SST-10-IRD-810NM LUMINUS | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 15
Technical content
Features
- Surveillance Systems / CCTV
- Iris and Face Recognition
- License Plate Scanning
- Automotive Sensing
- Machine Vision
- Night Vision
Ordering Information and Binning Structure All SST-10-IRD-810nm products are packaged and labeled with part numbers as outlined in below. When shipped, each reel will contain only a single flux wavelength and Vf bin. The part number designation is as follows: Bin Code Radiometric Power at 350 mA, tp=20ms Minimum Flux (mW) Maximum Flux (mW) S 475 505 T 505 535 U 535 565 V 565 595 W 595 625 X 625 655 Y 655 685 Z 685 715
1145 Sonora Ct • Sunnyvale, CA 94086
SST-10-IRD-810nm Product Datasheet Peak Wavelength Minimum Flux Bin(mW) Lens Angle Ordering Part Number 810 475 90 SST-10-IRD-B90H-S810 475 130 SST-10-IRD-B130H-S810 Flux Bins1 Product Family Chip Area Color Package Configuration Bin Kit SST - Ceramic Surface Mount package w/ encapsulation 10 : 1.0 mm2 IRD : Dual Junction Infrared B90H : 90 deg Beam Angle B130H : 130 deg Beam Angle High Performance Ceramic 3.45mm x 3.45mm See Pages 8-9 for Detailed Drawings See below for flux, wavelength and forward voltage binning information PDS-003127 Rev 02 ©2023 Luminus Devices, Inc. - All Rights Reserved Bin Code Minimum Peak Wavelength (nm) Maximum Peak Wavelength (nm) 810 800 830 Wavelength Bins1 Bin Code Minimum Forward Voltage (V) Maximum Forward Voltage (V) V9 2.8 3.0 Va 3.0 3.2 Vb 3.2 3.4 Forward Voltage Bins1
Note 1: Binning based on operation at a current of 350 mA, 20 ms single pulse and a constant junction temperature of Tj = 25°C. Parts are binned and shipped in 0.2 V Vf increments. Note 2: To prevent damage refer to operating conditions and derating curves for appropriate maximum operating conditions Note 3: Luminus SST-10-IRD-810nm LEDs are designed for operation up to an absolute maximum forward drive current as specified above. Product lifetime data is specified at typical forward drive currents. Sustained operation at absolute maximum currents will result in a reduction of device lifetime compared to typical forward drive currents. Actual device lifetimes will also depend on junction temperature. Note 4: Maximum operating case temperature combined with maximum drive current defines the total maximum operating condition for the device. To prevent damage, please operate devices within specified conditions. Parameter Symbol Rating Unit Forward Current3,4 I 1.5 (CW) / 5 (Pulse) A Power Dissipation PD 6 W Reverse Voltage VR 5 V Storage Temperature TSTG -40 to 100 °C Junction Temperature3,4 TJ 115°C °C ESD Sensitivity (HBM) - JEDEC JS-001-2014 Class 3B VHBM ≥8000 V ESD Sensitivity (CDM) - JEDEC JS-002-2018 Class C3 VCDM ≥1000 V SST-10-IRD-810nm Product Datasheet Absolute Maximum Ratings PDS-003127 Rev 02 ©2023 Luminus Devices, Inc. - All Rights Reserved Absolute Maximum Ratings2
Note 1: Binning based on operation at a current of 350 mA, 20 ms single pulse and a constant junction temperature of Tj = 25°C. Parts are binned and shipped in 0.2 V Vf increments. Note 2: Caution must be taken not to stare at the light emitted from these LEDs. Under special circumstances, the high intensity could damage the eye. Optical and Electrical Characteristics1,2 Parameter Symbol Package Type Unit B90H B130H Forward Current If 350 mA Output Power Typical PO 535 mW Output Power at 1.0 A, t-=20 ms (typ.) PO1.0A 1470 mW Radiant Intensity at 1.0 A, t-=20 ms (typ.) fe 770 410 mW/sr Minimum Forward Voltage1 Vf min 2.8 V Forward Voltage Typical Vf 3.0 V Maximum Forward Voltage1 Vf max 3.4 V Viewing Angle 2 Ø1/2 90 130 deg Peak Wavelength Typical λP 815 nm Centroid Wavelength Typical λc 810 nm FWHM Typical Δλ1/2 30 nm Temperature Coefficient of Forward Voltage TCVf -3.0 mV/ °C Temperature Coefficient of Radiometric Power TCPO -0.2 %/ °C Temperature Coefficient of Wavelength TCl 0.3 nm/ °C Thermal Resistance (Electrical) Rth 2.4 °C/W SST-10-IRD-810nm Product Datasheet Device Characteristics PDS-003127 Rev 02 ©2023 Luminus Devices, Inc. - All Rights Reserved
Relative Output Flux vs. Forward Current Relative Output Flux vs. Temperature SST-10-IRD-810nm Product Datasheet 100% 200% 300% 400% 500% 600% 700% 800% 900% 1000% 1100% Relative Radiometric Power If (A) 80% 82% 84% 86% 88% 90% 92% 94% 96% 98% 100% 102% 104% 106% 0 10 20 30 40 50 60 70 80 90 100 110 Relative Radiometric Power Tj (°C) -0.40 -0.20 0.00 0.20 0.40 0.60 0.80 1.00 1.20 1.40 1.60 1.80 Δ Forward Voltage (Vf) If (A) Relative Forward Voltage vs. Forward Current Relative Forward Voltage vs. Temperature PDS-003127 Rev 02 ©2023 Luminus Devices, Inc. - All Rights Reserved Relative Peak Wavelength vs. Forward Current Relative Peak Wavelength vs. Temperature -2.5 0.0 2.5 5.0 7.5 10.0 12.5 15.0 17.5 20.0 Δ Peak Wavelength (λp) If (A) -7.5 -5.0 -2.5 0.0 2.5 5.0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 0 10 20 30 40 50 60 70 80 90 100 110 Δ Peak Wavelength (λp) Tj (°C) -0.30 -0.27 -0.24 -0.21 -0.18 -0.15 -0.12 -0.09 -0.06 -0.03 0.00 0.03 0.06 0.09 0 10 20 30 40 50 60 70 80 90 100 110 Δ Forward Voltage (Vf) Tj (°C)
Typical Polar Radiation Plot - B90H Typical Polar Radiation Plot - B130H SST-10-IRD-810nm Product Datasheet Angular Distribution and Spectrum Typical Spectrum Permissible Pulse Handling Capability PDS-003127 Rev 02 ©2023 Luminus Devices, Inc. - All Rights Reserved 0.2 0.4 0.6 0.8 1.0 0°10° 20° 30° 40° 50° 60° 70° 80° 90° 0.2 0.4 0.6 0.8 1.0 0°10° 20° 30° 40° 50° 60° 70° 80° 90° 20% 40% 60% 80% 100% 120% 700 720 740 760 780 800 820 840 860 880 900 Relative Intensity Wavelength (nm) If(A) tp(s) D=0.005 D=0.01 D=0.02 D=0.05 D=0.1 D=0.2 D=0.5 D=1
Mechanical Dimensions - B90H Package SST-10-IRD-810nm Product Datasheet PDS-003127 Rev 02 ©2023 Luminus Devices, Inc. - All Rights Reserved 2.70 2.70 0.38 0.38 1.00 0.50 0.50 ANODE CATHODETHERMAL PAD 3.45 3.45 CENTER OF EMITTING AREA Anode R1.08 0.63 2.33 FRONT VIEW SIDE VIEW BACK VIEW REVISIONS ECO REV. DESCRIPTION DATE APPROVED
01 STEP DOCUMENT LOSS UPDATE DRAWING 06/22/2022
D C B AA B C D 12345678 8 7 6 5 4 3 2 1 X = 0.5mm .X = 0.127mm .XX = 0.050mm .XXX = 0.010mm DRAWING, OUTLINE,002730,SST-10-R-B90 X.XIE
1145 SONORA COURT
SUNNYVALE, CA 94086 408-708-7000 DESCRIPTION: SURFACES
0.8 MICRONS
UNLESS OTHERWISE SPECIFIED TOLERANCES ARE MILLIMETERS [INCHES] This document and its contents are confidential information of Luminus Devices, Inc. Copyright 2005 Luminus Device,Inc. All rights reserved. B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:1 OF 2DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: DWG-002730 ANGLES 0.5 PROPRIETARY AND CONFIDENTIAL 2.70 2.70 0.35 0.50 2.70 0.25 0.55 0.40 0.50 0.90 2.70 1.70 Recommended PCB Solder Pad Recommended Stencil Pattern D C B AA B C D 12345678 8 7 6 5 4 3 2 1 25:1 DRAWING, OUTLINE,002730,SST-10-R-B90 X.XIE DESCRIPTION: 01ALL MEASUREMENTS AER 0.13mm UNLESS OTHERWISE SPECIFIED TOLERANCES ARE MILLIMETERS [INCHES] This document and its contents are confidential information of Luminus Devices, Inc. Copyright 2005 Luminus Device,Inc. All rights reserved. B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: PROPRIETARY AND CONFIDENTIAL DWG-002730
2 OF 2
2.70 2.70 0.38 0.38 1.00 0.50 0.50 ANODE CATHODETHERMAL PAD 3.45 3.45 CENTER OF EMITTING AREA Anode R1.08 0.63 2.33 FRONT VIEW SIDE VIEW BACK VIEW REVISIONS ECO REV. DESCRIPTION DATE APPROVED D C B AA B C D 12345678 8 7 6 5 4 3 2 1 X = 0.5mm .X = 0.127mm .XX = 0.050mm .XXX = 0.010mm DRAWING, OUTLINE,002730,SST-10-R-B90 X.XIE SUNNYVALE, CA 94086 408-708-7000 DESCRIPTION: SURFACES UNLESS OTHERWISE SPECIFIED TOLERANCES ARE MILLIMETERS [INCHES] This document and its contents are confidential information of Luminus Devices, Inc. Copyright 2005 Luminus Device,Inc. All rights reserved. B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:1 OF 2DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: DWG-002730 ANGLES 0.5 PROPRIETARY AND CONFIDENTIAL 2.70 2.70 0.38 0.38 1.00 0.50 0.50 ANODE CATHODETHERMAL PAD 3.45 3.45 CENTER OF EMITTING AREA Anode R1.08 0.63 2.33 FRONT VIEW SIDE VIEW BACK VIEW REVISIONS ECO REV. DESCRIPTION DATE APPROVED D C B AA B C D 12345678 8 7 6 5 4 3 2 1 X = 0.5mm .X = 0.127mm .XX = 0.050mm .XXX = 0.010mm DRAWING, OUTLINE,002730,SST-10-R-B90 X.XIE SUNNYVALE, CA 94086 408-708-7000 DESCRIPTION: SURFACES UNLESS OTHERWISE SPECIFIED TOLERANCES ARE MILLIMETERS [INCHES] This document and its contents are confidential information of Luminus Devices, Inc. Copyright 2005 Luminus Device,Inc. All rights reserved. B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:1 OF 2DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: DWG-002730 ANGLES 0.5 PROPRIETARY AND CONFIDENTIAL 2.70 2.70 0.35 0.50 2.70 0.25 0.55 0.40 0.50 0.90 2.70 1.70 Recommended PCB Solder Pad Recommended Stencil Pattern D C B AA B C D 12345678 8 7 6 5 4 3 2 1 25:1 DRAWING, OUTLINE,002730,SST-10-R-B90 X.XIE DESCRIPTION: 01ALL MEASUREMENTS AER 0.13mm UNLESS OTHERWISE SPECIFIED TOLERANCES ARE MILLIMETERS [INCHES] This document and its contents are confidential information of Luminus Devices, Inc. Copyright 2005 Luminus Device,Inc. All rights reserved. B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: PROPRIETARY AND CONFIDENTIAL DWG-002730
Mechanical Dimensions - B130H Package SST-10-IRD-810nm Product Datasheet PDS-003127 Rev 02 ©2023 Luminus Devices, Inc. - All Rights Reserved 3.45 3.45 CENTER OF DIE EMITTING AREA ANODE R1.30 0.68 1.98 2.70 2.70 0.38 0.38 1.00 0.50 0.50 ANODE CATHODETHERMAL PAD FRONT VIEW SIDE VIEW BACK VIEW REVISIONS ECO REV. DESCRIPTION DATE APPROVED
01 RELEASE TO PRODUCTION 9/28/2018
D C B AA B C D 12345678 8 7 6 5 4 3 2 1 X = 0.5mm .X = 0.127mm .XX = 0.050mm .XXX = 0.010mm DRAWING, OUTLINE,002775,SST-10-R-B130 X.XIE SUNNYVALE, CA 94086 408-708-7000 DESCRIPTION: SURFACES UNLESS OTHERWISE SPECIFIED TOLERANCES ARE MILLIMETERS [INCHES] This document and its contents are confidential information of Luminus Devices, Inc. Copyright 2005 Luminus Device,Inc. All rights reserved. B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:1 OF 2DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: DWG-002775 ANGLES 0.5 PROPRIETARY AND CONFIDENTIAL 3.45 3.45 CENTER OF DIE EMITTING AREA ANODE R1.30 0.68 1.98 2.70 2.70 0.38 0.38 1.00 0.50 0.50 ANODE CATHODETHERMAL PAD FRONT VIEW SIDE VIEW BACK VIEW REVISIONS ECO REV. DESCRIPTION DATE APPROVED D C B AA B C D 12345678 8 7 6 5 4 3 2 1 X = 0.5mm .X = 0.127mm .XX = 0.050mm .XXX = 0.010mm DRAWING, OUTLINE,002775,SST-10-R-B130 X.XIE SUNNYVALE, CA 94086 408-708-7000 DESCRIPTION: SURFACES UNLESS OTHERWISE SPECIFIED TOLERANCES ARE MILLIMETERS [INCHES] This document and its contents are confidential information of Luminus Devices, Inc. Copyright 2005 Luminus Device,Inc. All rights reserved. B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:1 OF 2DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: DWG-002775 ANGLES 0.5 PROPRIETARY AND CONFIDENTIAL 2.70 2.70 0.35 0.50 2.70 0.25 0.55 0.40 0.50 0.90 2.70 1.70 Recommended PCB Solder Pad Recommended Stencil Pattern D C B AA B C D 12345678 8 7 6 5 4 3 2 1 25:1 DRAWING, OUTLINE,002775,SST-10-R-B130 X.XIE DESCRIPTION: 01ALL MEASUREMENTS AER 0.13mm UNLESS OTHERWISE SPECIFIED TOLERANCES ARE MILLIMETERS [INCHES] This document and its contents are confidential information of Luminus Devices, Inc. Copyright 2005 Luminus Device,Inc. All rights reserved. B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: PROPRIETARY AND CONFIDENTIAL DWG-002775 2.70 2.70 0.35 0.50 2.70 0.25 0.55 0.40 0.50 0.90 2.70 1.70 Recommended PCB Solder Pad Recommended Stencil Pattern D C B AA B C D 12345678 8 7 6 5 4 3 2 1 25:1 DRAWING, OUTLINE,002775,SST-10-R-B130 X.XIE DESCRIPTION: 01ALL MEASUREMENTS AER 0.13mm UNLESS OTHERWISE SPECIFIED TOLERANCES ARE MILLIMETERS [INCHES] This document and its contents are confidential information of Luminus Devices, Inc. Copyright 2005 Luminus Device,Inc. All rights reserved. B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: PROPRIETARY AND CONFIDENTIAL DWG-002775
Tape and Reel - B90H Package SST-10-IRD-810nm Product Datasheet PDS-003127 Rev 02 ©2023 Luminus Devices, Inc. - All Rights Reserved 8.00±0.10 .315±.004 2.00±0.10 .079±.004 4.00±0.05 .157±.002 1.50+ 0.10 0.00 .059+ .004 .000 1.50±0.10 .059±.004 1.75±0.10 .069±.004 5.50±0.05 .217±.002 12.00±0.20 .472±.008 A A BB CATHODE SIDE ANODE SIDE 3.60±0.10 .142±.004 0.25±0.05 7.0° SECTION A-A 2.48±0.10 .098±.004 3.67±0.10 .144±.004 7.0° SECTION B-B TOP VIEW DETAIL D 178 C .5122.00 .079 21.3 .839 16.0 .630 120° DETAIL C 12.4 .488 3.0 3.8 560 22.0 NOTES: FINAL TAPE AND REEL PACKAGING MUST MEET THE 1. REQUIREMENTS OF JEDEC-STD-033, LEVEL 2A. LEAVE 304.8mm [12.00 in] OF TAPE EMPTY FOR LEAD IN 2. (38 EMPTY POCKETS). LEAVE 457.2mm [18.00 in] OF TAPE EMPTY FOR TRAILER 3. (57 EMPTY POCKETS). MUST COMPLY TO EIA-481-C-20034. UNREELING DIRECTION UNREELING DIRECTION
Tape and Reel - B130H Package SST-10-IRD-810nm Product Datasheet PDS-003127 Rev 02 ©2023 Luminus Devices, Inc. - All Rights Reserved 8.00±0.10 .315±.004 2.00±0.10 .079±.004 4.00±0.10 .157±.004 1.50+ 0.10 0.00 .059+ .004 .000 1.70±0.10 .067±.004 1.75±0.10 .069±.004 5.50±0.05 .217±.002 12.00±0.20 .472±.008 A A BB CATHODE SIDE ANODE SIDE 3.80+ 0.10 0.00 .150+ .004 .000 4.18+ 0.10 0.00 .165+ .004 .000 0.25±0.05 5.0° SECTION A-A 2.20+ 0.10 0.00 .087+ .004 .000 3.80+ 0.10 0.00 .150+ .004 .000 4.18+ 0.10 0.00 .165+ .004 .000 5.0° SECTION B-B TOP VIEW DETAIL D 178 C .5122.00 .079 21.3 .839 16.0 .630 120° DETAIL C 12.4 .488 NOTES: FINAL TAPE AND REEL PACKAGING MUST MEET THE 1. REQUIREMENTS OF JEDEC-STD-033, LEVEL 2A. LEAVE 304.8mm [12.00 in] OF TAPE EMPTY FOR LEAD IN 2. (38 EMPTY POCKETS). LEAVE 457.2mm [18.00 in] OF TAPE EMPTY FOR TRAILER 3. (57 EMPTY POCKETS). MUST COMPLY TO EIA-481-C-20034. UNREELING DIRECTION UNREELING DIRECTION
SST-10-IRD-810nm Product Datasheet PDS-003127 Rev 02 ©2023 Luminus Devices, Inc. - All Rights Reserved Packaging Information Humidity Card (bag) Desiccant (bag) Vacuum sealed antistatic bag Label: contains the type, Lot #, Quality, Product parameters Humidity card (bag) Desiccant (bag) Vacuum sealed anti-static bag Label contains the type, lot number, quantity and product parameters Packaging Reel - 500 parts per reel for B90H Packages - 1,000 parts per reel for B130H Package Label on Reel Label Information CPN Luminus ordering part number MPN For Luminus internal use QTY Quantity of parts per reel Flux Single flux bin code (see Flux Bins table on page 2) Color Single Dominant Wavelength bin code (see Dominant Wavelength Bins table on page 2) Voltage N/A CRI N/A Lot ID & Reel ID For Luminus internal use XXX-XX-X-XXXXX XXXXXX
SST-10-IRD-810nm Product Datasheet PDS-003127 Rev 02 ©2023 Luminus Devices, Inc. - All Rights Reserved Packaging Boxes Shipping Label on Packaging Box Multiple labels are attached to the box (one label per reel inside the box) Label Information CPN Luminus ordering part number CID Customer ID QTY Quantity of parts per reel Flux Single flux bin code (see Flux Bins table on page 2) Voltage N/A Color Single Dominant Wavelength bin code (see Dominant Wavelength Bins table on page 2) CRI N/A Lot ID & Reel ID For Luminus internal use *Capacity 5 reels per box *Capacity 10 reels per box Label: contains the type, Lot #, Quality, Product parameters Box Size 1 - 5 reels per box Size: 22.5 x 24.5 x 6.5 cm Label contains the type, lot number, quantity and product parameters Label contains the type, lot number, quantity and product parameters Box Size 2 - 10 reels per box Size: 22.5 x 24.5 x 13 cm XXX-XX-X-XXXX-XXXXX
SST-10-IRD-810nm Product Datasheet Soldering Profile PDS-003127 Rev 02 ©2023 Luminus Devices, Inc. - All Rights Reserved Notes 1. Product complies to Moisture Sensitivity Level 1 (MSL 1). 2. The numbers in the table are specific to SAC305. Luminus recommends using an SAC305 solder paste with a no-clean flux for RoHS compliant products. 3. During the pick and place process, axial forces on the dome (or window) should not exceed 0.5 Newtons (N). 4. Use of a multi-zone IR reflow oven with a nitrogen blanket is recommended. 5. Time-temperature profile of the reflow process showing the four functional profile zones are defined in IPC-7801. Temperature is referenced to the center of the PCB. 6. Luminus recommends to use the solder paste data sheet information as a starting point in time-temperature process development. 7. These are general guidelines. Consult the solder paste manufacturer’s datasheet for guidelines specific to the alloy and flux combination used in your application. For more information, please refer to: https://luminusdevices.zendesk.com/hc/en-us/articles/360060306692-How-do-I-Reflow-Solder-Luminus-SMD-Components- 8. For any technical questions about soldering process, please contact Luminus at techsupport@luminus.com. SMT Rework Guideline Manual Hotplate Reflow Hot Air Gun Reflow Heating Time < 60 sec Hotplate Temperature < 245°C < 150°C Temperature Time Preheat RT to 150°C 1 - 2.5°C/sec Soak 150°C to 180°C 0.4 - 1°C/sec Reflow 180 to TL + 20°C 3 - 6°C/sec Cool down Peak to below 150°C 3 - 7°C/sec Liquidus Temperature, TL (SAC305 = 220°C) Peak Temperature (235 - 245°C) Time Above Liquidus (45 - 90 sec) 65 -> 200°C, 120 - 250 sec max
SST-10-IRD-810nm Product Datasheet Storage: 1. Before opening the package Unopened LEDs bags should be kept at a temperature between 15°C & 40°C and should be used within a year. 2. After opening the package Opened LED moisture proof packages should be stored between 30 and 60% RH. The LEDs should be soldered within 168 hours (7 days) after opening the package. If unused LEDs remain on a reel, they should be stored in re-sealable moisture proof packages with new absorbent material (silica gel) and new moisture indicator cards, or better, in a dry box. If the moisture card indicates, or the first article run of the LEDs popcorns, an oven baking treatment should be performed using the following conditions: 60°C for 20 hours. The LED electrodes and lead frames may incorporate a silver-plated copper alloy. These can be identified by a silver appearance (com- pared to a gold appearance). This silver surface may be affected by environmental contaminants, particularly sulfur containing com- pounds, during storage, and at the point of use. Please avoid conditions which may cause the LEDs to become corroded or discolored. Corrosion or discoloration can reduce solderability and/or affect optical characteristics. Avoid rapid temperature transitions, especially in high humidity environments where condensation can occur. Static Electricity: These products are sensitive to static electricity, and care should be taken when handling them. Static electricity or surge voltage will damage the LEDs. It is recommended to wear an anti-electrostatic wristband or anti-electrostatic gloves when handling the LEDs. All devices, equipment and machinery must be properly grounded. It is recommended that measures be taken to isolate LED processing equipment from potential sources of voltage surges. Reference: APN-002815 Electrical Stress Damage to LEDs and How to Prevent It Corrosion Resistance: Corrosion Test: Class 3B - Test condition: 40°C / 90% RH / 15ppm H2S / 14 days (stricter than IEC60068 2-43) Precautions for Use PDS-003127 Rev 02 ©2023 Luminus Devices, Inc. - All Rights Reserved
Revision History
Rev Date Description of Change 01 05/19/2021 Initial Release 02 11/17/2023 Add Flux bins, update Drawings and Soldering profile SST-10-IRD-810nm Product Datasheet PDS-003127 Rev 02 ©2023 Luminus Devices, Inc. - All Rights Reserved