SSS-CLD-N2P-1 DOMINANT | Alldatasheet

Document overview

  • Manufacturer or author: pROVIDED bY alldatasheet.com(free datasheet download site)
  • PDF pages: 9

Technical content

19/05/05 S SpiceLED AlInGaP SSx-CLD-v3 Page 1 of 1 Surface Mount AlInGaP Spice LED : SSx-CLD Note: The center pad is a common cathode. Please take care during soldering to avoid shorting.

  • High brightness diffused surface mount LED.
  • Super wide viewing angle of 160°.
  • Equivalent to 0603 package outline. Copper lead-frame construction.
  • Qualified according to JEDEC moisture sensitivity Level 2.
  • Compatible to IR reflow soldering.

19/05/05 S SpiceLED AlInGaP SSx-CLD-v3 Page 2 of 2 Part Ordering Number Chip Technology / Color Viewing Angle Luminous Intensity @ If = 20mA, Iv ( mcd ) SSS-CLD-N2P-1

  • SSS-CLD-N2
  • SSS-CLD-P1
  • SSS-CLD-P2 AlInGaP / Super Red 160 35.5 … 71.5 35.5 … 45.0 45.0 … 56.0 56.0 … 71.5 SSR-CLD-PQ1-1
  • SSR-CLD-P1
  • SSR-CLD-P2
  • SSR-CLD-Q1 AlInGaP / Red 160 45.0 … 90.0 45.0 … 56.0 56.0 … 71.5 71.5 … 90.0 SSO-CLD-P2Q-1
  • SSO-CLD-P2
  • SSO-CLD-Q1
  • SSO-CLD-Q2 SSO-CLD-QR1-1
  • SSO-CLD-Q1
  • SSO-CLD-Q2
  • SSO-CLD-R1 AlInGaP / Orange 160 56.0 … 112.5 56.0 … 71.5 71.5 … 90.0 90.0 … 112.5 71.5 … 140.0 71.5 … 90.0 91.0 … 112.5 112.5 … 140.0 SSY-CLD-P2Q-1
  • SSY-CLD-P2
  • SSY-CLD-Q1
  • SSY-CLD-Q2 AlInGaP / Yellow 160 56.0 … 112.5 56.0 … 71.5 71.5 … 90.0 90.0 … 112.5 SSG-CLD-M2N-1
  • SSG-CLD-M2
  • SSG-CLD-N1
  • SSG-CLD-N2 AlInGaP / Green 160 22.4 … 45.0 22.4 … 28.5 28.5 … 35.5 35.5 … 45.0 SSP-CLD-KL1-1
  • SSP-CLD-K1
  • SSP-CLD-K2
  • SSP-CLD-L1 AlInGaP / Pure Green 160 7.2 … 14.0 7.2 … 9.0 9.0 … 11.2 11.2 … 14.0 NOTE: 1. All part number above comes in a standard quantity of 3000 units per reel. 2. Luminous intensity is measured with an accuracy of ±11%. 3. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel.

19/05/05 S SpiceLED AlInGaP SSx-CLD-v3 Page 3 of 3 Wavelength Grouping. Color Group Wavelength distribution (nm) SSS, Super Red Full 625 – 640 SSR; Red Full 620 – 630 SSO; Orange Full W X Y Z 600 – 612 600 – 603 603 – 606 606 - 609 609 - 612 SSY; Yellow Full W X Y Z 582 – 594 582 – 585 585 – 588 588 - 591 591 - 594 SSG; Green Full W X Y Z 564.5 – 576.5 564.5 – 567.5 567.5 – 570.5 570.5 – 573.5 573.5 – 576.5 SSP; Pure Green Full W X Y Z 552.5 – 564.5 552.5 – 555.5 555.5 – 558.5 558.5 – 561.5 561.5 – 564.5 Dominant wavelength is measured with an accuracy of ±1 nm. Electrical Characteristics at Ta=25°C. Vf @ If = 20 mA Vr @ Ir = 10uA Minimum (V) Typical (V) Maximum (V) Min.(V) 1.8 2.0 2.4 12 Vf is measured with an accuracy of ±0.1 V.

19/05/05 S SpiceLED AlInGaP SSx-CLD-v3 Page 4 of 4 Absolute Maximum Ratings Maximum Value Unit DC forward current. 30 mA Peak pulse current. (tp ≤ 10 µs, Duty cycle = 0.1) 250 mA Reverse voltage. 12 V LED junction temperature. 110 °C Operating temperature. -40 … +100 °C Storage temperature. -40 … +100 °C Power dissipation ( at room temperature ) 80 mW Material Material Lead-frame. Cu Alloy With NiPdAu Plating. Package. High Temperature Resistant Epoxy Resin. Note: Product is Pb free.

19/05/05 S SpiceLED AlInGaP SSx-CLD-v3 Page 5 of 5 Recommended Solder Pad Note: Component is based on a new package pl atform, which features “Bottom Only Terminations”. Solder joints are only formed at the bottom of the component and solder fillet will not be observable as the sides of the component are not solderable. Surfaces are not intended for soldering.

19/05/05 S SpiceLED AlInGaP SSx-CLD-v3 Page 6 of 6 Relative intensity vs. forward current. Forward current vs. forward voltage. Intensity vs. DC Forward Current 0.2 0.4 0.6 0.8 1.2 1.4 1.6 1.8 2.2 0 102 03 0 405 06 0 Forward Current (mA) Relative intensity. Normalized at 20 mA. Forward Current vs. Forward Voltage Forward Voltage (V) Forward Current (mA) Radiation pattern. Maximum current vs. ambient temperature. o o o o o o o o o o 0.6 0.8 1.0 0.2 0.4 Max forward Current vs Temperature 10 20 30 40 50 60 70 80 90 100 Ambient Temperature Forward Current, If Relative Intensity vs. Wavelength Relative Spectra Emission 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 500 600 700 800 Wavelength (nm) Relative Intensity Green Orange Red Super Red Yellow Pure Green

19/05/05 S SpiceLED AlInGaP SSx-CLD-v3 Page 7 of 7 Taping And Orientation. Reels come in quantity of 3000 units. Reel diameter is 180 mm.

19/05/05 S SpiceLED AlInGaP SSx-CLD-v3 Page 8 of 8 Recommended Sn-Pb IR-Reflow Soldering Profile. Classification Reflow Profile (JEDEC J-STD-020C) 100 125 150 175 200 225 250 275 0 50 100 150 200 Time (sec) Temperature (oC) Preheat 60-120s 183 oC 60-150s Ramp-up 3 oC/sec Ramp-dow n 6 oC/sec max. 235-240oC 10-30s 360s max Recommended Pb Free IR-Reflow Soldering Profile. Classification Reflow Profile (JEDEC J-STD-020C) 100 125 150 175 200 225 250 275 300 0 50 100 150 200 Time (sec) Temperature (oC) Preheat 60-180s 217 oC 60-150s Ramp-up 3 oC/sec Ramp-dow n 6 oC/sec max. 260-255oC 10-30s 480s max

19/05/05 S SpiceLED AlInGaP SSx-CLD-v3 Page 9 of 9 NOTE. All the information published is considered to be reliable. However, DOMINANT Semiconductors does not assume any liability arising out of the application or use of any product described herein. DOMINANT Semiconductors reserves the right to make changes at any time without notice to any products in order to improve reliability, function or design. DOMINANT Semiconductors products are not authorized for use as critical components in life support devices or systems without the express written approval from the managing director of DOMINANT Semiconductors.