SST-90-R LUMINUS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 14

Technical content

Applications

  • Machine vision
  • High-output strobing applications
  • Beacons, obstruction lighting
  • Industrial Applications
  • Consumer Portable
  • Medical Lighting
  • Emergency Vehicle Lighting
  • Displays and Signage
  • High-output, directional transporta- tion lighting
  • Search Light Features:
  • Extremely high optical output Red LEDs: Typ.1500 lumens at 9A
  • High thermal conductivity package - junction to case thermal resistance of only 0.5 °C/W
  • Large, monolithic chip with uniform emitting area of 9 mm2
  • Environmentally friendly: RoHS compliant
  • Variable drive currents: less than 1 A through 18 A continuous waveform
  • High reliability
  • Electrically isolated thermal path Table of Contents Part Number Nomenclature 4 Product Shipping & Optical & Electrical Characteris- Mechanical Dimensions .. 10 PDS-002760 Rev 01 © 2015 Luminus Devices, Inc. - All Rights Reserved

175 New Boston Street • Woburn, MA 01801

SST-90-R Product Datasheet

Luminus surface mount LEDs are typically tested with a 20mSec input pulse and a junction temperature of 25ºC. Expected flux values in real world operation can be extrapolated based on the information contained within this product data sheet. Multiple Operating Points (3.15, 9.0 A and above) The tables on the following pages provide typical optical and electrical characteristics. Since the LEDs can be operated over a wide range of drive conditions (currents from less than 1.0 A to

18.0 A, and duty cycle from <1% to 100%), multiple drive

conditions are listed. SST-90 LEDs are production tested at 3.15 A. The values shown at 9.0 A are for additional reference at other possible drive conditions. Understanding Luminus LED Test Specifications Every Luminus LED is fully tested to ensure that it meets the high quality standards expected from Luminus’ products. PDS-002760 Rev 01 © 2015 Luminus Devices, Inc. - All Rights Reserved SST-90-R Product Datasheet Luminus Technology Luminus’ technology enables large area LED chips with uniform brightness over the entire LED chip surface. The optical power and brightness produced by these large monolithic chips enable solutions which replace arc and halogen lamps where arrays of traditional high power LEDs cannot. Packaging Technology Thermal management is critical in high power LED applications. With a thermal resistance from junction to case of 0.5°C/W. Luminus SST-90 LEDs have the lowest thermal resistance of any LED on the market. This allows the LED to be driven at higher current densities while maintaining a low junction temperature, thereby resulting in brighter solutions and longer lifetimes. Reliability Designed from the ground up, Luminus LEDs are one of the most reliable light sources in the world today. Luminus LEDs have passed a rigorous suite of environmental and mechanical stress tests, including mechanical shock, vibration, temperature cycling and humidity, and have been fully qualified for use in extreme high power and high current applications. With very low failure rates and median lifetimes that typically exceed 60,000 hours, Luminus LEDs are ready for even the most demanding applications. Environmental Benefits Luminus LEDs help reduce power consumption and the amount of hazardous waste entering the environment. All LED products manufactured by Luminus are RoHS compliant and free of hazardous materials, including lead and mercury. Technology Overview Luminus LEDs™ benefit from a suite of innovations in the fields of chip technology, packaging and thermal management. These breakthroughs allow illumination engineers and designers to achieve solutions that are high brightness and high efficiency.

PDS-002760 Rev 01 © 2015 Luminus Devices, Inc. - All Rights Reserved SST-90-R Product Datasheet SST-90 Red Bins Structure1,2 SST-90 Red LEDs are specified for luminous flux and wavelength at a drive current of 3.15 A (0.35 A/mm2) and placed into one of the following luminous flux (FF) and wavelength (WW) bins: Note 1: Luminus maintains a +/- 6% tolerance on flux measurements. Note 2: Only specific bins are available for large order, contact Luminus sales team for more information. Color Luminous Flux Bin (FF) Minimum Flux (lm) @ 3.15A Maximum Flux (lm) @ 3.15A Red BG 275 350 BH 350 475 BJ 475 600 BK 600 770 BM 770 970 Flux Bins Color Wavelength Bin (FF) Minimum Wavelength @ 3.15A Maximum Wavelength @ 3.15A Red R2 611 615 R3 615 619 R4 619 623 R5 623 627 Wavelength Bins

PDS-002760 Rev 01 © 2015 Luminus Devices, Inc. - All Rights Reserved SST-90-R Product Datasheet Part Number Nomenclature Product Family LED Emission Area Color Package Configuration Bin kit SST: Surface mount device, Encapsulated SSR: Surface mount device mounted on an aluminum star board 90: 9.0 mm2 <Y>: Color R = Red F11: 10.0 mm x 11.0 mm - Surface mount, shipped in 25 unit trays. R11: Surface mount device mounted on an aluminum star board Flux and Chromaticity bin kit code - See available ordering codes below SST-90 Bin Kit Order Codes The following tables describe the bin kit ordering codes available for the SST-90 and SSR-90 products. Each bin kit specifies a minimum flux as well as specific chromaticity bins allowed. Please note that within each kit a maximum flux is not specified and as a result Luminus may ship any part meeting or exceeding the minimum flux specification. Shipments will always meet the listed chromaticity bins. For information on ordering bin kits not listed below, please contact Luminus or an official distributor. Color Luminous Flux Wavelength Bins Kit NumberBin Kit Flux Code Min. Flux Red HG 275 R2, R3, R4, R5 HG100 R3, R4 HG102 HH 350 R2, R3, R4, R5 HH100 R3, R4 HH102 HJ 475 R2, R3, R4, R5 HJ100 R3, R4 HJ102

PDS-002760 Rev 01 © 2015 Luminus Devices, Inc. - All Rights Reserved SST-90-R Product Datasheet Product Shipping & Labeling Information3 All SST-90 products are packaged and labeled with their respective bin as outlined in the tables on page 4. When shipped, each package will only contain one flux and chromaticity bin. The part number designation is as follows: SST 90 X F11 FF WW Product Family Chip Area Color Package Configuration Flux Bin Wavelength Bin Surface Mount (Lens) 9.0 mm2 R: Red F11: Surface mount, shipped in 25 unit trays. R11: Surface mount Starboard PCB, shipped in trays. See page 3 for bins See page 3 for bins Example: The part number SST-90-R-F11-BJ-R3 refers to a red, SST-90 surface mount, with a flux range of 475-600 lumens and a wavelength range of 615 nm to 619 nm. Note 3: Some flux and chromaticity/ wavelength bins may have limited availability. Application specific bin kits, consisting of multiple bins, may be available. For ordering information, please refer to pages 4 and 5.

PDS-002760 Rev 01 © 2015 Luminus Devices, Inc. - All Rights Reserved SST-90-R Product Datasheet Optical & Electrical Characteristics4,5 Red Drive Condition5 3.15 A Continuous 9.0 A Continous Parameter Symbol Values6 Unit Current Density j 0.35 1.0 A/mm2 Forward Voltage VF min 1.8 - V VF 2.1 2.5 V VF max 2.8 - V Radiometric Power Φr typ 2.4 6.4 W Luminous Flux7 ΦV typ 540 1500 lm Dominant Wavelength7 λd 617 618 nm FWHM Δλ1/2 14 15 nm Chromaticity Coordinates8,9 (Typ.) x 0.685 0.687 - y 0.315 0.313 - Relative Output Flux vs. Forward Current 20ms, single pulse, Tj=25C Forward Current vs. Forward Voltage 20ms, single pulse, Tj=25C Notes: See page 7

PDS-002760 Rev 01 © 2015 Luminus Devices, Inc. - All Rights Reserved SST-90-R Product Datasheet Absolute Maximum Ratings Common Characteristics Symbol Red Unit Emitting Area 9.0 mm2 Emitting Area Dimensions 3.0x3.0 mmxmm Dynamic Resistance Ωdyn 0.03 Ω Thermal Coefficient of Photometric Flux -0.96 %/ ºC Thermal Coefficient of Radiometric Flux -0.52 %/ ºC Thermal Coefficient of Junction Voltage -1.3 mV/ ºC Note 10: Special design considerations must be observed for operation under 1A. Please contact Luminus for further information. Note 11: SST-90 R LEDs are designed for operation to an absolute maximum current as specified above. Product lifetime data is specified at recommended forward drive currents. Sustained operation at or beyond absolute maximum currents will result in a reduction of device life ime compared to recommended forward drive currents. Actual device lifetimes will also depend on junction temperature. Refer to the lifetime derating curves for further information. In pulsed operation, rise time from 10-90% of forward current should be larger than 0.5 microseconds. Note 12: Lifetime dependent on LED junction temperature. Input power and thermal system must be properly managed to ensure lifetime. See charts on page 8 for further information. Symbol Red Unit Absolute Minimum Current (CW or Pulsed)10 Ifmin 0.2 A Absolute Maximum Current (CW)11 Ifmax 18 A Absolute Maximum Surge Current (t=20ms, duty cycle <=25%)11 22.5 A Absolute Maximum Junction Temperature12 Tjmax 110 ºC Storage Temperature Range -40/+100 ºC Optical & Electrical Characteristics Notes Note 4: All ratings are based on a junction test temperature Tj = 25ºC. See Thermal Resistance section for Tj definition. Note 5: Listed drive conditions are typical for common applications. SST-90 R devices can be driven at continuous currents ranging from <1.0 A to 9.0 A and at duty cycles ranging from 1% to 100%. Drive current and duty cycle should be adjusted as necessary to maintain the junction temperature desired to meet application lifetime requirements. Note 6: Unless otherwise noted, values listed are typical. Devices are production tested and specified at 3.15A. Other values are for reference only. Note 7: Total flux from emitting area at listed dominant wavelength. Reported performance is included to show trends for a selected power level. For specific minimum and maximum values, use bin tables. For product roadmap and future performance of devices, contact Luminus. Note 8: In CIE 1931 chromaticity diagram coordinates, normalized to X+Y+Z=1. Note 9: For reference only.

PDS-002760 Rev 01 © 2015 Luminus Devices, Inc. - All Rights Reserved SST-90-R Product Datasheet Light Output and Spectral Characteristics Over Heat Sink Temperature Note 13: Median lifetime estimate as a function of junction temperature at 0.35A/mm2 in continuous operation. Lifetime defined as time to 70% of initial intensity. Based on preliminary lifetime test data. Data can be used to model failure rate over typical product lifetime. Note 14: Lumen maintenance vs. time at 0.35A/mm2 in continuous operation and junction temperature of 70ºC. Note 15: Typical spectrum at current density of 0.35 A/mm2 in continuous operation. Median Lifetime Estimate vs. Tj

13 Lumen Maintenance14

PDS-002760 Rev 01 © 2015 Luminus Devices, Inc. - All Rights Reserved SST-90-R Product Datasheet Thermal Resistance Typical Thermal Resistance16,17 Note 16: Thermal resistance values are based on FEA model results correlated to measured Rθj-hs data. Note 17: Thermal resistance is measured using a SAC305 solder, a Bergquist Al-clad MCPCB, and eGraf 1205 thermal interface material. Ths de/f_inition = 3 mm from core-board Tj Tc Ths Die Junction Window Frame Ceramic Substrate Aluminum Core Board Heat Sink Tb Dome Typical Polar Radiation Pattern for Red 30° 60°-60° -30° Rj-c 1 0.50 ºC/W Rj-b 1 1.20 ºC/W Rj-hs 2 1.40 ºC/W

1100 Technology Park Drive • Billerica, MA 01821

SST-90-R Product Datasheet Mechanical Dimensions – SST-90 Over-Molded For detailed drawing please refer to DWG-002519 document PDS-002760 Rev 01 © 2015 Luminus Devices, Inc. - All Rights Reserved 10.00+ .15 .00 11.00+ .15 .00 3.0 DIE EMITTING AREA 3.0 DIE EMITTING AREA E E S 8.00 4.42 TOP OF DIE EMITTING AREA TO TOP OF OVERMOLDED LENS 5.32±.13 SECTION E-E 5.1 7.1 9.9 1.4 3X 9.0 NOTCH INDICATES ANODE (+) 9.9 1.4 3X 9.0 5.1 7.1 RECOMMENDED SOLDER PAD LAYOUT DIMENSIONS IN MILLIMETERS Note: Luminus currently ships both an overmolded and a glass lens-based version of the SST-90 package that are functionally compatible

PDS-002760 Rev 01 © 2015 Luminus Devices, Inc. - All Rights Reserved Mechanical Dimensions – SST-90 with metal frame and glass lens (Original Design) SST-90-R Product Datasheet For detailed drawing please refer to DWG-001359 document

PDS-002760 Rev 01 © 2015 Luminus Devices, Inc. - All Rights Reserved Mechanical Dimensions – SST-90 Star Board18,19,20 SST-90-R Product Datasheet Note 18: Recommended mounting screw: M3 or #4 Note 19: All dimensions in millimeters Note 20: All anode pads on board are interconnected. All cathode pads on board are interconnected 1.4 TYP 3.0 TYP 16.1 SOLDER PADS 7.0 4.0 60° 19.0 R1.6 TYP 19.9 TYP 60° 7.1 CATHODE PADSANODE PADS

Temperature (ºC) Time (sec) 30 60 90 120 150 180 210 240 270 300 100 125 150 175 200 225 250 Note 21: Temperatures are taken and monitored at the component copper layer. Note 22: Optimum profile may differ due to oven type, circuit board or assembly layout. Note 23: Recommended lead free, no-clean solder: AIM NC254-SAC305. Note 24: Refer to APN-001473 soldering and handling application note for additional solder profiles and details. Note 25: MSL- Level 2A Solder Profile PDS-002760 Rev 01 © 2015 Luminus Devices, Inc. - All Rights Reserved SST-90-R Product Datasheet Lead free solder guideline for low density boards Solder Profile Stage Lead-Free Solder Lead-based Solder Profile length, Ambient to Peak 2.75 - 3.5 minutes 2.75 - 3.5 minutes Time Maintained Above: Temperature 217 ºC 183 ºC Time Maintained Above: Time 30 - 60 seconds 30 - 60 seconds Cooldown Rate ≤4º C/sec ≤4º C/sec Cooldown Duration 45 ± 15 sec 45 ± 15 sec SAC 305 Reflow Profile Window For Low Density Boards

Rev Date Description of Change 01 09/22/2015 - Editorial fixes - Created separate new datasheet for SST-90-R (this datasheet) and removed from PDS-001342 Rev 14 (SST-90-W) - Added change history - Merged Binning and Labelling document (PDS-001692) into the product datasheet. PDS-001692 has been obsoleted. History of Changes PDS-002760 Rev 01 © 2015 Luminus Devices, Inc. - All Rights Reserved SST-90-R Product Datasheet The products, their specifications and other information appearing in this document are subject to change by Luminus Devices without notice. Luminus Devices assumes no liability for errors that may appear in this document, and no liability otherwise arising from the application or use of the product or information contained herein. None of the information provided herein should be considered to be a representation of the fitness or suitability of the product for any particular application or as any other form of warranty. Luminus Devices’ product warranties are limited to only such warranties as accompany a purchase contract or purchase order for such products. Nothing herein is to be construed as constituting an additional warranty. No information contained in this publication may be considered as a waiver by Luminus Devices of any intellectual property rights that Luminus Devices may have in such information. Big Chip LEDs™ is a registered trademark of Luminus Devices, Inc., all rights reserved. This product is protected by U.S. Patents 6,831,302; 7,074,631; 7,083,993; 7,084,434; 7,098,589; 7,105,861; 7,138,666; 7,166,870; 7,166,871; 7,170,100; 7,196,354; 7,211,831; 7,262,550; 7,274,043; 7,301,271; 7,341,880; 7,344,903; 7,345,416; 7,348,603; 7,388,233; 7,391,059 Patents Pending in the U.S. and other countries.