SSP6A NOVARIS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 2

Technical content

Ordering Information

Technical Information Sheet www.novaris.com.au

72 Browns Road, Kingston Tasmania 7050 Australia

Phone +61 3 6229 7233 Fax +61 3 6229 9245 E-mail sales@novaris.com.au SSP6A - Slimline Series Surge Protectors SSP6A (0072-D1V2) SSP6A module SCN SCN SSP6A module SCN SCN SSP6A-... -G base-EC90 base 68 mm 102 mm 7 mm A High Current Series Surge Protectors Novaris slimline surge protection devices (SPDs) provide surge protection for most twisted pair signaling schemes. Load current up to 6 A The SSP6A series surge protectors complement the SL range for applications of load currents up to 6A. Typical applications may include power supplies, digital outputs and other low voltage requirements up to 6A. Two different earthing options With two different base options the SSP6A protectors offer either direct earthing via DIN rail, for the most effective, low impedance earth connection (-G base) or a connection via GDT to the DIN rail, offering isolation under normal conditions and equipotential bonding during a surge (-EC90 base). Slimline pluggable modules The plug-in design provides simple and rapid replacement and testing - no rewiring needed. This also provides a convenient method of field equipment isolation if required. Model Signal Type Base Option Hazardous Area Product direct earthing indirect earthing SSP6A-14 12 VDC – -G -EC90 IS-SSP6A-14 SSP6A-26 24 VDC 12 VAC -G -EC90 IS-SSP6A-26 SSP6A-38 36 VDC 24 VAC -G -EC90 IS-SSP6A-38 SSP6A-65 48 VDC 48 VAC -G -EC90 – SSP6A-130 110 VAC 110 VAC -G -EC90 –

www.novaris.com.au Phone +61 3 6229 7233 Fax +61 3 6229 9245 E-mail sales@novaris.com.au Novaris has a policy of continuing product development, therefore specifications are subject to change without notice. Copyright: © 2016 Novaris Pty Ltd Phone +61 3 6229 7233 Fax +61 3 6229 9245 E-mail sales@novaris.com.au Phone +61 3 6229 7233 Fax +61 3 6229 9245 E-mail sales@novaris.com.au Model SSP6A-14 SSP6A-26 SSP6A-38 SSP6A-65 SSP6A-130 Electrical Specifications Connection Type Series Series Series Series Series Number of lines 1 pair 1 pair 1 pair 1 pair 1 pair Modes of protection Transverse and common mode Maximum continuous voltage (DC) Uc 14 V 26 V 38 V 65 V 170 V Maximum continuous voltage (AC) Uc 11 V 20 V 30 V 50 V 130 V Maximum discharge current (8/20 µs) Imax 4.8 kA per line (9.6 kA common mode) 1.8 kA per line (3.6 kA CM) Maximum discharge current (10/350 µs) Iimp – Impulse durability C2 10 x 2.5 kA 8/20 µs C2 10 x 1 kA 8/20 µs Maximum load current IL 6 A L-L Voltage protection level @ 1 kV/ µs Up 35 V 55 V 75 V 130 V 450 V L-L Voltage protection level @ 3 kA 8/20 µs Up 70 V 95 V 105 V 210 V – L-L Voltage protection level @ 100 V/ s 20 V 35 V 55 V 90 V 220 V L-PE Voltage protection level @ 1 kV/ µs Up 35 V 55 V 75 V 130 V 450 V L-PE Voltage protection level @ 3 kA 8/20 µs Up 70 V 95 V 105 V 210 V – L-PE Voltage protection level @ 100 V/ s 20 V 35 V 55 V 90 V 220 V AC durability 5 x 1 s, 1 Arms 5 x 1 s, 1 Arms 5 x 1 s, 1 Arms 5 x 1 s, 1 Arms 5 x 1 s, 1 Arms Overstressed fault mode Mode 3 (open circuit) Response time tA < 5 ns < 5 ns < 5 ns < 5 ns < 5 ns Line inductance – – – – – L-L capacitance 48 nF 28 nF 16 nF 4 nF 16 nF L-PE capacitance 48 nF 28 nF 16 nF 4 nF 20 nF 3 dB Frequency @ 150 Ω fc 80 kHz 80 kHz 80 kHz 80 kHz 80 kHz Mechanical Specifications Operating temperature -40 to +70 ºC Humidity Range 5 to 95% non–condensing Connection type / capacity 0.25 – 2.5 mm2 cage clamp Terminal screw torque 0.5 Nm Environmental IP20 / indoor Dimensional Drawing A Mounting TS35 DIN rail Earthing - Direct earth connection via DIN rail ans screw terminals with -G base option - 90 V isolation between DIN rail earth and shield with -EC90 base option Enclosure / Colour Polycarbonate UL 94 V-0 / black Standards IEC 61643-21:2012 SPD connected to telecommunications and singalling networks - Cat C2 AS/NZS 1768:2007 Signalling/Telecommunications surge protection UL 1499 3rd edition & UL 497B Protectors for data communications and fire-alarm circuits ITU-T K.44: 2012 Resistibility tests for telecommunication equipment exposed to overvoltages and overcurrents AS/CA S008:2010 Requirements for Customer Cabling Products AS/NZS 4117:1999 Surge Protective Devices for Telecommunications Applications Shipping Weight 35 g 35 g 35 g 35 g 35 g Customs Tariff 85363000 85363000 85363000 85363000 85363000