SST-08-UV

SST-08-UV LUMINUS | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 16

Technical content

Features

1145 Sonora Ct. • Sunnyvale, CA 94086

Ordering Information

PDS-003184 Rev01 © 2022 Luminus Devices, Inc. - All Rights Reserved Wavelength Range Wavelength Bins Radiometric Flux Solder Pad Viewing Angle Ordering Part Number Min. Flux Bin Min. Flux (mW) 365-375 365, 370 D 630 A 40° SST-08-UV-A40-D365-00 D 630 A 130° SST-08-UV-A130-D365-00 380-390 380, 385 E 720 A 40° SST-08-UV-A40-E385-00 F 810 A 130° SST-08-UV-A130-F385-00 390-400 390, 395 E 720 A 40° SST-08-UV-A40-E395-00 F 810 A 130° SST-08-UV-A130-F395-00 400-410 400, 405 E 720 A 40° SST-08-UV-A40-E405-00 F 810 A 130° SST-08-UV-A130-F405-00 Part Number Nomenclature Product Family Chip Area Color Package Configuration Bin kit SST : Surface Mount Package 08 : 0.8 mm2 class UV A130 : A Solder pad 130° Viewing Angle A40 : A Solder pad 40° Viewing Angle Flux (F) and Wavelength(WWW) bin, See ordering informaton The table below lists ordering part numbers available for SST-08-UV LEDs. The part number includes a bin kit, a group of flux and wavelength bins described in page 3, that are shippable for a given ordering part number. Individual flux or wavelength bins are not orderable . Flux bin listed the minimum bin shipped - higher bins may be included at Luminus’ discretion. Ordering Part Numbers SST-08-UV Product Datasheet

1145 Sonora Ct. • Sunnyvale, CA 94086 PDS-003184 Rev01 © 2022 Luminus Devices, Inc. - All Rights Reserved Binning Structure SST-08-UV LEDs are tested for radiometric flux and wavelength at a drive current of 500 mA, 20 ms single pulse at 25° C and placed into one of the following radiometric flux (F) , wavelength (WWW) and forward voltage bins. The LEDs can also be driven at other drive currents, to achieve the correlated flux values listed in the table. Radiometric Flux Bins Wavelength Bins Wavelength Bin (WWW) Minimum Wavelength (nm)3 Maximum Wavelength (nm)3 365 365 370 370 370 375 380 380 385 385 385 390 390 390 395 395 395 400 400 400 405 405 405 410 Flux Bin (F)1 Minimum Flux 3 (mW) 500 mA, 25° C Maximum Flux 3 (mW) 500 mA, 25° C Correlated Minimum Flux 2 (mW) at 25° C 250 mA 350 mA 700 mA D 630 720 315 440 875 E 720 810 360 500 1000 F 810 900 400 570 1125 G 900 990 450 630 1250 H 990 1080 495 700 1375 Note 1: Individual bins are not orderable. Please refer to product ordering information on page 2 for a list of ordering part numbers. Note 2: Correlated minimum flux values are for reference only. SST-08-UVs are tested and binned only at the test current of 500 mA. Voltage Bin1 Minimum Voltage (V) Maximum Voltage (V) V1 3.0 3.2 V2 3.2 3.4 V3 3.4 3.6 V4 3.6 3.8 V5 3.8 4.0 Forward Voltage Bins SST-08-UV Product Datasheet Note 3: Luminus maintains a +/- 6% tolerance on flux measurements and +/- 1 nm on wavelength measurements.

1145 Sonora Ct. • Sunnyvale, CA 94086 PDS-003184 Rev01 © 2022 Luminus Devices, Inc. - All Rights Reserved Parameter Symbol Typical1 Unit Peak Wavelength Range λ 365-375 380-390 390-400 400-410 nm Test Current2 If 500 500 500 500 mA Forward Voltage Vf-min 3.0 3.0 3.0 3.0 V Vf-typ 3.8 3.6 3.6 3.7 V Vf-max 4.1 4.0 4.0 4.0 V Radiometric Flux3 Φtyp 690 900 870 850 mW FWHM Δλ 10 10 10 10 nm Viewing Angle 2θ1/2 40 / 130 40 / 130 40 / 130 40 / 130 ° Typical Device Performance Note 1: Unless otherwise noted, values listed are typical. Devices are production tested and specified at 500 mA with a 20 ms pulse at 25°C . Note 2: SST-08-UV LEDs are devices are tested at 500 mA, they can be driven at CW currents ranging from 200 mA to 750mA and at duty cycles ranging from 1% to 100%. Drive current and duty cycle should be adjusted as necessary to maintain the junction temperature desired to meet application lifetime requirements. Note 3: Typical radiometric flux is for reference only. Minimum flux values are guaranteed based on the bin kit ordered. For product roadmap and future performance of devices, contact Luminus. SST-08-UV Product Datasheet

1145 Sonora Ct. • Sunnyvale, CA 94086 PDS-003184 Rev01 © 2022 Luminus Devices, Inc. - All Rights Reserved Absolute Maximum Ratings Note 1: SST-08-UV LEDs are designed for operation to an absolute maximum current as specified above. Product lifetime data is specified at or below maximum drive current. Sustained operation beyond absolute maximum currents will result in a reduction of device life time . Actual device lifetimes will also depend on case temperature and operation beyond maximum case temperature is not recommended. Contact Luminus for lifetime derating curves and for fur- ther information. In pulsed operation, rise time from 10-90% of forward current should be longer than 0.5 μseconds. Parameter Symbol Value Unit Forward Current1 If-max 750 mA Junction Temperature1 Tj 100 ° C Storage Temperature Range TS -40 to +100 ° C Soldering Temperature TSLD JEDEC J-STD-020C, 245°C ° C SST-08-UV Product Datasheet

Optical & Electrical Characteristics - 365 nm

1145 Sonora Court, Sunnyvale, CA 94086 USA

Relative Power vs. Forward Current φ/φ(500 mA) , 20 ms pulse, Tc= 25°C Forward Voltage vs. Forward Current 25°C , 20 ms pulse 20% 40% 60% 80% 100% 120% 140% 160% Relative Radiometric Power If (A) PDS-003184 Rev01 © 2022 Luminus Devices, Inc. - All Rights Reserved Peak Wavelength Shift vs. Forward Current λp= λp(If ) - λp (500 mA), 20 ms pulse, Tc = 25°C Peak Wavelength Shift vs. Case Temperature λp= λp(Tc) - λp (25°C), 20 ms pulse, If =500 mA Forward Voltage Shift vs. Case Temperature ΔVf = Vf(Tc) - Vf(25°C), 20 ms pulse, If = 500 mA Relative Power vs. Case Temperature φ/φ(25°C) , 20 ms pulse, 500 mA 3.20 3.30 3.40 3.50 3.60 3.70 3.80 3.90 4.00 4.10 Forward Voltage (Vf) If (A) SST-08-UV Product Datasheet

Optical & Electrical Characteristics - 385 nm Relative Power vs. Forward Current φ/φ(500 mA) , 20 ms pulse, Tc= 25°C Forward Voltage vs. Forward Current 25°C , 20 ms pulse 20% 40% 60% 80% 100% 120% 140% 160% Relative Radiometric Power If (A) PDS-003184 Rev01 © 2022 Luminus Devices, Inc. - All Rights Reserved Peak Wavelength Shift vs. Forward Current λp= λp(If ) - λp (500 mA), 20 ms pulse, Tc = 25°C Peak Wavelength Shift vs. Case Temperature λp= λp(Tc) - λp (25°C), 20 ms pulse, If =500 mA Forward Voltage Shift vs. Case Temperature ΔVf = Vf(Tc) - Vf(25°C), 20 ms pulse, If = 500 mA Relative Power vs. Case Temperature φ/φ(25°C) , 20 ms pulse, 500 mA 3.00 3.10 3.20 3.30 3.40 3.50 3.60 3.70 3.80 3.90 Forward Voltage (Vf) If (A) SST-08-UV Product Datasheet

Optical & Electrical Characteristics - 395 nm Relative Power vs. Forward Current φ/φ(500 mA) , 20 ms pulse, Tc= 25°C Forward Voltage vs. Forward Current 25°C , 20 ms pulse 20% 40% 60% 80% 100% 120% 140% 160% Relative Radiometric Power If (A) PDS-003184 Rev01 © 2022 Luminus Devices, Inc. - All Rights Reserved Peak Wavelength Shift vs. Forward Current λp= λp(If ) - λp (500 mA), 20 ms pulse, Tc = 25°C Peak Wavelength Shift vs. Case Temperature λp= λp(Tc) - λp (25°C), 20 ms pulse, If =500 mA Forward Voltage Shift vs. Case Temperature ΔVf = Vf(Tc) - Vf(25°C), 20 ms pulse, If = 500 mA Relative Power vs. Case Temperature φ/φ(25°C) , 20 ms pulse, 500 mA 3.00 3.10 3.20 3.30 3.40 3.50 3.60 3.70 3.80 3.90 Forward Voltage (Vf) If (A) SST-08-UV Product Datasheet

Optical & Electrical Characteristics - 405 nm Relative Power vs. Forward Current φ/φ(500 mA) , 20 ms pulse, Tc= 25°C Forward Voltage vs. Forward Current 25°C , 20 ms pulse 20% 40% 60% 80% 100% 120% 140% 160% Relative Radiometric Power If (A) PDS-003184 Rev01 © 2022 Luminus Devices, Inc. - All Rights Reserved Peak Wavelength Shift vs. Forward Current λp= λp(If ) - λp (500 mA), 20 ms pulse, Tc = 25°C Peak Wavelength Shift vs. Case Temperature λp= λp(Tc) - λp (25°C), 20 ms pulse, If =500 mA Forward Voltage Shift vs. Case Temperature ΔVf = Vf(Tc) - Vf(25°C), 20 ms pulse, If = 500 mA Relative Power vs. Case Temperature φ/φ(25°C) , 20 ms pulse, 500 mA 3.00 3.10 3.20 3.30 3.40 3.50 3.60 3.70 3.80 3.90 4.00 Forward Voltage (Vf) If (A) SST-08-UV Product Datasheet

Radiation Pattern - 130° Radiation Pattern - 40° PDS-003184 Rev01 © 2022 Luminus Devices, Inc. - All Rights Reserved SST-08-UV Product Datasheet Angular Distribution and Spectrum

If = 0.5A, Tc= 25°C, 20 ms pulse 0.0 0.2 0.4 0.6 0.8 1.0 280 300 320 340 360 380 400 420 440 460 480 500 Relative Intensity Wavelength (nm) 365 nm 385 nm 395 nm 405 nm PDS-003184 Rev01 © 2022 Luminus Devices, Inc. - All Rights Reserved SST-08-UV Product Datasheet

1145 Sonora Ct. • Sunnyvale, CA 94086 PDS-003184 Rev01 © 2022 Luminus Devices, Inc. - All Rights Reserved SST-08-UV Product Datasheet Solder Profile Note 1: Product complies to Moisture Sensitivity Level 1 (MSL 1). Note 2: The numbers in the table are specific to SAC305. Luminus recommends using an SAC305 solder paste with a no-clean flux for RoHS compliant products. Note 3: During the pick and place process, axial forces on the dome (or window) should not exceed 0.5 Newtons (N). Note 4: Use of a multi-zone IR reflow oven with a nitrogen blanket is recommended. Note 5: Time-temperature profile of the reflow process showing the four functional profile zones are defined in IPC-7801. Temperature is referenced to the center of the PCB. Note 6: Luminus recommends to use the solder paste data sheet information as a starting point in time-temperature process development. Note 7: These are general guidelines. Consult the solder paste manufacturer’s datasheet for guidelines specific to the alloy and flux combination used in your application. For more information, please refer to: https://luminusdevices.zendesk.com/hc/en-us/articles/360060306692-How-do-I-Reflow-Solder-Luminus-SMD-Components- Note 8: For any technical questions about soldering process, please contact Luminus at techsupport@luminus.com. SMT Rework Guideline Manual Hotplate Reflow Hot Air Gun Reflow Heating Time < 60 sec Hotplate Temperature < 245°C < 150°C Temperature Time Preheat RT to 150 °C 1 - 2.5 °C/sec Soak 150 °C to 180°C 0.4 - 1 °C/sec Reflow 180 to TL + 20°C 3 - 6 °C/sec Cool down Peak to below 150°C 3 - 7 °C/sec Liquidus Temperature, TL (SAC305 = 220 °C) Peak Temperature (235 - 245 °C) Time Above Liquidus (45 - 90 sec) 65 -> 200 °C, 120 - 250 sec max

Mechanical Dimensions - A130 Package 1145 Sonora Ct. • Sunnyvale, CA 94086 PDS-003184 Rev01 © 2022 Luminus Devices, Inc. - All Rights Reserved 3.45 3.45 FRONT VIEWANODE OPTICAL REFERENCE R1.30 0.68 1.98 1.30 SIDE VIEW CATHODE ANODE THERMAL PAD (NEUTRAL) BACK VIEW REVISIONS ECO REV. DESCRIPTION DATE APPROVED A 05/20/2022 D C B AA B C D 12345678 8 7 6 5 4 3 2 1 X = 0.5mm .X = 0.127mm .XX = 0.050mm .XXX = 0.010mm NONE DRAWING,OUTLINE,SST-08-UV-A130 X.XIE

1145 SONORA COURT

SUNNYVALE, CA 94086 408-708-7000 DESCRIPTION: A SURFACES

0.8 MICRONS

UNLESS OTHERWISE SPECIFIED TOLERANCES ARE MILLIMETERS [INCHES] This document and its contents are confidential information of Luminus Devices, Inc. Copyright 2005 Luminus Device,Inc. All rights reserved. B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:1 OF 2DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: DWG- ANGLES 0.5 PROPRIETARY AND CONFIDENTIAL 0.50 0.48 3.25 3.25 0.48 0.58 0.75 0.25 3.25 1.15 2.30 3.25 1.30 Recommended PCB Solder Pad Recommended Stencil Pattern D C B AA B C D 12345678 8 7 6 5 4 3 2 1 25:1 DRAWING, OUTLINE,SST-08-UV-A130 X.XIE DESCRIPTION: AMILLIMETERS [INCHES] This document and its contents are confidential information of Luminus Devices, Inc. Copyright 2005 Luminus Device,Inc. All rights reserved. B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: PROPRIETARY AND CONFIDENTIAL ALL MEASUREMENTS AER 0.13mm UNLESS OTHERWISE SPECIFIED TOLERANCES ARE DWG-

2 OF 2

Mechanical Dimensions - A40 Package 3.45 3.45 FRONT VIEW ANODE OPTICAL REFERENCE 2.28 2.87 SIDE VIEW CATHODE ANODE THERMAL PAD (NEUTRAL) BACK VIEW REVISIONS ECO REV. DESCRIPTION DATE APPROVED A 05/20/2022 D C B AA B C D 12345678 8 7 6 5 4 3 2 1 X = 0.5mm .X = 0.127mm .XX = 0.050mm .XXX = 0.010mm NONE DRAWING,OUTLINE,SST-08-UV-A40 X.XIE SUNNYVALE, CA 94086 408-708-7000 DESCRIPTION: A SURFACES UNLESS OTHERWISE SPECIFIED TOLERANCES ARE MILLIMETERS [INCHES] This document and its contents are confidential information of Luminus Devices, Inc. Copyright 2005 Luminus Device,Inc. All rights reserved. B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:1 OF 2DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: DWG- ANGLES 0.5 PROPRIETARY AND CONFIDENTIAL 0.50 0.48 3.25 3.25 0.48 0.58 0.75 0.25 3.25 1.15 2.30 3.25 1.30 Recommended PCB Solder Pad Recommended Stencil Pattern D C B AA B C D 12345678 8 7 6 5 4 3 2 1 25:1 DRAWING, OUTLINE,SST-08-UV-A40 X.XIE DESCRIPTION: AMILLIMETERS [INCHES] This document and its contents are confidential information of Luminus Devices, Inc. Copyright 2005 Luminus Device,Inc. All rights reserved. B SCALE: ENGINEER: NUMBER:DRAFTER: SIZE: REV:DIMENSIONS ARE IN (UNLESS OTHERWISE SPECIFIED): SHEET: PROPRIETARY AND CONFIDENTIAL ALL MEASUREMENTS AER 0.13mm UNLESS OTHERWISE SPECIFIED TOLERANCES ARE DWG- Note 1: All dimensions are in millimeter +/-0.13 mm

1145 Sonora Ct. • Sunnyvale, CA 94086 PDS-003184 Rev01 © 2022 Luminus Devices, Inc. - All Rights Reserved Packaging Information &$7+2'(6,'( $12'(6,'( 6(&7,21$$ 6(&7,21%% 7239,(: '(7$,/' '(7$,/& 127(6 (037<32&.(76 (037<32&.(76 0867&203/<72(,$& 815((/,1*',5(&7,21 815((/,1*',5(&7,21 Note 1: Maximum of 500 pcs/reel. Lower quantities may be shipped. SST-08-UV Product Datasheet SST

1145 Sonora Ct. • Sunnyvale, CA 94086 1. UV Light SST-08-UV LEDs are short wavelength, UV LEDs. During operation, the LED emits high intensity UVA radiation, which is harmful to skin and eyes, and may cause cancer. Avoid exposure to UV light when LED is operational. 2. Static Electricity (ESD) While SST-08 LEDs are robust in nature, they are particularly sensitive to ESD (Electrostatic Discharge). Static electricity and surge voltages seriously damage UV LEDs and can result in complete failure of the device. Anti-electrostatic wristband or gloves are recommended when handling the LEDs. All devices, equipment and machinery must be properly grounded and precautions must be taken against surge voltages. Reference: APN-002815 Electrical Stress Damage to LEDs and How to Prevent It 3. Operating Conditions In order to ensure the correct functioning of these LEDs, compliance to maximum allowed specifications is important. UV LEDs are particularly sensitive to drive currents that exceed the max operating specifications and may be damaged by such drive curents. The use of current regulated drive circuits is strongly recommended when operating these devices. Customers should also provide adequate thermal management to ensure LEDs do not exceed maximum recommended temperatures. Operating LEDs at temperatures in excess of specification will result in damage and possibly complete failure of the device. Precautions for storage, handling and use of UV LEDs PDS-003184 Rev01 © 2022 Luminus Devices, Inc. - All Rights Reserved SST-08-UV Product Datasheet

1145 Sonora Ct. • Sunnyvale, CA 94086

Revision History

Rev Date Description of Change 01 08/26/2022 Initial Release PDS-003184 Rev01 © 2022 Luminus Devices, Inc. - All Rights Reserved SST-08-UV Product Datasheet