SSCM3175GA SENSORTECHNICS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Temperature compensated silicon stainless steel pressure sensors 1/2September 2001 / 540 www.sensortechnics.com
FEATURES
- 0...175 mbar gage
- For corrosive pressure media
- Excellent low temperature drift
- All welded stainless steel diaphragm construction
- For hostile environments SPECIFICATIONS Maximum ratings Supply current Temperature limits Storage Operating Compensated Vibration (20 Hz to 2000 Hz) Mechanical shock (11 ms) Proof pressure Isolation resistance @ 50 VDC 2.0 mA -40°C to 125°C -10°C to 80°C 0°C to 70°C 10 gRMS 100 g 500 mbar 50 MΩ SERVICE Media wetted parts: any liquid or vapor that is compatible with stainless steel 316 (1.4401) ELECTRICAL CONNECTION Scale: ½ cm ½ inch +Vout -Vs -Vout +Vs4 2 31 4
Temperature compensated silicon stainless steel pressure sensors 2/2 September 2001 / 540 www.sensortechnics.com PERFORMANCE CHARACTERISTICS (unless otherwise noted, IS = 1.5 mA, tamb = 25°C) Specification notes (for all devices): Proof pressure is the max. pressure which may be applied without causing damage to the sensing element. Full scale measurement at maximum operating pressure. Non-linearity - the maximum deviation of measured output at constant temperature, from "Best Straight Line" through three points (offset pressure, full scale pressure and half scale pressure). Temperature tested and guaranteed from at 70°C relative to 25°C. All specs. are shown relative to 25°C. Change in output after 1 year. Recommended o-ring 17 x 1 mm #674-70. Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the application or use of any product or circuit described herein, neither does it convey any license under its patent rights n or the rights of others. OUTLINE DRAWING mass: 10 g dimensions in mm scitsiretcarahC. niM. pyT. xaMt inU erusserpgnitarepO 571r abm tesffoerusserporeZ2 -1 ±2 Vm tuptuoelacslluF 2 055 210 02 )LSB(ytiraenil-noN 3 1.05 .0± OSF% ytilibataeperdnasiseretsyH 50.0± )C°07otC°0(stceffelamrehT 4 tesffO tuptuoelacslluF siseretsyH 5.0± 5.0± 1.0± 3.0± ecnadepmitupnI 0.4 kΩ ecnadepmituptuO0 .40 .5 0.6 ytilibatsmretgnoL 5 tesffO napS 1.0± 1.0± OSF% noitpmusnocrewoP 06W m o-ring area 2 31 4 4 places solder pads 17.3 diam. 18.9 diam. Do not touch diaphragm 5.1 3.1 1.46 typ. 12.7 flex cable typ. 50