREA ANODE R1.30 0.68 1.98 2.70 2.70 0.38 0.38 1.00 0.50 0.50 ANODE CATHODETHERMAL PAD FRONT VIEW SIDE VIEW BACK VIEW REVISIONS ECO REV. DESCRIPTION DATE APPROVED

01 RELEASE TO PRODUCTION 9/28/2018

D C B AA B C D 12345678 8 7 6 5 4 3 2 1 X = 0.5mm .X = 0.127mm .XX = 0.050mm .XXX = 0.010mm DRAWING, OUTLINE,002775,SST-10-R-B130 X.XIE

1145 SONORA COURT

SUNNYVALE, CA 94086 408-708-7000 DESCRIPTION: SURFACES

0.8 MICRONS

UNLESS OTHERWISE SPECIFIED TOLERANCES ARE MILLIMETERS [INCHES] This document and its contents are confidential information of Luminus Devices, Inc. Copyright 2005 Luminus Device,Inc. All rights reserved. B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:1 OF 2DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: DWG-002775 ANGLES 0.5 PROPRIETARY AND CONFIDENTIAL 2.70 2.70 0.35 0.50 2.70 0.25 0.55 0.40 0.50 0.90 2.70 1.70 Recommended PCB Solder Pad Recommended Stencil Pattern D C B AA B C D 12345678 8 7 6 5 4 3 2 1 25:1 DRAWING, OUTLINE,002775,SST-10-R-B130 X.XIE DESCRIPTION: 01ALL MEASUREMENTS AER 0.13mm UNLESS OTHERWISE SPECIFIED TOLERANCES ARE MILLIMETERS [INCHES] This document and its contents are confidential information of Luminus Devices, Inc. Copyright 2005 Luminus Device,Inc. All rights reserved. B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: PROPRIETARY AND CONFIDENTIAL DWG-002775

2 OF 2

3.45 3.45 CENTER OF DIE EMITTING AREA ANODE R1.30 0.68 1.98 2.70 2.70 0.38 0.38 1.00 0.50 0.50 ANODE CATHODETHERMAL PAD FRONT VIEW SIDE VIEW BACK VIEW REVISIONS ECO REV. DESCRIPTION DATE APPROVED D C B AA B C D 12345678 8 7 6 5 4 3 2 1 X = 0.5mm .X = 0.127mm .XX = 0.050mm .XXX = 0.010mm DRAWING, OUTLINE,002775,SST-10-R-B130 X.XIE SUNNYVALE, CA 94086 408-708-7000 DESCRIPTION: SURFACES UNLESS OTHERWISE SPECIFIED TOLERANCES ARE MILLIMETERS [INCHES] This document and its contents are confidential information of Luminus Devices, Inc. Copyright 2005 Luminus Device,Inc. All rights reserved. B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:1 OF 2DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: DWG-002775 ANGLES 0.5 PROPRIETARY AND CONFIDENTIAL 2.70 2.70 0.35 0.50 2.70 0.25 0.55 0.40 0.50 0.90 2.70 1.70 Recommended PCB Solder Pad Recommended Stencil Pattern D C B AA B C D 12345678 8 7 6 5 4 3 2 1 25:1 DRAWING, OUTLINE,002775,SST-10-R-B130 X.XIE DESCRIPTION: 01ALL MEASUREMENTS AER 0.13mm UNLESS OTHERWISE SPECIFIED TOLERANCES ARE MILLIMETERS [INCHES] This document and its contents are confidential information of Luminus Devices, Inc. Copyright 2005 Luminus Device,Inc. All rights reserved. B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: PROPRIETARY AND CONFIDENTIAL DWG-002775

PDS-002895 Rev 04 © 2023 Luminus Devices, Inc. - All Rights Reserved Tape and Reel - B130 Package 8.00±0.10 .315±.004 2.00±0.10 .079±.004 4.00±0.10 .157±.004 1.50+ 0.10 0.00 .059+ .004 .000 1.70±0.10 .067±.004 1.75±0.10 .069±.004 5.50±0.05 .217±.002 12.00±0.20 .472±.008 A A BB CATHODE SIDE ANODE SIDE 3.80+ 0.10 0.00 .150+ .004 .000 4.18+ 0.10 0.00 .165+ .004 .000 0.25±0.05 5.0° SECTION A-A 2.20+ 0.10 0.00 .087+ .004 .000 3.80+ 0.10 0.00 .150+ .004 .000 4.18+ 0.10 0.00 .165+ .004 .000 5.0° SECTION B-B TOP VIEW DETAIL D 178 C .5122.00 .079 21.3 .839 16.0 .630 120° DETAIL C 12.4 .488 NOTES: FINAL TAPE AND REEL PACKAGING MUST MEET THE 1. REQUIREMENTS OF JEDEC-STD-033, LEVEL 2A. LEAVE 304.8mm [12.00 in] OF TAPE EMPTY FOR LEAD IN 2. (38 EMPTY POCKETS). LEAVE 457.2mm [18.00 in] OF TAPE EMPTY FOR TRAILER 3. (57 EMPTY POCKETS). MUST COMPLY TO EIA-481-C-20034. UNREELING DIRECTION UNREELING DIRECTION

PDS-002895 Rev 04 © 2023 Luminus Devices, Inc. - All Rights Reserved Mechanical Dimensions - B90 Package 2.70 2.70 0.38 0.38 1.00 0.50 0.50 ANODE CATHODETHERMAL PAD 3.45 3.45 CENTER OF EMITTING AREA Anode R1.08 0.63 2.33 FRONT VIEW SIDE VIEW BACK VIEW REVISIONS ECO REV. DESCRIPTION DATE APPROVED

01 STEP DOCUMENT LOSS UPDATE DRAWING 06/22/2022

D C B AA B C D 12345678 8 7 6 5 4 3 2 1 X = 0.5mm .X = 0.127mm .XX = 0.050mm .XXX = 0.010mm DRAWING, OUTLINE,002730,SST-10-R-B90 X.XIE SUNNYVALE, CA 94086 408-708-7000 DESCRIPTION: SURFACES UNLESS OTHERWISE SPECIFIED TOLERANCES ARE MILLIMETERS [INCHES] This document and its contents are confidential information of Luminus Devices, Inc. Copyright 2005 Luminus Device,Inc. All rights reserved. B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:1 OF 2DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: DWG-002730 ANGLES 0.5 PROPRIETARY AND CONFIDENTIAL 2.70 2.70 0.35 0.50 2.70 0.25 0.55 0.40 0.50 0.90 2.70 1.70 Recommended PCB Solder Pad Recommended Stencil Pattern D C B AA B C D 12345678 8 7 6 5 4 3 2 1 25:1 DRAWING, OUTLINE,002730,SST-10-R-B90 X.XIE DESCRIPTION: 01ALL MEASUREMENTS AER 0.13mm UNLESS OTHERWISE SPECIFIED TOLERANCES ARE MILLIMETERS [INCHES] This document and its contents are confidential information of Luminus Devices, Inc. Copyright 2005 Luminus Device,Inc. All rights reserved. B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: PROPRIETARY AND CONFIDENTIAL DWG-002730 2.70 2.70 0.38 0.38 1.00 0.50 0.50 ANODE CATHODETHERMAL PAD 3.45 3.45 CENTER OF EMITTING AREA Anode R1.08 0.63 2.33 FRONT VIEW SIDE VIEW BACK VIEW REVISIONS ECO REV. DESCRIPTION DATE APPROVED D C B AA B C D 12345678 8 7 6 5 4 3 2 1 X = 0.5mm .X = 0.127mm .XX = 0.050mm .XXX = 0.010mm DRAWING, OUTLINE,002730,SST-10-R-B90 X.XIE SUNNYVALE, CA 94086 408-708-7000 DESCRIPTION: SURFACES UNLESS OTHERWISE SPECIFIED TOLERANCES ARE MILLIMETERS [INCHES] This document and its contents are confidential information of Luminus Devices, Inc. Copyright 2005 Luminus Device,Inc. All rights reserved. B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:1 OF 2DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: DWG-002730 ANGLES 0.5 PROPRIETARY AND CONFIDENTIAL 2.70 2.70 0.35 0.50 2.70 0.25 0.55 0.40 0.50 0.90 2.70 1.70 Recommended PCB Solder Pad Recommended Stencil Pattern D C B AA B C D 12345678 8 7 6 5 4 3 2 1 25:1 DRAWING, OUTLINE,002730,SST-10-R-B90 X.XIE DESCRIPTION: 01ALL MEASUREMENTS AER 0.13mm UNLESS OTHERWISE SPECIFIED TOLERANCES ARE MILLIMETERS [INCHES] This document and its contents are confidential information of Luminus Devices, Inc. Copyright 2005 Luminus Device,Inc. All rights reserved. B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: PROPRIETARY AND CONFIDENTIAL DWG-002730

PDS-002895 Rev 04 © 2023 Luminus Devices, Inc. - All Rights Reserved Tape and Reel - B90 Package 8.00±0.10 .315±.004 2.00±0.10 .079±.004 4.00±0.05 .157±.002 1.50+ 0.10 0.00 .059+ .004 .000 1.50±0.10 .059±.004 1.75±0.10 .069±.004 5.50±0.05 .217±.002 12.00±0.20 .472±.008 A A BB CATHODE SIDE ANODE SIDE 3.60±0.10 .142±.004 0.25±0.05 7.0° SECTION A-A 2.48±0.10 .098±.004 3.67±0.10 .144±.004 7.0° SECTION B-B TOP VIEW DETAIL D 178 C .5122.00 .079 21.3 .839 16.0 .630 120° DETAIL C 12.4 .488 3.0 3.8 560 22.0 NOTES: FINAL TAPE AND REEL PACKAGING MUST MEET THE 1. REQUIREMENTS OF JEDEC-STD-033, LEVEL 2A. LEAVE 304.8mm [12.00 in] OF TAPE EMPTY FOR LEAD IN 2. (38 EMPTY POCKETS). LEAVE 457.2mm [18.00 in] OF TAPE EMPTY FOR TRAILER 3. (57 EMPTY POCKETS). MUST COMPLY TO EIA-481-C-20034. UNREELING DIRECTION UNREELING DIRECTION

PDS-002895 Rev 04 © 2023 Luminus Devices, Inc. - All Rights Reserved Humidity Card (bag) Desiccant (bag) Vacuum sealed antistatic bag Label: contains the type, Lot #, Quality, Product parameters Humidity card (bag) Desiccant (bag) Vacuum sealed anti-static bag Label contains the type, lot number, quantity and product parameters Packaging Reel Label on Reel Label Information CPN Luminus ordering part number MPN For Luminus internal use QTY Quantity of parts per reel Flux Single flux bin code (see Flux Bins table on page 3) Color Single Dominant Wavelength bin code (see Dominant Wavelength Bins table on page 3) Voltage N/A CRI N/A Lot ID & Reel ID For Luminus internal use SST-10-R-XXXX XXXXXX

PDS-002895 Rev 04 © 2023 Luminus Devices, Inc. - All Rights Reserved Shipping Label on Packaging Box Multiple labels are attached to the box (one label per reel inside the box) Label Information CPN Luminus ordering part number CID Customer ID QTY Quantity of parts per reel Flux Single flux bin code (see Flux Bins table on page 3) Voltage N/A Color Single Dominant Wavelength bin code (see Dominant Wavelength Bins table on page 3) CRI N/A Lot ID & Reel ID For Luminus internal use *Capacity 5 reels per box *Capacity 10 reels per box Label: contains the type, Lot #, Quality, Product parameters Box Size 1 - 5 reels per box Size: 22.5 x 24.5 x 6.5 cm Label contains the type, lot number, quantity and product parameters Label contains the type, lot number, quantity and product parameters Box Size 2 - 10 reels per box Size: 22.5 x 24.5 x 13 cm SST-10-R-XXXX-XXXXX

PDS-002895 Rev 04 © 2023 Luminus Devices, Inc. - All Rights Reserved Storage: 1. Before opening the package The LEDs should be kept at a temperature lower than 40°C and relative humidity lower than 90%. The LEDs should be used within a year. When storing the LEDs, moisture proof package with absorbent material (silica gel) is recommended. 2. After opening the package The LEDs should be kept at temperature lower than 30°C and relative humidity lower than 60%. The LEDs should be soldered within 168 hours (7 days) after opening the moisture proof package. If unused LEDs remain, they should be stored in moisture proof packages, such as sealed containers with moisture proof package within absorbent material (silica gel). It is also recommended to return the unused LEDs to the original moisture proof package and to seal the moisture proof package again. If the moisture absorbent material (silica gel) vapors or expires the expiration date, baking treatment should be performed by using the following conditions : 60°C for 20 hours. The LEDs electrode and leadframe comprise a silver plated copper alloy. The silver surface may be affected by environments. Please avoid conditions which may cause the LEDs to corrode or discolored. The corrosion or discoloration might lower solderability or affect optical characteristics. Please avoid rapid transition in ambient temperature, especially in high humidity environments where condensation can occur. Static Electricity: 1. The products are sensitive to static electricity, and care should be taken when handling them. 2. Static electricity or surge voltage will damage the LEDs. It is recommended to wear a anti-electrostatic wristband or anti-electrostat- ic gloves when handling the LEDs. 3. All devices, equipment and machinery must be properly grounded. It is recommended that measures be taken against surge volt- age to the equipment that mounts the LEDs. Precautions for Use

Revision History

Rev Date Description of Change 01 06/10/2016 Initial Release - Preliminary Specifications 02 04/03/2017 Updated title in “Relative Output Flux vs. Junction Temperature” graph and address.. 03 07/31/2017 Corrected ordering information typo on page 2, dissipated power value on page 4 and other various minor typos. 04 03/10/2023 - Updated flux bins and ordering part numbers - Updated graphs on page 6 & 7 - Updated Product picture

Product Information

SST-10-R-B90-H630 specifications and overview.

Summary

Red LED 2023

Description

Red LED 2023

Source title SST-10-R-B90-H630 Datasheet(PDF) - Luminus, Inc

Related Parts

More parts from the same family.

Browse manufacturer